en to fy translation catalogue (780 entries)

[ctx: RSC_QUERY_OBJECT_TYPE]
en: The table view
fy: De tabel werjefte

[ctx: RSC_QUERY_OBJECT_TYPE]
en: The query
fy: De query

[ctx: RSC_QUERY_OBJECT_TYPE]
en: The SQL statement
fy: De SQL ynstruksje

[ctx: RID_STR_CONNECTION_INVALID]
en: No connection could be established.
fy: Der koe gjin ferbining ta stân brocht wurde.

[ctx: RID_STR_TABLE_IS_FILTERED]
en: The table $name$ already exists. It is not visible because it has been filtered out.
fy: De tabel $name$ bestiet al. It is net sichtber omdat it der út filtere is.

[ctx: RID_STR_COULDNOTCONNECT_UNSPECIFIED]
en: The connection to the external data source could not be established. An unknown error occurred. The driver is probably defective.
fy: Der koe gjin ferbining mei de eksterne gegevensboarne ta stân brocht wurde. Der barde in ûnbekende flater. Wierskynlik is it stjoerprogramma net ynoarder.

[ctx: RID_STR_COULDNOTCONNECT_NODRIVER]
en: The connection to the external data source could not be established. No SDBC driver was found for the URL '$name$'.
fy: De ferbining mei de eksterne gegevensboarne koe net ta stân brocht wurde. Der is gjin SDBC stjoerprogramma fûn foar de URL-adres '$name$'.

[ctx: RID_STR_COULDNOTLOAD_MANAGER]
en: The connection to the external data source could not be established. The SDBC driver manager could not be loaded.
fy: Der ferbining mei de eksterne gegevensboarne koe net ta stân brocht wurde. It SDBC stjoerprogramma behear koe net laden wurde.

[ctx: RID_STR_FORM]
en: Form
fy: Formulier

[ctx: RID_STR_REPORT]
en: Report
fy: Rapport

[ctx: RID_STR_DATASOURCE_NOT_STORED]
en: The data source was not saved. Please use the interface XStorable to save the data source.
fy: De gegevensboarne is net bewarre. Brûk de ynterfaasje XStorable om de gegevensboarne te bewarjen.

[ctx: RID_STR_ONLY_QUERY]
en: The given command is not a SELECT statement.
    Only queries are allowed.
fy: De opjûne opdracht is gjin SELECT-ynstruksje.
    Allinne query's binne tastien.

[ctx: RID_STR_NO_VALUE_CHANGED]
en: No values were modified.
fy: Gjin wearden binne feroare.

[ctx: RID_STR_NO_XROWUPDATE]
en: Values could not be inserted. The XRowUpdate interface is not supported by ResultSet.
fy: Wearden kinne net ynfoege wurde. De XRowUpdate ynterfaasje wurdt net stipe troch ResultSet.

[ctx: RID_STR_NO_XRESULTSETUPDATE]
en: Values could not be inserted. The XResultSetUpdate interface is not supported by ResultSet.
fy: Wearden kinne net ynfoege wurde. De XResultSetUpdate ynterfaasje wurdt net stipe troch ResultSet.

[ctx: RID_STR_NO_UPDATE_MISSING_CONDITION]
en: Values could not be modified, due to a missing condition statement.
fy: Wearden kinne net feroare wurde, om in missende foarweardeynstruksje.

[ctx: RID_STR_NO_COLUMN_ADD]
en: The adding of columns is not supported.
fy: It taheakjen fan kolommen wurdt net stipe.

[ctx: RID_STR_NO_COLUMN_DROP]
en: The dropping of columns is not supported.
fy: It ferfallen fan kolommen wurdt net stipe.

[ctx: RID_STR_NO_CONDITION_FOR_PK]
en: The WHERE condition could not be created for the primary key.
fy: De WHERE kondysje kin net makke wurde foar de primêre kaai.

[ctx: RID_STR_COLUMN_UNKNOWN_PROP]
en: The column does not support the property '%value'.
fy: De kolom stipet net de eigenskip '%value'.

[ctx: RID_STR_COLUMN_NOT_SEARCHABLE]
en: The column is not searchable!
fy: De kolom is net trochsykber!

[ctx: RID_STR_NOT_SEQUENCE_INT8]
en: The value of the columns is not of the type Sequence<sal_Int8>.
fy: De wearde fan de kolommen is net fan it type Sequence<sal_Int8>.

[ctx: RID_STR_COLUMN_NOT_VALID]
en: The column is not valid.
fy: De kolom is net jildich.

[ctx: RID_STR_COLUMN_MUST_VISIBLE]
en: The column '%name' must be visible as a column.
fy: De kolom '%name' moat sichtber wêze as in kolom.

[ctx: RID_STR_NO_XQUERIESSUPPLIER]
en: The interface XQueriesSupplier is not available.
fy: De ynterfaasje XQueriesSupplier is net beskikber.

[ctx: RID_STR_NO_ABS_ZERO]
en: An 'absolute(0)' call is not allowed.
fy: In 'absolute(0)' oanrop is net tastien.

[ctx: RID_STR_NO_RELATIVE]
en: Relative positioning is not allowed in this state.
fy: Relatieve lizzing is net tastien is dizze tastân.

[ctx: RID_STR_NO_REFESH_AFTERLAST]
en: A row cannot be refreshed when the ResultSet is positioned after the last row.
fy: In rige kin net ferfarske wurde wannear de ResultSet efter de lêste rige posisjonearre is.

[ctx: RID_STR_NO_MOVETOINSERTROW_CALLED]
en: A new row cannot be inserted when the ResultSet is not first moved to the insert row.
fy: In nije rige kin net ynfoege wirde wannear de resultSet net earst nei de ynfoegrige ferpleatst is.

[ctx: RID_STR_NO_UPDATEROW]
en: A row cannot be modified in this state
fy: In rige kin net feroare wurde yn dizze tastân

[ctx: RID_STR_NO_DELETEROW]
en: A row cannot be deleted in this state.
fy: In rige kin net wiske wurde yn dizze tastân.

[ctx: RID_STR_NO_TABLE_RENAME]
en: The driver does not support table renaming.
fy: It stjoerprogramma stipet it omneamen fan tabellen net.

[ctx: RID_STR_COLUMN_ALTER_BY_NAME]
en: The driver does not support the modification of column descriptions by changing the name.
fy: It stjoerprogramma stipet it feroarjen fan kolom beskriuwingen troch de namme te feroarjen net.

[ctx: RID_STR_COLUMN_ALTER_BY_INDEX]
en: The driver does not support the modification of column descriptions by changing the index.
fy: It stjoerprogramma stipet it feroarjen fan kolom beskriuwingen troch de yndeks te feroarjen net.

[ctx: RID_STR_FILE_DOES_NOT_EXIST]
en: The file "$file$" does not exist.
fy: De triem "$file$" bestiet net.

[ctx: RID_STR_TABLE_DOES_NOT_EXIST]
en: There exists no table named "$table$".
fy: Der is gjin tabel mei de namme "$table$".

[ctx: RID_STR_QUERY_DOES_NOT_EXIST]
en: There exists no query named "$table$".
fy: Der is gjin query mei de namme "$table$".

[ctx: RID_STR_CONFLICTING_NAMES]
en: There are tables in the database whose names conflict with the names of existing queries. To make full use of all queries and tables, make sure they have distinct names.
fy: De namme fan guon tabellen yn de gegevensbank jout konflikten mei de namme fan besteande quert's. Soargje derfoar dat alle query's en tabellen dúdlik ferskillende nammen ha om se optimaal brûkte te kinnen.

[ctx: RID_STR_COMMAND_LEADING_TO_ERROR]
en: The SQL command leading to this error is:
    
    $command$
fy: De SQL-opdracht dy't de flater feroarsaket is:
    
    $command$

[ctx: RID_STR_STATEMENT_WITHOUT_RESULT_SET]
en: The SQL command does not describe a result set.
fy: De SQL-opdracht beskriuwt gjin resultaten set.

[ctx: RID_STR_NAME_MUST_NOT_BE_EMPTY]
en: The name must not be empty.
fy: De namme kin net leech wêze.

[ctx: RID_STR_NO_NULL_OBJECTS_IN_CONTAINER]
en: The container cannot contain NULL objects.
fy: De kontener kin net NULL objekten befetsje.

[ctx: RID_STR_NAME_ALREADY_USED]
en: There already is an object with the given name.
fy: Der is al in objekt mei de opjûne namme.

[ctx: RID_STR_OBJECT_CONTAINER_MISMATCH]
en: This object cannot be part of this container.
fy: Dit objekt kin gjin diel útmeitsje fan dizze kontener.

[ctx: RID_STR_OBJECT_ALREADY_CONTAINED]
en: The object already is, with a different name, part of the container.
fy: Dit objekt is al, mei in oare namme, diel fan de kontener.

[ctx: RID_STR_NAME_NOT_FOUND]
en: Unable to find the document '$name$'.
fy: Dokumint '$name$' is net fûn.

[ctx: RID_STR_ERROR_WHILE_SAVING]
en: Could not save the document to $location$:
    $message$
fy: Koe dokumint net bewarje nei $location$:
    $message$

[ctx: RID_NO_SUCH_DATA_SOURCE]
en: Error accessing data source '$name$':
    $error$
fy: Flater by tagong ta gegevensboarne '$name$':
    $error$

[ctx: RID_STR_NO_SUB_FOLDER]
en: There exists no folder named "$folder$".
fy: Der is al in map mei de namme "$folder$".

[ctx: RID_STR_NO_DELETE_BEFORE_AFTER]
en: Cannot delete the before-first or after-last row.
fy: Kin de foarlêste rige of de rige nei de lêste net wiskje.

[ctx: RID_STR_NO_DELETE_INSERT_ROW]
en: Cannot delete the insert-row.
fy: Kin de ynfoeg rige net wiskje.

[ctx: RID_STR_RESULT_IS_READONLY]
en: Result set is read only.
fy: De resultaten binne allinne-lêzen.

[ctx: RID_STR_NO_DELETE_PRIVILEGE]
en: DELETE privilege not available.
fy: DELETE privileezje is net beskikber.

[ctx: RID_STR_ROW_ALREADY_DELETED]
en: Current row is already deleted.
fy: Aktuele rige is al wiske.

[ctx: RID_STR_UPDATE_FAILED]
en: Current row could not be updated.
fy: Aktuele rige kin net fernijd wurde.

[ctx: RID_STR_NO_INSERT_PRIVILEGE]
en: INSERT privilege not available.
fy: INSERT privileezje is net beskikber.

[ctx: RID_STR_INTERNAL_ERROR]
en: Internal error: no statement object provided by the database driver.
fy: Ynterne flater: gjin ynstruksje objekt opjûn troch it stjoerprogramma fan de gegevensbank.

[ctx: RID_STR_EXPRESSION1]
en: Expression1
fy: Ekspresje 1

[ctx: RID_STR_NO_SQL_COMMAND]
en: No SQL command was provided.
fy: Gjin SQL-opdracht is jûn.

[ctx: RID_STR_INVALID_INDEX]
en: Invalid column index.
fy: Unjildich kolom yndeks.

[ctx: RID_STR_INVALID_CURSOR_STATE]
en: Invalid cursor state.
fy: Unjildige rinnerke tastân.

[ctx: RID_STR_CURSOR_BEFORE_OR_AFTER]
en: The cursor points to before the first or after the last row.
fy: It rinnerke wiist of foar de earste of nei de lêste rige.

[ctx: RID_STR_NO_BOOKMARK_BEFORE_OR_AFTER]
en: The rows before the first and after the last row don't have a bookmark.
fy: De rigen foar de earste en nei de lêste rige ha gjin blêdwizer.

[ctx: RID_STR_NO_BOOKMARK_DELETED]
en: The current row is deleted, and thus doesn't have a bookmark.
fy: De aktuele rige is wiske, en dan hat der gjin blêdwizer.

[ctx: RID_STR_CONNECTION_REQUEST]
en: A connection for the following URL was requested "$name$".
fy: In ferbining foar it folgjende URL-adres wurde frege "$name$".

[ctx: RID_STR_MISSING_EXTENSION]
en: The extension is not installed.
fy: De tafoeging is net ynstallearre.

[ctx: STR_QUERY_AND_TABLE_DISTINCT_NAMES]
en: You cannot give a table and a query the same name. Please use a name which is not yet used by a query or table.
fy: Jo kinne net in tabel en in query deselde namme jaan. Brûk in namme dy't noch net troch in query of tabel brûkt wurdt.

[ctx: STR_BASENAME_TABLE]
en: Table
fy: Tabel

[ctx: STR_BASENAME_QUERY]
en: Query
fy: Fersyk

[ctx: STR_CONN_WITHOUT_QUERIES_OR_TABLES]
en: The given connection is no valid query and/or tables supplier.
fy: De opjûne ferbining is gjin jildige boarne fan query's en/of tabellen.

[ctx: STR_NO_TABLE_OBJECT]
en: The given object is no table object.
fy: De opjûne objekt is gjin tabel objekt.

[ctx: STR_INVALID_COMPOSITION_TYPE]
en: Invalid composition type - need a value from com.sun.star.sdb.tools.CompositionType.
fy: Unjildige gearstalling type - der is in wearde nedich fan com.sun.star.sdb.tools.CompositionType.

[ctx: STR_INVALID_COMMAND_TYPE]
en: Invalid command type - only TABLE and QUERY from com.sun.star.sdb.CommandType are allowed.
fy: Unjildige type opdracht - allinne TABLE en QUERY fan com.sun.star.sdb.CommandType binne tastien.

[ctx: STR_STATE_CLOSE_SUB_DOCS]
en: Prepare
fy: Tariede

[ctx: STR_STATE_BACKUP_DBDOC]
en: Backup Document
fy: Reservekopy dokumint

[ctx: STR_STATE_MIGRATE]
en: Migrate
fy: Migrearje

[ctx: STR_STATE_SUMMARY]
en: Summary
fy: Oersicht

[ctx: STR_FORM]
note: To translators: This refers to a form documen    t inside a database document.
en: Form '$name$'
fy: Formulier '$name$'

[ctx: STR_REPORT]
note: To translators: This refers to a report docum    ent inside a database document.
en: Report '$name$'
fy: Rapport '$name$'

[ctx: STR_OVERALL_PROGRESS]
en: document $current$ of $overall$
fy: dokumint $current$ fan 'e $overall$

[ctx: STR_DATABASE_DOCUMENT]
en: Database Document
fy: Gegevensbank dokumint

[ctx: STR_SAVED_COPY_TO]
en: saved copy to $location$
fy: kopy bewarre yn $location$

[ctx: STR_MOVED_LIBRARY]
en: migrated $type$ library '$old$' to '$new$'
fy: migrearre $type$ biblioteek '$old$' nei '$new$'

[ctx: STR_LIBRARY_TYPE_AND_NAME]
en: $type$ library '$library$'
fy: $type$ biblioteek '$library$'

[ctx: STR_MIGRATING_LIBS]
en: migrating libraries ...
fy: biblioteken migrearje ...

[ctx: STR_JAVA_SCRIPT]
en: JavaScript
fy: JavaSkript

[ctx: STR_DIALOG]
en: dialog
fy: dialoochskerm

[ctx: STR_ERRORS]
en: Error(s)
fy: Flater(s)

[ctx: STR_WARNINGS]
en: Warnings
fy: Warskôgingen

[ctx: STR_EXCEPTION]
en: caught exception:
fy: útsûndering fûn:

[ctx: STR_INVALID_BACKUP_LOCATION]
en: You need to choose a backup location other than the document location itself.
fy: Jo moatte in lokaasje kieze foar de reservekopy, mar it mei net de lokaasje fan it dokumint wêze.

[ctx: STR_INVALID_NUMBER_ARGS]
en: Invalid number of initialization arguments. Expected 1.
fy: Unjildich tal arguminten foar inisjalisaasje. Ferwachte 1.

[ctx: STR_NO_DATABASE]
en: No database document found in the initialization arguments.
fy: Gjin gegevensbank dokumint fûn yn de arguminten foar de inisjalisaasje.

[ctx: STR_NOT_READONLY]
en: Not applicable to read-only documents.
fy: Net ta te passen op allinne-lêzen dokuminten.

[ctx: STR_QUERY_UNDO_TABWINSHOW]
en: Add Table Window
fy: Tabelfinster taheakje

[ctx: STR_QUERY_UNDO_MOVETABWIN]
en: Move table window
fy: Tabelfinster ferpleatse

[ctx: STR_QUERY_UNDO_INSERTCONNECTION]
en: Insert Join
fy: Join ynfoegje

[ctx: STR_QUERY_UNDO_REMOVECONNECTION]
en: Delete Join
fy: Join wiskje

[ctx: STR_QUERY_UNDO_SIZETABWIN]
en: Resize table window
fy: Tabelfinster fan grutte feroarje

[ctx: STR_QUERY_UNDO_TABFIELDDELETE]
en: Delete Column
fy: Kolom wiskje

[ctx: STR_QUERY_UNDO_TABFIELDMOVED]
en: Move column
fy: Kolom ferpleatse

[ctx: STR_QUERY_UNDO_TABFIELDCREATE]
en: Add Column
fy: Kolom taheakje

[ctx: RID_STR_FIELD_DOESNT_EXIST]
en: Invalid expression, field name '$name$' does not exist.
fy: Unjildige ekspresje, de fjildnamme '$name$' bestiet net.

[ctx: STR_QUERY_UNDO_TABWINDELETE]
en: Delete Table Window
fy: Tabelfinster wiskje

[ctx: STR_QUERY_UNDO_MODIFY_CELL]
en: Edit Column Description
fy: Kolom beskriuwing bewurkje

[ctx: STR_QUERY_UNDO_SIZE_COLUMN]
en: Adjust column width
fy: Kolombreedte oanpasse

[ctx: STR_QUERY_SORTTEXT]
en: (not sorted);ascending;descending
fy: (net sortearre);oprinnend;ôfrinnend

[ctx: STR_QUERY_FUNCTIONS]
en: (no function);Group
fy: (gjin funksje);Groepearje

[ctx: STR_QUERY_NOTABLE]
en: (no table)
fy: (gjin tabel)

[ctx: STR_QRY_ORDERBY_UNRELATED]
en: The database only supports sorting for visible fields.
fy: De gegevensbank stipet allinne de sortearring fan sichtbere fjilden.

[ctx: STR_QUERY_HANDLETEXT]
en: Field;Alias;Table;Sort;Visible;Function;Criterion;Or;Or
fy: Fjild;Alias;Tabel;Sortearring;Sichtber;Funksje;Kritearia;Of;Of

[ctx: STR_QUERY_LIMIT_ALL]
en: All
fy: Alle

[ctx: STR_QRY_TOO_MANY_COLUMNS]
en: There are too many columns.
fy: Der binne tefolle kolommen.

[ctx: STR_QRY_CRITERIA_ON_ASTERISK]
en: A condition cannot be applied to field [*]
fy: In foarwearde foar fjild [*] kin net tapast wurde

[ctx: STR_QRY_TOO_LONG_STATEMENT]
en: The SQL statement created is too long.
fy: De SQL ynstruksje is te lang.

[ctx: STR_QRY_TOOCOMPLEX]
en: Query is too complex
fy: De query is te kompleks

[ctx: STR_QRY_NOSELECT]
en: Nothing has been selected.
fy: Der is neat selektearre.

[ctx: STR_QRY_SYNTAX]
en: SQL syntax error
fy: SQL syntaksis flater

[ctx: STR_QRY_ORDERBY_ON_ASTERISK]
en: [*] cannot be used as a sort criterion.
fy: [*] kin net brûkt wurde as kritearia fan sortearjen.

[ctx: STR_QRY_TOO_MANY_TABLES]
en: There are too many tables.
fy: Der binne tefolle tabellen.

[ctx: STR_QRY_NATIVE]
en: The statement will not be applied when querying in the SQL dialect of the database.
fy: De ynstruksje sil net tapast wurde by in SQL dialekt query fan de gegevensbank.

[ctx: STR_QRY_ILLEGAL_JOIN]
en: Join could not be processed
fy: Join koe net ferwurke wurde

[ctx: STR_SVT_SQL_SYNTAX_ERROR]
en: Syntax error in SQL statement
fy: Syntaksis flater yn SQL ynstruksje

[ctx: STR_QUERYDESIGN_NO_VIEW_SUPPORT]
en: This database does not support table views.
fy: Dizze gegevensbank stipet gjin tabel werjeften.

[ctx: STR_NO_ALTER_VIEW_SUPPORT]
en: This database does not support altering of existing table views.
fy: Dizze gegevensbank stipet gjin feroaringen fan besteande tabel werjeften.

[ctx: STR_QUERYDESIGN_NO_VIEW_ASK]
en: Do you want to create a query instead?
fy: Wolle ynstee dêrfan in query meitsje?

[ctx: STR_DATASOURCE_DELETED]
en: The corresponding data source has been deleted. Therefore, data relevant to that data source cannot be saved.
fy: De byhearrende gegevensboarne is wiske. De gegevens dy relevant binne oan dy gegevensboarne kinne net bewarre wurde.

[ctx: STR_QRY_COLUMN_NOT_FOUND]
en: The column '$name$' is unknown.
fy: De kolom '$name$' is ûnbekend.

[ctx: STR_QRY_JOIN_COLUMN_COMPARE]
en: Columns can only be compared using '='.
fy: Kolommen kinne allinne ferlike wurde mei help fan '='.

[ctx: STR_QRY_LIKE_LEFT_NO_COLUMN]
en: You must use a column name before 'LIKE'.
fy: Jo moatte foarôfgeand oan 'LIKE' in kolomnamme brûke.

[ctx: STR_QRY_CHECK_CASESENSITIVE]
en: The column could not be found. Please note that the database is case-sensitive.
fy: De kolom koe net fûn wurde. Tink derom dat de gegevensbank haadletter gefoelich is.

[ctx: STR_QUERY_SAVEMODIFIED]
note: To translators: for $object$, one of the values of the RSC_QUERY_OBJECT_TYPE resource will be inserted.
en: $object$ has been changed.
    Do you want to save the changes?
fy: $object$ is feroare.
    Wolle jo de feroaringen bewarje?

[ctx: STR_ERROR_PARSING_STATEMENT]
note: To translators: for $object$, one of the values of the RSC_QUERY_OBJECT_TYPE resource (except \"SQL command\", which doesn't make sense here) will be inserted.
en: $object$ is based on an SQL command which could not be parsed.
fy: $object$ is basearre op in SQL opdracht hokker net opdielt koe wurde.

[ctx: STR_INFO_OPENING_IN_SQL_VIEW]
note: To translators: for $object$, one of the values of the RSC_QUERY_OBJECT_TYPE resource (except \"SQL command\", which doesn't make sense here) will be inserted.
en: $object$ will be opened in SQL view.
fy: $object$ sil iepene wurde yn in SQL werjefte.

[ctx: STR_STATEMENT_WITHOUT_RESULT_SET]
en: The query does not create a result set, and thus cannot be part of another query.
fy: De query makket gjin resultaten set en kin dêrfoar gjin diel útmeitsje fan in oare query.

[ctx: RID_STR_COLUMN_FORMAT]
en: Column ~Format...
fy: Kolom ~yndieling...

[ctx: RID_STR_COLUMN_WIDTH]
en: Column ~Width...
fy: Kolom ~breedte...

[ctx: RID_STR_TABLE_FORMAT]
en: Table Format...
fy: Tabel yndieling...

[ctx: RID_STR_ROW_HEIGHT]
en: Row Height...
fy: Rige hichte...

[ctx: RID_STR_COPY]
en: ~Copy
fy: ~Kopiearje

[ctx: RID_STR_UNDO_MODIFY_RECORD]
en: Undo: Data Input
fy: Ungedien meitsje: Gegevens ynfier

[ctx: RID_STR_SAVE_CURRENT_RECORD]
en: Save current record
fy: Aktuele record bewarje

[ctx: STR_TBL_TITLE]
en: Table #
fy: Tabel #

[ctx: STR_VIEW_TITLE]
en: View #
fy: Werjefte #

[ctx: STR_NAME_ALREADY_EXISTS]
en: The name "#" already exists.
fy: De namme "#" bestiet al.

[ctx: STR_NO_COLUMNNAME_MATCHING]
en: No matching column names were found.
fy: Gjin oerienkommende kolomnammen fûn.

[ctx: STR_ERROR_OCCURRED_WHILE_COPYING]
en: An error occurred. Do you want to continue copying?
fy: Der barde in flater. Wolle jo trochgean mei kopiearjen?

[ctx: STR_DATASOURCE_GRIDCONTROL_NAME]
en: Data source table view
fy: Werjefte gegevensboarne tabel

[ctx: STR_DATASOURCE_GRIDCONTROL_DESC]
en: Shows the selected table or query.
fy: Lit de selektearre tabel of query sjen.

[ctx: STR_QUERY_UNDO_MODIFYSQLEDIT]
en: Modify SQL statement(s)
fy: SQL-ynstruksje(s) oanpasse

[ctx: RID_STR_NEW_FORM]
en: Create Form in Design View...
fy: Formulier meitsje yn ûntwerpwerjefte...

[ctx: RID_STR_NEW_FORM_AUTO]
en: Use Wizard to Create Form...
fy: Formulier meitsje mei assistint...

[ctx: RID_STR_NEW_REPORT_AUTO]
en: Use Wizard to Create Report...
fy: Rapport meitsje mei assistint...

[ctx: RID_STR_NEW_REPORT]
en: Create Report in Design View...
fy: Rapport meitsje yn ûntwerpwerjefte...

[ctx: RID_STR_NEW_QUERY]
en: Create Query in Design View...
fy: Query meitsje yn ûntwerpwerjefte...

[ctx: RID_STR_NEW_QUERY_SQL]
en: Create Query in SQL View...
fy: Query meitsje yn SQL werjefte...

[ctx: RID_STR_NEW_QUERY_AUTO]
en: Use Wizard to Create Query...
fy: Query meitsje mei assistint...

[ctx: RID_STR_NEW_TABLE]
en: Create Table in Design View...
fy: Tabel meitsje yn ûntwerpwerjefte...

[ctx: RID_STR_NEW_TABLE_AUTO]
en: Use Wizard to Create Table...
fy: Tabel meitsje mei assistint...

[ctx: RID_STR_NEW_VIEW]
en: Create View...
fy: Werjefte oanmeitsje...

[ctx: RID_STR_FORMS_CONTAINER]
en: Forms
fy: Formulieren

[ctx: RID_STR_REPORTS_CONTAINER]
en: Reports
fy: Rapporten

[ctx: RID_STR_REPORTS_HELP_TEXT_WIZARD]
en: The wizard will guide you through the steps necessary to create a report.
fy: De assistint sil jo liede by de stappen dy't nedich binne om in rapport te meitsjen.

[ctx: RID_STR_FORMS_HELP_TEXT]
en: Create a form by specifying the record source, controls, and control properties.
fy: In formulier oanmeitsje troch de record boarne, bestjoering eleminten, en eigenskippen fan bestjoeringseleminten oan te tsjutten.

[ctx: RID_STR_REPORT_HELP_TEXT]
en: Create a report by specifying the record source, controls, and control properties.
fy: In rapport oanmeitsje troch de record boarne bestjoeringseleminten, en eigenskippen fan bestjoeringseleminten oan te tsjutten.

[ctx: RID_STR_FORMS_HELP_TEXT_WIZARD]
en: The wizard will guide you through the steps necessary to create a form.
fy: De assistint sil jo liede by de stappen dy't nedich binne om in formulier te meitsjen.

[ctx: RID_STR_QUERIES_HELP_TEXT]
en: Create a query by specifying the filters, input tables, field names, and properties for sorting or grouping.
fy: In query oanmeitsje troch de filters, ynfiertabellen, fjildnammen en eigenskippen foar sortearjen of groepearjen oan te tsjutten.

[ctx: RID_STR_QUERIES_HELP_TEXT_SQL]
en: Create a query by entering an SQL statement directly.
fy: In query meitsje troch rjochtstreeks in SQL ynstruksje yn te fieren.

[ctx: RID_STR_QUERIES_HELP_TEXT_WIZARD]
en: The wizard will guide you through the steps necessary to create a query.
fy: De assistint sil jo liede by de stappen dy't nedich binne om in query te meitsjen.

[ctx: RID_STR_TABLES_HELP_TEXT_DESIGN]
en: Create a table by specifying the field names and properties, as well as the data types.
fy: In tabel meitsje troch de fjildnammen en eigenskippen, en de gegevenstypen oan te tsjutten.

[ctx: RID_STR_TABLES_HELP_TEXT_WIZARD]
en: Choose from a selection of business and personal table samples, which you customize to create a table.
fy: In kar meitsje út saaklike en persoanlike tabel foarbylden, dy't jo oanpasse kinne om in tabel te meitsjen.

[ctx: RID_STR_VIEWS_HELP_TEXT_DESIGN]
en: Create a view by specifying the tables and field names you would like to have visible.
fy: In werjefte oanmeitsje troch de tabellen en fjildnammen dy't jo sjen litte wolle oan te tsjutten.

[ctx: STR_DATABASE]
en: Database
fy: Gegevensbank

[ctx: STR_TASKS]
en: Tasks
fy: Taken

[ctx: STR_DESCRIPTION]
en: Description
fy: Beskriuwing

[ctx: STR_PREVIEW]
en: Preview
fy: Foarbyld

[ctx: STR_QUERY_CLOSEDOCUMENTS]
en: The connection type has been altered.
    For the changes to take effect, all forms, reports, queries and tables must be closed.
    
    Do you want to close all documents now?
fy: It type ferbining is feroare.
    Om de feroaringen aktyf te meitsjen, moatte alle formulieren, rapporten, query's en tabellen sluten wurde.
    
    Wolle jo alle dokuminten no slute?

[ctx: STR_FRM_LABEL]
en: F~orm name
fy: F~ormuliernamme

[ctx: STR_RPT_LABEL]
en: ~Report name
fy: ~Rapportnamme

[ctx: STR_FOLDER_LABEL]
en: F~older name
fy: M~apnamme

[ctx: STR_SUB_DOCS_WITH_SCRIPTS]
en: The document contains forms or reports with embedded macros.
fy: It dokumint befettet formulieren of rapporten mei ynbêde makro's.

[ctx: STR_SUB_DOCS_WITH_SCRIPTS_DETAIL]
en: Macros should be embedded into the database document itself.
    
    You can continue to use your document as before, however, you are encouraged to migrate your macros. The menu item 'Tools / Migrate Macros ...' will assist you with this.
    
    Note that you won't be able to embed macros into the database document itself until this migration is done.
fy: Makro's sûnen yn de gegevensbank dokumint sels ynbêde wurde moatte.
    
    Jo kinne trochgean mei it dokumint te brûken as earder, mar jo wurde advisearre om makro's te migrearjen. It menu item 'Ekstra / Makro's migrearje ...' sil jo by dit assistearje.
    
    Tink derom dat jo gjin makro's yn de gegevensbank dokumint ynbêde kinne oan 't dizze migraasje ree is.

[ctx: RID_STR_EMBEDDED_DATABASE]
en: Embedded database
fy: Ynbêde gegevensbank

[ctx: RID_STR_NO_DIFF_CAT]
en: You cannot select different categories.
fy: Jo kinne gjin ferskillende kategoryen selektearje.

[ctx: RID_STR_UNSUPPORTED_OBJECT_TYPE]
en: Unsupported object type found ($type$).
fy: Net stipe objekt type fûn ($type$).

[ctx: STR_PAGETITLE_GENERAL]
en: Advanced Properties
fy: Avansearre eigenskippen

[ctx: STR_PAGETITLE_ADVANCED]
en: Additional Settings
fy: Oanfoljende ynstellingen

[ctx: STR_PAGETITLE_CONNECTION]
en: Connection settings
fy: Ferbiningen ynstellingen

[ctx: STR_TBL_LABEL]
en: ~Table Name
fy: ~Tabelnamme

[ctx: STR_QRY_LABEL]
en: ~Query name
fy: ~Namme fan query

[ctx: STR_TITLE_RENAME]
en: Rename to
fy: Omneame nei

[ctx: STR_TITLE_PASTE_AS]
en: Insert as
fy: Ynfoegje as

[ctx: STR_QUERY_BRW_DELETE_ROWS]
en: Do you want to delete the selected data?
fy: Wolle jo de selektearre gegevens wiskje?

[ctx: SBA_BROWSER_SETTING_ORDER]
en: Error setting the sort criteria
fy: Flater by it ynstellen fan sortearkritearia

[ctx: SBA_BROWSER_SETTING_FILTER]
en: Error setting the filter criteria
fy: Flater by it ynstellen fan filterkritearia

[ctx: RID_STR_CONNECTION_LOST]
en: Connection lost
fy: Ferbining ferbrutsen

[ctx: RID_STR_QUERIES_CONTAINER]
en: Queries
fy: Query's

[ctx: RID_STR_TABLES_CONTAINER]
en: Tables
fy: Tabellen

[ctx: STR_TITLE_CONFIRM_DELETION]
en: Confirm Deletion
fy: Wiskjen befêstigje

[ctx: STR_QUERY_DELETE_TABLE]
en: Do you want to delete the table '%1'?
fy: Wolle jo de tabel '%1' wiskje?

[ctx: STR_QUERY_CONNECTION_LOST]
en: The connection to the database has been lost. Do you want to reconnect?
fy: De ferbining mei de gegevensbank is ferbrutsen. Wolle jo op 'e nij ferbine?

[ctx: STR_OPENTABLES_WARNINGS]
en: Warnings encountered
fy: Warskôgingen tsjinkaam

[ctx: STR_OPENTABLES_WARNINGS_DETAILS]
en: While retrieving the tables, warnings were reported by the database connection.
fy: By it opheljen fan de tabellen binne warskôgingen rapportearre troch de gegevensbank ferbining.

[ctx: STR_CONNECTING_DATASOURCE]
en: Connecting to "$name$" ...
fy: Ferbine mei "$name$" ...

[ctx: STR_LOADING_QUERY]
en: Loading query $name$ ...
fy: Query $name$ wurdt laden ...

[ctx: STR_LOADING_TABLE]
en: Loading table $name$ ...
fy: Tabel $name$ wurdt laden ...

[ctx: STR_NO_TABLE_FORMAT_INSIDE]
en: No table format could be found.
fy: Gjin tabel yndieling fûn.

[ctx: STR_COULDNOTCONNECT_DATASOURCE]
en: The connection to the data source "$name$" could not be established.
fy: De ferbining mei de gegevensboarne "$name$" koe net ta stân komme.

[ctx: STR_TABLEDESIGN_DBFIELDTYPES]
en: Unknown;Text;Number;Date/Time;Date;Time;Yes/No;Currency;Memo;Counter;Image;Text (fix);Decimal;Binary (fix);Binary;BigInt;Double;Float;Real;Integer;Small Integer;Tiny Integer;SQL Null;Object;Distinct;Structure;Field;BLOB;CLOB;REF;OTHER;Bit (fix)
fy: Unbekend;Tekst;Nummer;Datum/Tiid;Datum;Tiid;Jawis/Nee;Faluta;Memo;Teller;Ofbylding;Tekst (fêst);Desimaal;Binêr (fêst);Binêr;BigInt;Dûbel;Float;Real;Hiel getal;Lyts gehiel getal;Hiel lytsgehiel getal;SQL Null;Objekt;Distinct;Struktuer;Fjild;BLOB;CLOB;REF;OARS;Bit (fêst)

[ctx: STR_TABLEDESIGN_UNDO_PRIMKEY]
en: Insert/remove primary key
fy: Primêre kaai ynfoegje/wiskje

[ctx: STR_VALUE_YES]
en: Yes
fy: Ja

[ctx: STR_VALUE_NO]
en: No
fy: Nee

[ctx: STR_VALUE_NONE]
note: Note: should somehow fit to the word "value" in other languages as well: value - none ....
en: <none>
fy: <gjint>

[ctx: STR_TAB_FIELD_NAME]
en: Field name
fy: Fjildnamme

[ctx: STR_TAB_FIELD_COLUMN_NAME]
en: Field Name
fy: Fjildnamme

[ctx: STR_TAB_FIELD_DATATYPE]
en: Field ~type
fy: Fjild ~type

[ctx: STR_TAB_FIELD_COLUMN_DATATYPE]
en: Field Type
fy: Fjild type

[ctx: STR_TAB_HELP_TEXT]
en: Description
fy: Beskriuwing

[ctx: STR_COLUMN_DESCRIPTION]
en: Column Description
fy: Kolombeskriuwing

[ctx: STR_FIELD_AUTOINCREMENT]
en: ~AutoValue
fy: ~AutoWearde

[ctx: STR_TAB_PROPERTIES]
en: Field Properties
fy: Fjild eigenskippen

[ctx: STR_TABED_UNDO_CELLMODIFIED]
en: Modify cell
fy: Sel feroarje

[ctx: STR_TABED_UNDO_ROWDELETED]
en: Delete row
fy: Rige wiskje

[ctx: STR_TABED_UNDO_TYPE_CHANGED]
en: Modify field type
fy: Fjild type oanpasse

[ctx: STR_TABED_UNDO_ROWINSERTED]
en: Insert row
fy: Rige ynfoegje

[ctx: STR_TABED_UNDO_NEWROWINSERTED]
en: Insert new row
fy: Nije rige ynfoegje

[ctx: STR_DEFAULT_VALUE]
en: ~Default value
fy: ~Standert wearde

[ctx: STR_FIELD_REQUIRED]
en: ~Entry required
fy: ~Ynfier fereaske

[ctx: STR_TEXT_LENGTH]
en: ~Length
fy: ~Lingte

[ctx: STR_LENGTH]
en: ~Length
fy: ~Lingte

[ctx: STR_SCALE]
en: Decimal ~places
fy: Tal de~simalen

[ctx: STR_FORMAT]
en: Format example
fy: Yndieling foarbyld

[ctx: STR_HELP_BOOL_DEFAULT]
en: Select a value that is to appear in all new records as default.
    If the field is not to have a default value, select the empty string.
fy: Selektearje in wearde dy yn elk nije ynfierde record as standert ferskine moat.
    As it fjild gjin standert wearde hat, selektearje dan in lege tekenrige.

[ctx: STR_HELP_DEFAULT_VALUE]
en: Enter a default value for this field.
    
    When you later enter data in the table, this string will be used in each new record for the field selected. It should, therefore, correspond to the cell format that needs to be entered below.
fy: Fier in standert wearde yn foar dit fjild.
    
    As jo letter gegevens ynfierd yn de tabel, wurdt dizze tekenrige yn elk nij record brûkt foar it selektearre fjild. De tekenrige moat dêrom kommunisearje mei de hjirnei te definiearje sel yndieling.

[ctx: STR_HELP_FIELD_REQUIRED]
en: Activate this option if this field cannot contain NULL values, i.e. the user must always enter data.
fy: Aktivearje dizze opsje as yn it fjild gjin NULL wearden tastien binne, Oftewol, dat de brûker hjir altyd wat ynfolle moat.

[ctx: STR_HELP_TEXT_LENGTH]
en: Enter the maximum text length permitted.
fy: Jou de maksimale tekstlingte op.

[ctx: STR_HELP_NUMERIC_TYPE]
en: Enter the number format.
fy: Jou it getal yndieling op.

[ctx: STR_HELP_LENGTH]
en: Determine the length data can have in this field.
    
    If decimal fields, then the maximum length of the number to be entered, if binary fields, then the length of the data block.
    The value will be corrected accordingly when it exceeds the maximum for this database.
fy: Jou de lingte fan dit fjild type op.
    
    Foar desimale fjilden is dit de maksimale lingte fan it yn te foljen getal, foar binêre fjilden de lingte fan it gegevensblok.
    As it fjild langer is dan maksimaal foar dizze gegevensbank tastien is, wurdt de lingte korrisjearre.

[ctx: STR_HELP_SCALE]
en: Specify the number of decimal places permitted in this field.
fy: Jou it tal desimalen op.

[ctx: STR_HELP_FORMAT_CODE]
en: This is where you see how the data would be displayed in the current format (use the button on the right to modify the format).
fy: Hjir kinne jo sjen hoe't de gegevens werjûn wurde yn it aktuele yndieling (Brûk de rjochter knop foar it oanpassen fan de yndieling).

[ctx: STR_HELP_FORMAT_BUTTON]
en: This is where you determine the output format of the data.
fy: Hjir is it wêr jo ynstelle kinne hoe't jo de gegevens yn de tabel yndiele wolle.

[ctx: STR_HELP_AUTOINCREMENT]
en: Choose if this field should contain AutoIncrement values.
    
    You can not enter data in fields of this type. An intrinsic value will be assigned to each new record automatically (resulting from the increment of the previous record).
fy: Jo kinne dit fjild in Automatyske fergrutsje wearde tawize.
    
    Yn dat gefal kinne jo hjiryn gjin gegevens ynfiere. Elk elk nei record kriget automatysk in eigen wearde tawiisd (Dy it resultaat is fan it ferheegjen fan de foarige).

[ctx: STR_TABLEDESIGN_DUPLICATE_NAME]
en: The table cannot be saved because column name "$column$" was assigned twice.
fy: De tabel kin net bewarre wurde omdat de kolomnamme "$column$" al bestiet.

[ctx: STR_TBL_COLUMN_IS_KEYCOLUMN]
en: The column "$column$" belongs to the primary key. If the column is deleted, the primary key will also be deleted. Do you really want to continue?
fy: De kolom "$column$" heart ta de primêre kaai. As de kolom wiske is, sil de primêre kaai ek wiske wurde. Wolle jo trochgean?

[ctx: STR_TBL_COLUMN_IS_KEYCOLUMN_TITLE]
en: Primary Key Affected
fy: Primêre kaai beynfloede

[ctx: STR_COLUMN_NAME]
en: Column
fy: Kolom

[ctx: STR_QRY_CONTINUE]
en: Continue anyway?
fy: Dochs trochgean?

[ctx: STR_TABLEDESIGN_CONNECTION_MISSING]
en: The table could not be saved due to problems connecting to the database.
fy: De tabel koe net bewarre wurde troch ferbiningen swierrigens mei de gegevensbank.

[ctx: STR_TABLEDESIGN_DATASOURCE_DELETED]
en: The table filter could not be adjusted because the data source has been deleted.
fy: De tabel filter koe net oanpast wurde omdat de gegevensboarne wiske is.

[ctx: STR_QUERY_SAVE_TABLE_EDIT_INDEXES]
en: Before you can edit the indexes of a table, you have to save it.
    Do you want to save the changes now?
fy: Foardat jo de yndeksen fan de tabel bewurkje kin, moatte jo it bewarje.
    Wolle jo de feroaringen no bewarje?

[ctx: STR_TABLEDESIGN_NO_PRIM_KEY_HEAD]
en: No primary key
fy: Gjin primêre kaai

[ctx: STR_TABLEDESIGN_NO_PRIM_KEY]
en: A unique index or primary key is required for data record identification in this database.
    You can only enter data into this table when one of these two structural conditions has been met.
    
    Should a primary key be created now?
fy: In unike yndeks of in primêre kaai is fereaske foar identifikaasje fan records.
    Jo kinne allinne gegevens ynfiere yn dizze tabel as ien fan dizze kritearia's foldien is.
    
    Wolle jo no in primêre kaai oanmeitsje?

[ctx: STR_TABLEDESIGN_ALTER_ERROR]
en: The column "$column$" could not be changed. Should the column instead be deleted and the new format appended?
fy: De kolom "$column$" koe net feroare wurde. Moat de kolom ynstee dêrfan wiske wurde en fan in nije yndieling fersjoen wurde?

[ctx: STR_TABLEDESIGN_SAVE_ERROR]
en: Error while saving the table design
fy: Flater ûnder it bewarje fan tabelûntwerp

[ctx: STR_TABLEDESIGN_COULD_NOT_DROP_COL]
en: The column $column$ could not be deleted.
fy: De kolom $column$ kin net wiske wurde.

[ctx: STR_AUTOINCREMENT_VALUE]
en: A~uto-increment statement
fy: Ynstruksjes a~utomatysk fergrutsje

[ctx: STR_HELP_AUTOINCREMENT_VALUE]
en: Enter an SQL statement for the auto-increment field.
    
    This statement will be directly transferred to the database when the table is created.
fy: Fier in SQL-ynstruksje yn foar it fjild foar automatysk fergrutsje.
    
    Dizze ynstruksje wurdt rjochtstreeks oerbrocht nei de gegevensbank wannear de tabel oanmakke wurdt.

[ctx: STR_NO_TYPE_INFO_AVAILABLE]
en: No type information could be retrieved from the database.
    The table design mode is not available for this data source.
fy: Der koe gjin type ynformaasje ophelle wurde út de gegevensbank.
    De tabelûntwerpmodus is net beskikber foar dizze gegevensboarne.

[ctx: STR_CHANGE_COLUMN_NAME]
en: change field name
fy: fjildnamme feroarje

[ctx: STR_CHANGE_COLUMN_TYPE]
en: change field type
fy: fjildtype feroarje

[ctx: STR_CHANGE_COLUMN_DESCRIPTION]
en: change field description
fy: fjildbeskriuwing feroarje

[ctx: STR_CHANGE_COLUMN_ATTRIBUTE]
en: change field attribute
fy: fjildattribút feroarje

[ctx: STR_ENTER_CONNECTION_PASSWORD]
en: A password is needed to connect to the data source "$name$".
fy: In wachtwurd is nedich om te ferbinen mei de gegevensboarne "$name$".

[ctx: STR_ASK_FOR_DIRECTORY_CREATION]
en: The directory
    
    $path$
    
    does not exist. Should it be created?
fy: De map
    
    $path$
    
    bestiet net. Wolle jo dizze oanmeitsje?

[ctx: STR_COULD_NOT_CREATE_DIRECTORY]
en: The directory $name$ could not be created.
fy: De map $name$ kin net oanmakke wurde.

[ctx: STR_ALREADYEXISTOVERWRITE]
en: The file already exists. Overwrite?
fy: De triem bestiet al. Oerskriuwe?

[ctx: STR_NEW_FOLDER]
en: Folder
fy: Map

[ctx: STR_DATABASE_TYPE_CHANGE]
en: Database properties
fy: Gegevensbank eigenskippen

[ctx: STR_PARENTTITLE_GENERAL]
en: Data Source Properties: #
fy: Eigenskippen gegevensboarne: #

[ctx: STR_ERR_USE_CONNECT_TO]
en: Please choose 'Connect to an existing database' to connect to an existing database instead.
fy: Kies 'Ferbine mei in besteande gegevensbank' om, yn plak derfan, te ferbinen mei in besteande gegevensbank.

[ctx: STR_COULD_NOT_LOAD_ODBC_LIB]
en: Could not load the program library #lib# or it is corrupted. The ODBC data source selection is not available.
fy: Koe it programmabiblioteek #lib# net lade of it is beskeadige. De funksje ODBC gegevensboarne seleksje is net beskikber.

[ctx: STR_UNSUPPORTED_DATASOURCE_TYPE]
en: This kind of data source is not supported on this platform.
    You are allowed to change the settings, but you probably will not be able to connect to the database.
fy: Dit type gegevensboarne wurdt op dit platfoarm net stipe.
    Jo kinne wol de ynstellingen feroarje, mar jo kinne wierskynlik net ferbine mei de gegevensboarne.

[ctx: STR_AUTOTEXT_FIELD_SEP_NONE]
en: {None}
fy: {Gjint}

[ctx: STR_AUTODELIMITER_MISSING]
en: #1 must be set.
fy: #1 moat ynsteld wurde.

[ctx: STR_AUTODELIMITER_MUST_DIFFER]
en: #1 and #2 must be different.
fy: #1 en #2 moatte ferskillend wêze.

[ctx: STR_AUTONO_WILDCARDS]
en: Wildcards such as ?,* are not allowed in #1.
fy: Jokertekens lykas ?,* binne yn #1 net tastien.

[ctx: STR_CONNECTION_TEST]
en: Connection Test
fy: Ferbiningstest

[ctx: STR_CONNECTION_SUCCESS]
en: The connection was established successfully.
fy: De ferbining is ta stân brocht.

[ctx: STR_CONNECTION_NO_SUCCESS]
en: The connection could not be established.
fy: De ferbining koe net ta stân brocht wurde.

[ctx: STR_JDBCDRIVER_SUCCESS]
en: The JDBC driver was loaded successfully.
fy: De JDBC stjoerprogramma is laden.

[ctx: STR_JDBCDRIVER_NO_SUCCESS]
en: The JDBC driver could not be loaded.
fy: De JDBC stjoerprogramma kin net laden wurde.

[ctx: STR_MSACCESS_FILTERNAME]
en: MS Access file
fy: MS Access triem

[ctx: STR_MSACCESS_2007_FILTERNAME]
en: MS Access 2007 file
fy: MS Access 2007 triem

[ctx: STR_FIREBIRD_FILTERNAME]
en: Firebird Database
fy: Firebird gegevensbank

[ctx: STR_RSC_CHARSETS]
en: System
fy: Systeem

[ctx: STR_ERROR_DURING_CREATION]
en: Error during creation
fy: Flater ûnder it meitsjen

[ctx: STR_UNEXPECTED_ERROR]
en: An unexpected error occurred. The operation could not be performed.
fy: Der barde in ûnferwachtse flater. De bewurking koe net útfierd wurde.

[ctx: STR_COULDNOTOPEN_LINKEDDOC]
en: The document "$file$" could not be opened.
fy: It dokumint "$file$" kin net iepene wurde.

[ctx: STR_MISSING_TABLES_XDROP]
en: The table cannot be deleted because the database connection does not support this.
fy: De tabel kin net wiske wurde omdat dizze net stipe wurdt troch de gegevensbank.

[ctx: STR_BUTTON_TEXT_ALL]
en: ~All
fy: ~Alle

[ctx: STR_UNDO_COLON]
en: Undo:
fy: Ungedien meitsje:

[ctx: STR_REDO_COLON]
en: Redo:
fy: Op 'e nij dwaan:

[ctx: STR_UNKNOWN_TYPE_FOUND]
en: No corresponding column type could be found for column '#1'.
fy: Gjin oerienkommende kolom type koe fûn wurde foar kolom '#1'.

[ctx: STR_FILE_DOES_NOT_EXIST]
en: The file "$file$" does not exist.
fy: De triem "$file$" bestiet net.

[ctx: STR_WARNINGS_DURING_CONNECT]
en: Warnings were encountered while connecting to the data source. Press "$buttontext$" to view them.
fy: Warskôgingen kamen net foaren by it ferbinen mei de gegevensboarne. Druk op "$buttontext$" om har te sjen.

[ctx: STR_NAMED_OBJECT_ALREADY_EXISTS]
en: The name '$#$' already exists.
    Please enter another name.
fy: De namme '$#$' bestiet al.
    Fier in oare namme yn.

[ctx: RID_STR_EXTENSION_NOT_PRESENT]
note: #i96130# use hard coded name
en: The report, "$file$", requires the Report Builder feature.
fy: It rapport, "$file$", fereasket de Report Builder funksje.

[ctx: STR_COULDNOTCREATE_DRIVERMANAGER]
en: Cannot connect to the SDBC driver manager (#servicename#).
fy: Kin de ferbining mei de SDBC stjoerprogramma behear (#servicename#) net ta stân bringe.

[ctx: STR_NOREGISTEREDDRIVER]
en: A driver is not registered for the URL #connurl#.
fy: Gjin stjoerprogramma foar URL-adres #connurl# registrearre.

[ctx: STR_NOTABLEINFO]
en: Successfully connected, but information about database tables is not available.
fy: Ferbining ta stân brocht, der binne allinne gjin gegevens oer tabellen yn de gegevensbank fûn.

[ctx: STR_ALL_TABLES]
en: All tables
fy: Alle tabellen

[ctx: STR_ALL_VIEWS]
en: All views
fy: Alle werjeften

[ctx: STR_ALL_TABLES_AND_VIEWS]
en: All tables and views
fy: Alle tabellen en werjeften

[ctx: STR_TABLE_PRIV_NAME]
en: Table name
fy: Tabelnamme

[ctx: STR_TABLE_PRIV_INSERT]
en: Insert data
fy: Gegevens ynfoegje

[ctx: STR_TABLE_PRIV_DELETE]
en: Delete data
fy: Gegevens wiskje

[ctx: STR_TABLE_PRIV_UPDATE]
en: Modify data
fy: Gegevens oanpasse

[ctx: STR_TABLE_PRIV_ALTER]
en: Alter structure
fy: Struktuer feroarje

[ctx: STR_TABLE_PRIV_SELECT]
en: Read data
fy: Gegevens lêze

[ctx: STR_TABLE_PRIV_REFERENCE]
en: Modify references
fy: Ferwizingen oanpasse

[ctx: STR_TABLE_PRIV_DROP]
en: Drop structure
fy: Struktuer wiskje

[ctx: STR_DBASE_PATH_OR_FILE]
en: Path to the dBASE files
fy: Paad nei de dBASE triemmen

[ctx: STR_FLAT_PATH_OR_FILE]
en: Path to the text files
fy: Paad nei de teksttriemmen

[ctx: STR_CALC_PATH_OR_FILE]
en: Path to the spreadsheet document
fy: Paad nei it rekkenblêd dokumint

[ctx: STR_NAME_OF_ODBC_DATASOURCE]
en: Name of the ODBC data source on your system
fy: Namme fan de ODBC gegevensboarne op jo systeem

[ctx: STR_WRITER_PATH_OR_FILE]
en: Path to the Writer document
fy: Paad nei it Writer dokumint

[ctx: STR_MYSQL_DATABASE_NAME]
en: Name of the MySQL database
fy: Namme fan de MySQL gegevens

[ctx: STR_ORACLE_DATABASE_NAME]
en: Name of the Oracle database
fy: Namme fan de Oracle gegevensbank

[ctx: STR_MSACCESS_MDB_FILE]
en: Microsoft Access database file
fy: Microsoft Access gegevens triem

[ctx: STR_NO_ADDITIONAL_SETTINGS]
en: No more settings are necessary. To verify that the connection is working, click the '%test' button.
fy: De ynstellingen binne folslein. Om nei te gean of de ferbining wurket, is in klik op de '%test' knop nedich.

[ctx: STR_COMMONURL]
en: Datasource URL (e.g. host=$host:$port dbname=$database)
fy: Gegevens boarne URL-adres (bgl. host=$host:$port dbname=$database)

[ctx: STR_HOSTNAME]
en: ~Host name
fy: ~Host namme

[ctx: STR_MOZILLA_PROFILE_NAME]
en: ~Mozilla profile name
fy: ~Mozilla profylnamme

[ctx: STR_THUNDERBIRD_PROFILE_NAME]
en: ~Thunderbird profile name
fy: ~Thunderbird profylnamme

[ctx: STR_ADD_TABLES]
en: Add Tables
fy: Tabellen taheakje

[ctx: STR_ADD_TABLE_OR_QUERY]
en: Add Table or Query
fy: Tabel of query taheakje

[ctx: STR_WIZ_COLUMN_SELECT_TITEL]
en: Apply columns
fy: Kolommen tapasse

[ctx: STR_WIZ_TYPE_SELECT_TITEL]
en: Type formatting
fy: Yndieling type

[ctx: STR_WIZ_NAME_ALREADY_DEFINED]
en: Enter a unique name for the new primary key data field.
    The following name is already in use:
fy: Fier in unike namme yn foar de nije primêre kaai gegevens fjild.
    De folgjende namme is al yn brûkme:

[ctx: STR_WIZ_NAME_MATCHING_TITEL]
en: Assign columns
fy: Kolommen tawize

[ctx: STR_WIZ_PB_PREV]
en: < ~Back
fy: < ~Foarige

[ctx: STR_WIZ_PB_NEXT]
en: ~Next>
fy: ~Folgjende>

[ctx: STR_WIZ_PB_OK]
en: C~reate
fy: ~Meitsje

[ctx: STR_WIZ_TABLE_COPY]
en: Copy table
fy: Tabel kopiearje

[ctx: STR_COPYTABLE_TITLE_COPY]
en: Copy table
fy: Tabel kopiearje

[ctx: STR_INVALID_TABLE_NAME]
en: This table name is not valid in the current database.
fy: Dit is gjin jildige tabelnamme yn de aktuele gegevensbank.

[ctx: STR_SUGGEST_APPEND_TABLE_DATA]
en: Choose the option 'Append data' on the first page to append data to an existing table.
fy: Kies de opsje 'Gegevens taheakje' op de earste side om gegevens oan in besteande tabel ta te heakjen.

[ctx: STR_INVALID_TABLE_NAME_LENGTH]
en: Please change the table name. It is too long.
fy: De tabelnamme is te lang. Kies in koartere.

[ctx: STR_DBWIZARDTITLE]
en: Database Wizard
fy: Assistint gegevensbank

[ctx: STR_PAGETITLE_INTROPAGE]
en: Select database
fy: Gegevens selektearje

[ctx: STR_PAGETITLE_DBASE]
en: Set up dBASE connection
fy: dBASE ferbining ynstelle

[ctx: STR_PAGETITLE_TEXT]
en: Set up a connection to text files
fy: In ferbining nei tekst triemmen ynstelle

[ctx: STR_PAGETITLE_MSACCESS]
en: Set up Microsoft Access connection
fy: Microsoft Access ferbining ynstelle

[ctx: STR_PAGETITLE_LDAP]
en: Set up LDAP connection
fy: LDAP ferbining ynstelle

[ctx: STR_PAGETITLE_ADO]
en: Set up ADO connection
fy: ADO ferbining ynstelle

[ctx: STR_PAGETITLE_JDBC]
en: Set up JDBC connection
fy: JDBC ferbining ynstelle

[ctx: STR_PAGETITLE_ORACLE]
en: Set up Oracle database connection
fy: Oracle gegevensbank ferbining ynstelle

[ctx: STR_PAGETITLE_MYSQL]
en: Set up MySQL connection
fy: MySQL ferbining ynstelle

[ctx: STR_PAGETITLE_ODBC]
en: Set up ODBC connection
fy: ODBC ferbining ynstelle

[ctx: STR_PAGETITLE_DOCUMENT_OR_SPREADSHEET]
en: Set up Writer Document or Spreadsheet connection
fy: Ynstelle fan in Writer dokumint of in rekkenblêd ferbining

[ctx: STR_PAGETITLE_AUTHENTIFICATION]
en: Set up user authentication
fy: Brûkers ferifikaasje ynstelle

[ctx: STR_PAGETITLE_MYSQL_NATIVE]
en: Set up MySQL server data
fy: MySQL tsjinner gegevens ynstelle

[ctx: STR_PAGETITLE_FINAL]
en: Save and proceed
fy: Bewarje en trochgean

[ctx: STR_DATABASEDEFAULTNAME]
en: New Database
fy: Nije gegevensbank

[ctx: STR_MYSQLJDBC_HEADERTEXT]
en: Set up connection to a MySQL database using JDBC
fy: Ferbining ynstelle nei in MySQL gegevensbank brûkende JDBC

[ctx: STR_MYSQLJDBC_HELPTEXT]
en: Please enter the required information to connect to a MySQL database using JDBC. Note that a JDBC driver class must be installed on your system and registered with %PRODUCTNAME.
    Please contact your system administrator if you are unsure about the following settings.
fy: Fier de fereaske ynformaasje yn om te ferbinen mei in MySQL gegevensbank brûkend JDBC. Tink derom dat in JDBC stjoerprogramma klasse ynstallearre moat wêze op jo systeem en registrearre yn %PRODUCTNAME.
    Nim kontakt op mei jo systeembehearder as jo twivelje oer de folgjende ynstellingen.

[ctx: STR_MYSQL_DRIVERCLASSTEXT]
en: MySQL JDBC d~river class:
fy: MySQL JDBC stjoe~rprogramma klasse:

[ctx: STR_MYSQL_DEFAULT]
en: Default: 3306
fy: Standert: 3306

[ctx: STR_DBASE_HEADERTEXT]
en: Set up a connection to dBASE files
fy: In ferbining ynstelle mei dBASE triemmen

[ctx: STR_DBASE_HELPTEXT]
en: Select the folder where the dBASE files are stored.
fy: De map selektearje wêr de dBASE triemmen bewarre binne.

[ctx: STR_TEXT_HEADERTEXT]
en: Set up a connection to text files
fy: In ferbining nei tekst triemmen ynstelle

[ctx: STR_TEXT_HELPTEXT]
en: Select the folder where the CSV (Comma Separated Values) text files are stored. %PRODUCTNAME Base will open these files in read-only mode.
fy: Selektearje de map wêr de CSV (Comma Separated Values) tekst triemmen bewarre binne. %PRODUCTNAME Base sil dizze triemmen iepenje yn allinne-lêzen modus.

[ctx: STR_TEXT_PATH_OR_FILE]
en: Path to text files
fy: Paad nei teksttriemmen

[ctx: STR_MSACCESS_HEADERTEXT]
en: Set up a connection to a Microsoft Access database
fy: In ferbining ynstelle nei in Microsoft Access gegevensbank

[ctx: STR_MSACCESS_HELPTEXT]
en: Please select the Microsoft Access file you want to access.
fy: Selektearje it Microsoft Access triem dat jo oproppe wolle.

[ctx: STR_ADO_HEADERTEXT]
en: Set up a connection to an ADO database
fy: In ferbining nei in ADO gegevensbank ynstelle

[ctx: STR_ADO_HELPTEXT]
en: Please enter the URL of the ADO data source you want to connect to.
    Click 'Browse' to configure provider-specific settings.
    Please contact your system administrator if you are unsure about the following settings.
fy: Fier it URL-adres yn fan de ADO gegevensboarne wêrmei jo ferbine wolle.
    Klik op 'Blêdzje' om de spesifike ferskaffer ynstellingen te konfigurearjen.
    Nim kontakt op mei jo systeembehearder as jo twivelje oer de folgjende ynstellingen.

[ctx: STR_ODBC_HEADERTEXT]
en: Set up a connection to an ODBC database
fy: In ferbining ynstelle nei in ODBC gegevensbank

[ctx: STR_ODBC_HELPTEXT]
en: Enter the name of the ODBC database you want to connect to.
    Click 'Browse...' to select an ODBC database that is already registered in %PRODUCTNAME.
    Please contact your system administrator if you are unsure about the following settings.
fy: Fier de namme yn fan de ODBC gegevensbank wêrmei jo ferbine wolle.
    Klik op 'Blêdzje' om in ODBC gegevensbank te selektearjen dat al registrearre is yn %PRODUCTNAME.
    Nim kontakt op mei jo systeembehearder as jo twivelje oer de folgjende ynstellingen.

[ctx: STR_JDBC_HEADERTEXT]
en: Set up a connection to a JDBC database
fy: In ferbining ynstelle nei in JDBC gegevensbank

[ctx: STR_JDBC_HELPTEXT]
en: Please enter the required information to connect to a JDBC database.
    Please contact your system administrator if you are unsure about the following settings.
fy: Fier de fereaske ynformaasje yn om te ferbinen nei in JDBC gegevensbank.
    Nim kontakt op mei jo systeembehearder as jo twivelje oer de folgjende ynstellingen.

[ctx: STR_ORACLE_HEADERTEXT]
en: Set up a connection to an Oracle database
fy: In ferbining ynstelle nei in Oracle gegevensbank

[ctx: STR_ORACLE_DEFAULT]
en: Default: 1521
fy: Standert: 1521

[ctx: STR_ORACLE_DRIVERCLASSTEXT]
en: Oracle JDBC ~driver class
fy: Oracle JDBC ~stjoerprogramma klasse

[ctx: STR_ORACLE_HELPTEXT]
en: Please enter the required information to connect to an Oracle database. Note that a JDBC Driver Class must be installed on your system and registered with %PRODUCTNAME.
    Please contact your system administrator if you are unsure about the following settings.
fy: Fier de fereaske ynformaasje yn om te ferbinen mei in Oracle gegevensbank. Tink derom dat in JDBC stjoerprogramma klasse ynstallearre moat wêze op jo systeem en registrearre yn %PRODUCTNAME.
    Nim kontakt op mei jo systeembehearder as jo twivelje oer de folgjende ynstellingen.

[ctx: STR_SPREADSHEET_HEADERTEXT]
en: Set up a connection to spreadsheets
fy: In ferbining ynstelle mei rekkenblêden

[ctx: STR_SPREADSHEET_HELPTEXT]
en: Click 'Browse...' to select a %PRODUCTNAME spreadsheet or Microsoft Excel workbook.
    %PRODUCTNAME will open this file in read-only mode.
fy: Klik op 'Blêdzje...' om in %PRODUCTNAME rekkenblêd fan Microsoft Excel wurkmap te selektearjen.
    %PRODUCTNAME sil dizze triem iepenje yn allinne-lêzen modus.

[ctx: STR_SPREADSHEETPATH]
en: ~Location and file name
fy: ~Lokaasje en triemnamme

[ctx: STR_COMMAND_EXECUTED_SUCCESSFULLY]
en: Command successfully executed.
fy: Opdracht is útfierd.

[ctx: STR_DIRECTSQL_CONNECTIONLOST]
en: The connection to the database has been lost. This dialog will be closed.
fy: De ferbining mei de gegevensbank is ferbrutsen. It dialoochskerm sil sluten wurde.

[ctx: STR_TAB_INDEX_SORTORDER]
en: Sort order
fy: Oarder fan sortearjen

[ctx: STR_TAB_INDEX_FIELD]
en: Index field
fy: Yndeksfjild

[ctx: STR_ORDER_ASCENDING]
en: Ascending
fy: Oprinnend

[ctx: STR_ORDER_DESCENDING]
en: Descending
fy: Ofrinnend

[ctx: STR_CONFIRM_DROP_INDEX]
en: Do you really want to delete the index '$name$'?
fy: Wolle jo de yndeks '$name$' wiskje?

[ctx: STR_LOGICAL_INDEX_NAME]
en: index
fy: yndeks

[ctx: STR_NEED_INDEX_FIELDS]
en: The index must contain at least one field.
fy: De yndeks moat yn elk gefal ien fjild befetsje.

[ctx: STR_INDEX_NAME_ALREADY_USED]
en: There is already another index named "$name$".
fy: Der is al in yndeks mei de namme "$name$".

[ctx: STR_INDEXDESIGN_DOUBLE_COLUMN_NAME]
en: In an index definition, no table column may occur more than once. However, you have entered column "$name$" twice.
fy: Yn in yndeks definysje mei elke tabelkolom mar ien kear foarkomme. Jo ha de kolom "$name$" twa kear brûkt.

[ctx: STR_COULD_NOT_CONVERT_PARAM]
en: The entry could not be converted to a valid value for the "$name$" parameter
fy: De ynfierde wearde koe net omsetten wurde nei in jildige wearde foar de parameter "$name$"

[ctx: STR_EXCEPTION_STATUS]
en: SQL Status
fy: SQL tastân

[ctx: STR_EXCEPTION_ERRORCODE]
en: Error code
fy: Flaterkoade

[ctx: STR_EXPLAN_STRINGCONVERSION_ERROR]
en: A frequent reason for this error is an inappropriate character set setting for the language of your database. Check the setting by choosing Edit - Database - Properties.
fy: In reden dy faaks foarkomt by dizze flater is in ferkearde ynstelling fan de tekenset foar de taal fan de gegevensbank. Kontrolearje jo ynstellingen yn it menu Bewurkje - Gegevensbank - Eigenskippen.

[ctx: STR_EXCEPTION_ERROR]
en: Error
fy: Flater

[ctx: STR_EXCEPTION_WARNING]
en: Warning
fy: Warskôging

[ctx: STR_EXCEPTION_INFO]
en: Information
fy: Ynformaasje

[ctx: STR_QUERY_USERADMIN_DELETE_USER]
en: Do you really want to delete the user?
fy: Wolle jo dizze brûker wiskje?

[ctx: STR_USERADMIN_NOT_AVAILABLE]
en: The database does not support user administration.
fy: De gegevensbank stipet gjin brûkers behear.

[ctx: STR_ERROR_PASSWORDS_NOT_IDENTICAL]
en: The passwords do not match. Please enter the password again.
fy: De wachtwurden komme net oerien. Fier it wachtwurd nochris yn.

[ctx: STR_JOIN_TYPE_HINT]
en: Please note that some databases may not support this join type.
fy: Tink derom dat guon gegevensbanken dit type join net stypje.

[ctx: STR_QUERY_INNER_JOIN]
en: Includes only records for which the contents of the related fields of both tables are identical.
fy: Befettet allinne records wêrby de ynhâld fan de keppele fjilden yn beide tabellen lyk is.

[ctx: STR_QUERY_LEFTRIGHT_JOIN]
en: Contains ALL records from table '%1' but only records from table '%2' where the values in the related fields are matching.
fy: Befettet ALLE record fan tabel '%1' en allinne de record fan tabel '%2' wêrby de ynhâld fan de keppele fjilden yn beide tabellen lyk is.

[ctx: STR_QUERY_FULL_JOIN]
en: Contains ALL records from '%1' and from '%2'.
fy: Befettet ALLE records út '%1' en '%2'.

[ctx: STR_QUERY_CROSS_JOIN]
en: Contains the Cartesian product of ALL records from '%1' and from '%2'.
fy: Befettet it kartesiaanske produkt fan ALLE records fan '%1' en fan '%2'.

[ctx: STR_CTW_NO_VIEWS_SUPPORT]
en: The destination database does not support views.
fy: It doel gegevensbank stipet gjin werjeften.

[ctx: STR_CTW_NO_PRIMARY_KEY_SUPPORT]
en: The destination database does not support primary keys.
fy: It doel gegevensbank stipet gjin primêre kaaien.

[ctx: STR_CTW_INVALID_DATA_ACCESS_DESCRIPTOR]
en: no data access descriptor found, or no data access descriptor able to provide all necessary information
fy: gjin gegevens tagong omskriuwing fûn, of gjin dy't yn steat is om alle nedige ynformaasje te ferskaffen

[ctx: STR_CTW_ONLY_TABLES_AND_QUERIES_SUPPORT]
en: Only tables and queries are supported at the moment.
fy: Op it stuit wurde allinne tabellen en query's stipe.

[ctx: STR_CTW_COPY_SOURCE_NEEDS_BOOKMARKS]
en: The copy source's result set must support bookmarks.
fy: De resultaat samling fan de kopyboarne moat blêdwizers stypje.

[ctx: STR_CTW_UNSUPPORTED_COLUMN_TYPE]
en: Unsupported source column type ($type$) at column position $pos$.
fy: Net stipe boarne kolomtype ($type$) op kolom posysje $pos$.

[ctx: STR_CTW_ILLEGAL_PARAMETER_COUNT]
en: Illegal number of initialization parameters.
fy: Yllegale tal fan inisjalisaasje parameters.

[ctx: STR_CTW_ERROR_DURING_INITIALIZATION]
en: An error occurred during initialization.
fy: Der is in flater bard by inisjalisaasje.

[ctx: STR_CTW_ERROR_UNSUPPORTED_SETTING]
en: Unsupported setting in the copy source descriptor: $name$.
fy: Net stipe ynstelling yn de kopy boarne beskriuwing: $name$.

[ctx: STR_CTW_ERROR_NO_QUERY]
en: To copy a query, your connection must be able to provide queries.
fy: Om in query te kopiearjen, moat jo ferbining de mooglikheid dêrfoar ferskaffen.

[ctx: STR_CTW_ERROR_INVALID_INTERACTIONHANDLER]
en: The given interaction handler is invalid.
fy: De opjûne ôfhanneling foar de ynteraksje is ûnjildich.

[ctx: STR_QUERY_REL_EDIT_RELATION]
en: This relation already exists. Do you want to edit it or create a new one?
fy: Dizze relaasje bestiet al. Wolle jo dizze bewurkje of in nijenien meitsje?

[ctx: STR_QUERY_REL_EDIT]
en: Edit...
fy: Bewurkje...

[ctx: STR_QUERY_REL_CREATE]
en: Create...
fy: Meitsje...

[ctx: STR_RELATIONDESIGN]
en:  - %PRODUCTNAME Base: Relation design
fy:  - %PRODUCTNAME Base: relaasje ûntwerp

[ctx: STR_RELATIONDESIGN_NOT_AVAILABLE]
en: The database does not support relations.
fy: De gegevensbank stipet gjin relaasjes.

[ctx: STR_QUERY_REL_DELETE_WINDOW]
en: When you delete this table all corresponding relations will be deleted as well. Continue?
fy: As jo dizze tabel wiskje, sille alle byhearrende relaasjes ek wiske wurde. trochgean?

[ctx: STR_QUERY_REL_COULD_NOT_CREATE]
en: The database could not create the relation. Maybe foreign keys for this kind of table aren't supported.
    Please check your documentation of the database.
fy: De gegevensbank koe de relaasje net oanmeitje. Mooglik wurde frjemde kaaien foar dizze tabel soart net stipe.
    Kontrolearje de dokumintaasje fan de gegevensbank.

[ctx: admindialog|AdminDialog]
en: Database Properties
fy: Gegevensbank eigenskippen

[ctx: admindialog|advanced]
en: Advanced Properties
fy: Avansearre eigenskippen

[ctx: advancedsettingsdialog|AdvancedSettingsDialog]
en: Advanced Settings
fy: Avansearre ynstellingen

[ctx: advancedsettingsdialog|generated]
en: Generated Values
fy: Oanmakke wearden

[ctx: advancedsettingsdialog|special]
en: Special Settings
fy: Spesjale ynstellingen

[ctx: applycolpage|label1]
en: Existing Columns
fy: Besteande kolommen

[ctx: authentificationpage|header]
en: Set up the user authentication
fy: Brûkers ferifikaasje ynstelle

[ctx: authentificationpage|helptext]
en: Some databases require you to enter a user name.
fy: Guon gegevensbanken fereaskje dat jo in brûkersnamme ynfiere.

[ctx: authentificationpage|generalUserNameLabel]
en: _User name
fy: Brû_kersnamme

[ctx: authentificationpage|passRequiredCheckbutton]
en: Password re_quired
fy: _Wachtwurd fereaske

[ctx: authentificationpage|testConnectionButton]
en: _Test Connection
fy: Ferbining _teste

[ctx: autocharsetpage|charsetlabel]
en: _Character set:
fy: _Tekenset:

[ctx: autocharsetpage|charsetheader]
en: Data Conversion
fy: Gegevens omsetting

[ctx: backuppage|label1]
en: Backup Your Document
fy: In reservekopy fan jo dokumint meitsje

[ctx: backuppage|label2]
en: To allow you to go back to the state before the migration, the database document will be backed up to a location of your choice. Every change done by the wizard will be made to the original document, the backup will stay untouched.
fy: Fan it gegevensbank dokumint sil in reservekopy makke wurde op de lokaasje fan jo kar, om jo yn steat te stellen om tebek te gean nei de situaasje fan foar de migraasje. Elke troch de assistint makke feroaring sil yn it orizjinele dokumint makke wurde, de reservekopy wurdt net oanrekke.

[ctx: backuppage|startmigrate]
en: Press 'Next' to save a copy of your document, and to begin the migration.
fy: Druk op 'folgjende' om in kopy te bewarjen fan it dokumint en mei migraasje útein te setten.

[ctx: backuppage|label3]
en: Save to:
fy: Bewarje yn:

[ctx: backuppage|browse]
en: Browse...
fy: Blêdzje...

[ctx: choosedatasourcedialog|ChooseDataSourceDialog]
en: Data Source
fy: Gegevensboarne

[ctx: choosedatasourcedialog|organize]
en: Or_ganize...
fy: Be_heare...

[ctx: choosedatasourcedialog|label1]
en: Choose a data source:
fy: Kies in gegevensboarne:

[ctx: collectionviewdialog|CollectionView]
en: Save
fy: Bewarje

[ctx: collectionviewdialog|ok]
en: _Save
fy: _Bewarje

[ctx: collectionviewdialog|newFolderButton|tooltip_text]
en: Create New Directory
fy: Nije map meitsje

[ctx: collectionviewdialog|upButton|tooltip_text]
en: Up One Level
fy: Ien nivo heger

[ctx: collectionviewdialog|fileNameLabel]
en: File _name:
fy: Triem_namme:

[ctx: colwidthdialog|ColWidthDialog]
en: Column Width
fy: Kolom breedte

[ctx: colwidthdialog|label1]
en: _Width:
fy: _Breedte:

[ctx: colwidthdialog|automatic]
en: _Automatic
fy: _Automatysk

[ctx: connectionpage|browseurllabel]
en: Path to the dBASE files:
fy: Paad nei de dBASE triemmen:

[ctx: connectionpage|create]
en: _Create New
fy: _Nije oanmeitsje

[ctx: connectionpage|browse]
en: _Browse…
fy: _Blêdzje…

[ctx: connectionpage|generalLabel]
en: General
fy: Algemien

[ctx: connectionpage|userNameLabel]
en: _User name:
fy: Brû_kersnamme:

[ctx: connectionpage|passCheckbutton]
en: Password required
fy: Wachtwurd fereaske

[ctx: connectionpage|userlabel]
en: User Authentication
fy: Brûkers ferifikaasje

[ctx: connectionpage|javaDriverLabel]
en: _JDBC driver class:
fy: _JDBC stjoerprogramma klasse:

[ctx: connectionpage|driverButton]
en: Test Class
fy: Klasse teste

[ctx: connectionpage|JDBCLabel]
en: JDBC Properties
fy: JDBC eigenskippen

[ctx: connectionpage|connectionButton]
en: Test Connection
fy: Ferbining teste

[ctx: copytablepage|defdata]
en: De_finition and data
fy: De_finysje en gegevens

[ctx: copytablepage|def]
en: Def_inition
fy: Def_inysje

[ctx: copytablepage|view]
en: A_s table view
fy: A_s tabel werjefte

[ctx: copytablepage|data]
en: Append _data
fy: Gegevens _ynfoegje

[ctx: copytablepage|firstline]
en: Use first _line as column names
fy: Earste _rigel as kolomnammen brûke

[ctx: copytablepage|primarykey]
en: Crea_te new field as primary key
fy: In nij fjild oanmei_tje as primêre kaai

[ctx: copytablepage|keynamelabel]
en: Name:
fy: Namme:

[ctx: copytablepage|infoLabel]
en: Existing data fields can be set as primary key on the type formatting step (third page) of the wizard.
fy: Besteande gegevens fjilden kinne as primêre kaai set wurde op de type yndieling stap (tredde side) fan de assistint.

[ctx: copytablepage|label1]
en: Options
fy: Opsjes

[ctx: copytablepage|label2]
en: Ta_ble name:
fy: Ta_belnamme:

[ctx: dbaseindexdialog|DBaseIndexDialog]
en: Indexes
fy: Yndeksen

[ctx: dbaseindexdialog|label1]
en: _Table:
fy: _Tabel:

[ctx: dbaseindexdialog|label3]
en: T_able indexes
fy: T_abel yndeksen

[ctx: dbaseindexdialog|label4]
en: _Free indexes
fy: _Frije registers

[ctx: dbaseindexdialog|label2]
en: Assignment
fy: Tawizing

[ctx: dbasepage|charsetlabel]
en: _Character set:
fy: _Tekenset:

[ctx: dbasepage|charsetheader]
en: Data Conversion
fy: Gegevens omsetting

[ctx: dbasepage|showDelRowsCheckbutton]
en: Display deleted records as well
fy: Wiske records ek werjaan

[ctx: dbasepage|specMessageLabel]
en: Note: When deleted, and thus inactive, records are displayed, you will not be able to delete records from the data source.
fy: Tink derm: Wannear wiske en dus ynaktyf, wurde records werjûn, jo kinne gjin records wiskje fan út de gegevensboarne.

[ctx: dbasepage|label1]
en: Optional Settings
fy: Opsjonele ynstellingen

[ctx: dbasepage|indiciesButton]
en: Indexes...
fy: Yndeksen...

[ctx: dbwizconnectionpage|helptext]
en: label
fy: lebel

[ctx: dbwizconnectionpage|browseurllabel]
en: Path to the dBASE files:
fy: Paad nei de dBASE triemmen:

[ctx: dbwizconnectionpage|create]
en: _Create New
fy: _Nije oanmeitsje

[ctx: dbwizconnectionpage|browse]
en: _Browse…
fy: _Blêdzje…

[ctx: dbwizmysqlintropage|label2]
en: You can connect to a MySQL database using either ODBC or JDBC.
    Please contact your system administrator if you are unsure about the following settings.
fy: Jo kinne in ferbining nei in MySQL gegevensbank meitsje brûkende ODBC of JDBC.
    Nim kontakt op mei jo systeembehearder as jo twifelje oer de folgjende ynstellingen.

[ctx: dbwizmysqlintropage|odbc]
en: Connect using ODBC (Open Database Connectivity)
fy: Ferbine mei ODBC (Open Database Connectivity)

[ctx: dbwizmysqlintropage|jdbc]
en: Connect using JDBC (Java Database Connectivity)
fy: Ferbine mei JDBC (Java Database Connectivity)

[ctx: dbwizmysqlintropage|directly]
en: Connect directly
fy: Rjochtstreeks ferbine

[ctx: dbwizmysqlintropage|label1]
en: How do you want to connect to your MySQL database?
fy: Hoe wolle jo ferbine mei jo MySQL gegevensbank?

[ctx: dbwizmysqlintropage|header]
en: Set Up a Connection to a MySQL Database
fy: In ferbining opsette mei in MySQL gegevensbank

[ctx: dbwizmysqlnativepage|helptext]
en: Please enter the required information to connect to a MySQL database.
fy: Fier de fereaske ynformaasje yn om te ferbinen mei in MySQL gegevensbank.

[ctx: dbwizmysqlnativepage|header]
en: Set Up a Connection to a MySQL Database
fy: In ferbining opsette mei in MySQL gegevensbank

[ctx: dbwizspreadsheetpage|browse]
en: Browse
fy: Blêdzje

[ctx: dbwizspreadsheetpage|create]
en: Create New
fy: Nije oanmeitsje

[ctx: dbwizspreadsheetpage|passwordrequired]
en: _Password required
fy: _Wachtwurd fereaske

[ctx: dbwiztextpage|browse]
en: Browse
fy: Blêdzje

[ctx: dbwiztextpage|create]
en: Create New
fy: Nije oanmeitsje

[ctx: deleteallrowsdialog|DeleteAllRowsDialog]
en: You are trying to delete all the columns in the table. A table cannot exist without columns. Should the table be deleted from the database? If not, the table will remain unchanged.
fy: Jo besykje alle kolommen yn de tabel te wiskjen. In tabel kin net bestean sûnder kolommen. Wolle jo de tabel wiskje út de gegevensbank? Is dat net sa, de tabel wurdt net feroare.

[ctx: designsavemodifieddialog|DesignSaveModifiedDialog]
en: Do you want to save the changes?
fy: Wolle jo de feroaringen bewarje?

[ctx: designsavemodifieddialog|DesignSaveModifiedDialog]
en: The relation design has been changed.
fy: De relaasje ûntwerp is feroare.

[ctx: directsqldialog|DirectSQLDialog]
en: Execute SQL Statement
fy: SQL opdracht útfiere

[ctx: directsqldialog|sql_label]
en: _Command to execute:
fy: _Opdracht om út te fieren:

[ctx: directsqldialog|showoutput]
en: _Show output of "select" statements
fy: _Utkomst fan "seleksje" opdrachten sjen litte

[ctx: directsqldialog|execute]
en: _Execute
fy: _Utfiere

[ctx: directsqldialog|sqlhistory_label]
en: _Previous commands:
fy: _Foarige opdrachten:

[ctx: directsqldialog|label1]
en: SQL Command
fy: SQL opdracht

[ctx: directsqldialog|label2]
en: Status
fy: Tastân

[ctx: directsqldialog|label3]
en: Output
fy: Utkomst

[ctx: fielddialog|FieldDialog]
en: Field Format
fy: Fjild yndieling

[ctx: fielddialog|format]
en: Format
fy: Yndieling

[ctx: fielddialog|alignment]
en: Alignment
fy: Rjochting

[ctx: fielddialog|alttitle]
en: Table Format
fy: Tabel yndieling

[ctx: finalpagewizard|headerText]
en: Decide How to Proceed After Saving the Database
fy: Beslút hoe fjirder te gean nei it bewarjen fan de gegevensbank

[ctx: finalpagewizard|helpText]
en: Do you want the wizard to register the database in %PRODUCTNAME?
fy: Wolle jo dat de assistint de gegevensbank yn %PRODUCTNAME registrearret?

[ctx: finalpagewizard|yesregister]
en: _Yes, register the database for me
fy: _Jawis, de gegevensbank registrearje

[ctx: finalpagewizard|noregister]
en: N_o, do not register the database
fy: N_ee, de gegevensbank net registrearje

[ctx: finalpagewizard|additionalText]
en: After the database file has been saved, what do you want to do?
fy: Wat wolle jo dwaan nei dat de gegevensbank triem bewarre is?

[ctx: finalpagewizard|openediting]
en: Open the database for editing
fy: Iepenje de gegevensbank om te bewurkjen

[ctx: finalpagewizard|usewizard]
en: Create tables using the table wizard
fy: Meitsje tabellen mei help fan de tabelassistint

[ctx: finalpagewizard|finishText]
en: Click 'Finish' to save the database.
fy: Klik op 'Foltôgje' om de gegevensbank te bewarjen.

[ctx: generalpagedialog|datasourceTypePre]
en: Select the type of database to which you want to establish a connection.
fy: Selektearje it soart fan gegevensbank wêrmei jo in ferbining ta stân bringe wolle.

[ctx: generalpagedialog|datasourceTypeLabel]
en: Database _type:
fy: Gegevensbank _type:

[ctx: generalpagedialog|datasourceTypeHelp]
en: On the following pages, you can make detailed settings for the connection.
    
    The new settings you make will overwrite your existing settings.
fy: Op de folgjende siden , kinne jo detaillearre ynstellingen foar de ferbining meitsje.
    
    De nije ynstellingen sille de besteande ynstellingen oerskriuwe.

[ctx: generalpagewizard|headerText]
en: Welcome to the %PRODUCTNAME Database Wizard
fy: Wolkom by de %PRODUCTNAME gegevensbank assistint

[ctx: generalpagewizard|helpText]
en: Use the Database Wizard to create a new database, open an existing database file, or connect to a database stored on a server.
fy: Brûk de gegevensbank assistint om in nije gegevensbank te meitsjen, in besteande gegevensbank triem te iepenjen of om mei in gegevensbank op in tsjinner te ferbinen.

[ctx: generalpagewizard|sourceTypeHeader]
en: What do you want to do?
fy: Wat wolle jo dwaan?

[ctx: generalpagewizard|createDatabase]
en: Create a n_ew database
fy: In nij_e gegevensbank oanmeitsje

[ctx: generalpagewizard|embeddeddbLabel]
en: _Embedded database:
fy: _Ynbêde gegevensbank:

[ctx: generalpagewizard|openExistingDatabase]
en: Open an existing database _file
fy: In besteande gegevensbank _triem iepenje

[ctx: generalpagewizard|docListLabel]
en: _Recently used:
fy: _Koartlyn brûkt:

[ctx: generalpagewizard|openDatabase]
en: Open
fy: Iepenje

[ctx: generalpagewizard|connectDatabase]
en: Connect to an e_xisting database
fy: Mei in besteande gegevensbank _ferbine

[ctx: generalspecialjdbcdetailspage|label2]
en: _Host name:
fy: _Host namme:

[ctx: generalspecialjdbcdetailspage|label3]
en: _Port number:
fy: _Poartenûmer:

[ctx: generalspecialjdbcdetailspage|driverClassLabel]
en: MySQL JDBC d_river class:
fy: MySQL JDBC stjoe_rprogramma klasse:

[ctx: generalspecialjdbcdetailspage|testDriverClassButton]
en: Test Class
fy: Klasse teste

[ctx: generalspecialjdbcdetailspage|label1]
en: Connection Settings
fy: Ferbining ynstellingen

[ctx: generalspecialjdbcdetailspage|charsetlabel]
en: _Character set:
fy: _Tekenset:

[ctx: generalspecialjdbcdetailspage|charsetheader]
en: Data Conversion
fy: Gegevens omsetting

[ctx: generatedvaluespage|autoretrieve]
en: Re_trieve generated values
fy: Oanmakke wearden _ophelje

[ctx: generatedvaluespage|statementft]
en: _Auto-increment statement:
fy: Ynstruksjes a_utomatysk fergrutsje:

[ctx: generatedvaluespage|queryft]
en: _Query of generated values:
fy: _Query fan oanmakke wearden:

[ctx: generatedvaluespage|label1]
en: Settings
fy: Ynstellingen

[ctx: indexdesigndialog|IndexDesignDialog]
en: Indexes
fy: Yndeksen

[ctx: indexdesigndialog|ID_INDEX_NEW]
en: New Index
fy: Nije yndeks

[ctx: indexdesigndialog|ID_INDEX_DROP]
en: Delete Current Index
fy: Aktuele yndeks wiskje

[ctx: indexdesigndialog|ID_INDEX_RENAME]
en: Rename Current Index
fy: Namme aktuele yndeks omneame

[ctx: indexdesigndialog|ID_INDEX_SAVE]
en: Save Current Index
fy: Aktuele yndeks bewarje

[ctx: indexdesigndialog|ID_INDEX_RESET]
en: Reset Current Index
fy: Aktuele yndeks resette

[ctx: indexdesigndialog|DESC_LABEL]
en: Index identifier:
fy: Yndeks identifier:

[ctx: indexdesigndialog|UNIQUE]
en: _Unique
fy: _Unyk

[ctx: indexdesigndialog|FIELDS_LABEL]
en: Fields:
fy: Fjilden:

[ctx: indexdesigndialog|INDEX_DETAILS]
en: Index Details
fy: Yndeks details

[ctx: jdbcconnectionpage|header]
en: Set Up a Connection to a JDBC Database
fy: In ferbining mei in JDBC gegevensbank ynstelle

[ctx: jdbcconnectionpage|helptext]
en: Please enter the required information to connect to a JDBC database. Please contact your system administrator if you are unsure about the following settings.
fy: Fier de nedige ynformaasje yn foar it ferbinen mei in JDBC gegevensbank. Nim kontakt op mei jo systeembehearder as jo twivelje oer de folgjende ynstellingen.

[ctx: jdbcconnectionpage|browseurllabel]
en: Path to the dBASE files:
fy: Paad nei de dBASE triemmen:

[ctx: jdbcconnectionpage|create]
en: _Create New
fy: _Nije oanmeitsje

[ctx: jdbcconnectionpage|browse]
en: _Browse…
fy: _Blêdzje…

[ctx: jdbcconnectionpage|jdbcLabel]
en: JDBC d_river class:
fy: JDBC stjoe_rprogramma klasse:

[ctx: jdbcconnectionpage|jdbcButton]
en: _Test Class
fy: Klasse _teste

[ctx: joindialog|liststore1]
en: Inner join
fy: Binnenste join

[ctx: joindialog|liststore1]
en: Left join
fy: Lofter join

[ctx: joindialog|liststore1]
en: Right join
fy: Rjochter join

[ctx: joindialog|liststore1]
en: Full (outer) join
fy: Folslein (bûtenste) join

[ctx: joindialog|liststore1]
en: Cross join
fy: Krús join

[ctx: joindialog|JoinDialog]
en: Join Properties
fy: Join eigenskippen

[ctx: joindialog|label1]
en: Tables Involved
fy: Belutsen tabellen

[ctx: joindialog|label2]
en: Fields Involved
fy: Belutsen fjilden

[ctx: joindialog|natural]
en: Natural
fy: Natuerlik

[ctx: joindialog|label6]
en: Options
fy: Opsjes

[ctx: jointablemenu|delete]
en: _Delete
fy: _Wiskje

[ctx: joinviewmenu|delete]
en: _Delete
fy: _Wiskje

[ctx: joinviewmenu|edit]
en: Edit...
fy: Bewurkje...

[ctx: keymenu|primarykey]
en: Primary Key
fy: Primêre kaai

[ctx: ldapconnectionpage|header]
en: Set Up a Connection to an LDAP Directory
fy: In ferbining mei in LDAP map ynstelle

[ctx: ldapconnectionpage|helpLabel]
en: Please enter the required information to connect to an LDAP directory. Please contact your system administrator if you are unsure about the following settings.
fy: Fier de nedige ynformaasje yn foar it ferbinen mei in LDAP map. Nim kontakt op mei jo systeembehearder as jo twivelje oer de folgjende ynstellingen.

[ctx: ldapconnectionpage|hostNameLabel]
en: _Server:
fy: _Tsjinner:

[ctx: ldapconnectionpage|portNumLabel]
en: _Port number:
fy: _Poartenûmer:

[ctx: ldapconnectionpage|portNumDefLabel]
en: Default: 389
fy: Standert: 389

[ctx: ldapconnectionpage|baseDNLabel]
en: Base _DN:
fy: Basis _DN:

[ctx: ldapconnectionpage|useSSLCheckbutton]
en: Use _secure connection (SSL)
fy: Befeilige _ferbining (SSL) brûke

[ctx: ldappage|label1]
en: _Base DN:
fy: _Basis DN:

[ctx: ldappage|useSSLCheckbutton]
en: Use secure connection (SSL)
fy: Befeiligde ferbining (SSL) brûke

[ctx: ldappage|label2]
en: _Port number:
fy: _Poartenûmer:

[ctx: ldappage|label3]
en: Maximum number of _records:
fy: Maksimum tal _records:

[ctx: ldappage|charsetheader]
en: Connection Settings
fy: Ferbining ynstellingen

[ctx: migratepage|label1]
en: Migration Progress
fy: Migraasje fuortgong

[ctx: migratepage|count]
en: The database document contains $forms$ form(s) and $reports$ report(s), which are currently being processed:
fy: It gegevensbank dokumint befettet $forms$ formulier(en) en $reports$ rapport(en), dy op it stuit ferwurke wurde:

[ctx: migratepage|done]
en: All forms and reports have been successfully processed. Press 'Next' to show a detailed summary.
fy: Alle dokuminten binne mei sukses ferwurke. Druk op 'Folgjende' om in detailearre oersicht sjen te litten.

[ctx: migratepage|label4]
en: Overall progress:
fy: Folsleine fuortgong:

[ctx: migratepage|overall]
en: document $current$ of $overall$
fy: dokumint $current$ fan 'e $overall$

[ctx: migratepage|label6]
en: Current progress:
fy: Aktuele fuortgong:

[ctx: migratepage|label5]
en: Current object:
fy: Aktueel objekt:

[ctx: migrationwarndialog|MigrationWarnDialog]
en: Confirm Migration
fy: Migraasje befêstigje

[ctx: migrationwarndialog|MigrationWarnDialog]
en: The document contains embedded HSQL data, which is deprecated.
fy: It dokumint befettet ynsletten HSQL gegevens, dy ferâldere binne.

[ctx: migrationwarndialog|MigrationWarnDialog]
en: Would you like to migrate to Firebird now?
fy: Wolle jo no nei Firebird migrearje?

[ctx: migrationwarndialog|later]
en: _Later
fy: _Letter

[ctx: mysqlnativepage|connectionheader]
en: Connection Settings
fy: Ferbining ynstellingen

[ctx: mysqlnativepage|usernamelabel]
en: _User name:
fy: Brû_kersnamme:

[ctx: mysqlnativepage|passwordrequired]
en: Password required
fy: Wachtwurd fereaske

[ctx: mysqlnativepage|userheader]
en: User Authentication
fy: Brûkers ferifikaasje

[ctx: mysqlnativepage|charsetlabel]
en: _Character set:
fy: _Tekenset:

[ctx: mysqlnativepage|charsetheader]
en: Data Conversion
fy: Gegevens omsetting

[ctx: mysqlnativesettings|dbnamelabel]
en: _Database name:
fy: _Gegevensbanknamme:

[ctx: mysqlnativesettings|hostport]
en: Se_rver/port
fy: Tsji_nner/poarte

[ctx: mysqlnativesettings|serverlabel]
en: _Server:
fy: _Tsjinner:

[ctx: mysqlnativesettings|portlabel]
en: _Port:
fy: _Poarte:

[ctx: mysqlnativesettings|defaultport]
en: Default: 3306
fy: Standert: 3306

[ctx: mysqlnativesettings|namedpipelabel]
en: Named p_ipe:
fy: Beneamde p_iipline:

[ctx: namematchingpage|all]
en: _All
fy: _Alle

[ctx: namematchingpage|none]
en: Non_e
fy: Gji_nt

[ctx: namematchingpage|leftlabel]
en: Source table:
fy: Boarne tabel:

[ctx: namematchingpage|rightlabel]
en: Destination table:
fy: Doel tabel:

[ctx: odbcpage|charsetlabel]
en: _Character set:
fy: _Tekenset:

[ctx: odbcpage|charsetheader]
en: Data Conversion
fy: Gegevens omsetting

[ctx: odbcpage|optionslabel]
en: ODBC _options:
fy: ODBC _opsjes:

[ctx: odbcpage|useCatalogCheckbutton]
en: Use catalog for file-based databases
fy: Katalogus foar triem basearde gegevensbanken brûke

[ctx: odbcpage|label1]
en: Optional Settings
fy: Opsjonele ynstellingen

[ctx: parametersdialog|Parameters]
en: Parameter Input
fy: Parameter opjaan

[ctx: parametersdialog|label2]
en: _Value:
fy: _Wearde:

[ctx: parametersdialog|next]
en: _Next
fy: _Folgjende

[ctx: password|PasswordDialog]
en: Change Password
fy: Wachtwurd feroarje

[ctx: password|label2]
en: Old p_assword:
fy: Ald wachtwurd:

[ctx: password|label3]
en: _Password:
fy: _Wachtwurd:

[ctx: password|label4]
en: _Confirm password:
fy: _Wachtwurd befêstigje:

[ctx: password|label1]
en: User “$name$:  $”
fy: Brûker “$name$:  $”

[ctx: preparepage|label1]
en: Welcome to the Database Macro Migration Wizard
fy: Wolkom by de gegevensbank makro migraasje assistint

[ctx: preparepage|label2]
en: This wizard will guide you through the task of migrating your macros.
    
    After you finished it, all macros which were formerly embedded into the forms and reports of the current database document will have been moved to the document itself. In this course, libraries will be renamed as needed.
    
    If your forms and reports contain references to those macros, they will be adjusted, where possible.
    
    Before the migration can start, all forms, reports, queries and tables belonging to the document must be closed. Press 'Next' to do so.
fy: Dizze assistint sil jo troch it migrearjen fan jo makro's.
    
    Alle makro's dy't jo earst yn jo formulieren en rapporten ynbêde wienen, sille nei it gegevensbank dokumint ferpleatst wêze as jo it foltôge ha. By dizze ferwurking sille biblioteken omneamd wurde as dat nedich is.
    
    As jo formulieren ferwizingen nei dizze makro's befetsje, dan sille dizzen wêr mooglik oanpast wurde.
    
    Foardat de migraasje úteinsette kin moatte alle formulieren, rapporten, query's en tabellen sluten wurde. Druk op 'Folgjende' om dat te dwaan.

[ctx: preparepage|closedocerror]
en: Not all objects could be closed. Please close them manually, and re-start the wizard.
fy: Net alle objekten koenen sluten wurde. Slut se sels en werstart de assistint.

[ctx: querycolmenu|width]
en: Column _Width...
fy: Kolom _breedte...

[ctx: querycolmenu|delete]
en: _Delete
fy: _Wiskje

[ctx: queryfilterdialog|QueryFilterDialog]
en: Standard Filter
fy: Standert filter

[ctx: queryfilterdialog|label5]
en: Field name
fy: Fjildnamme

[ctx: queryfilterdialog|label6]
en: Condition
fy: Betingsten

[ctx: queryfilterdialog|field1]
en: - none -
fy: - gjint -

[ctx: queryfilterdialog|cond1]
en: like
fy: lyk oan

[ctx: queryfilterdialog|cond1]
en: not like
fy: net lyk oan

[ctx: queryfilterdialog|cond1]
en: null
fy: leech

[ctx: queryfilterdialog|cond1]
en: not null
fy: net leech

[ctx: queryfilterdialog|field2]
en: - none -
fy: - gjint -

[ctx: queryfilterdialog|field3]
en: - none -
fy: - gjint -

[ctx: queryfilterdialog|label7]
en: Value
fy: Wearde

[ctx: queryfilterdialog|op2]
en: AND
fy: EN

[ctx: queryfilterdialog|op2]
en: OR
fy: OF

[ctx: queryfilterdialog|op3]
en: AND
fy: EN

[ctx: queryfilterdialog|op3]
en: OR
fy: OF

[ctx: queryfilterdialog|label1]
en: Criteria
fy: Kritearia

[ctx: queryfuncmenu|functions]
en: Functions
fy: Funksjes

[ctx: queryfuncmenu|tablename]
en: Table Name
fy: Tabelnamme

[ctx: queryfuncmenu|distinct]
en: Distinct Values
fy: Dúdlike wearden

[ctx: querypropertiesdialog|QueryPropertiesDialog]
en: Query Properties
fy: Query eigenskippen

[ctx: querypropertiesdialog|limit-label]
en: Limit:
fy: Limyt:

[ctx: querypropertiesdialog|distinct]
en: Yes
fy: Ja

[ctx: querypropertiesdialog|nondistinct]
en: No
fy: Nee

[ctx: querypropertiesdialog|distinctvalues]
en: Distinct values:
fy: Underskiedende wearden:

[ctx: relationdialog|RelationDialog]
en: Relations
fy: Relaasjes

[ctx: relationdialog|label1]
en: Tables Involved
fy: Belutsen tabellen

[ctx: relationdialog|label2]
en: Fields Involved
fy: Belutsen fjilden

[ctx: relationdialog|addaction]
en: _No action
fy: _Gjin aksje

[ctx: relationdialog|addcascade]
en: _Update cascade
fy: _Geandewei fernije

[ctx: relationdialog|adddefault]
en: Set _default
fy: Op _standert sette

[ctx: relationdialog|label3]
en: Update Options
fy: Opsjes foar it fernijen

[ctx: relationdialog|delaction]
en: _No action
fy: _Gjin aksje

[ctx: relationdialog|delcascade]
en: Delete _cascade
fy: _Geandewei wiskje

[ctx: relationdialog|deldefault]
en: Set _default
fy: Op _standert sette

[ctx: relationdialog|label4]
en: Delete Options
fy: Opsjes foar it wiskjen

[ctx: relationdialog|liststore1]
en: Inner join
fy: Binnenste join

[ctx: relationdialog|liststore1]
en: Left join
fy: Lofter join

[ctx: relationdialog|liststore1]
en: Right join
fy: Rjochter join

[ctx: relationdialog|liststore1]
en: Full (outer) join
fy: Folslein (bûtenste) join

[ctx: relationdialog|liststore1]
en: Cross join
fy: Krús join

[ctx: rowheightdialog|RowHeightDialog]
en: Row Height
fy: Rige hichte

[ctx: rowheightdialog|label1]
en: _Height:
fy: _Hichte:

[ctx: rowheightdialog|automatic]
en: _Automatic
fy: _Automatysk

[ctx: rtfcopytabledialog|RTFCopyTable]
en: Copy RTF Table
fy: RTF tabel kopiearje

[ctx: savedialog|SaveDialog]
en: Save As
fy: Bewarje as

[ctx: savedialog|descriptionft]
en: Please enter a name for the object to be created:
fy: Fier in namme yn foar it objekt dat jo meitsje wolle:

[ctx: savedialog|catalogft]
en: _Catalog:
fy: _Katalogus:

[ctx: savedialog|schemaft]
en: _Schema:
fy: _Skema:

[ctx: saveindexdialog|SaveIndexDialog]
en: Exit Index Design
fy: It yndeks ûntwerp ferlitte

[ctx: saveindexdialog|SaveIndexDialog]
en: Do you want to save the changes made to the current index?
fy: Wolle jo de feroaringen dy makke yn de aktuele yndeks bewarje?

[ctx: savemodifieddialog|SaveModifiedDialog]
en: Do you want to save the changes?
fy: Wolle jo de feroaringen bewarje?

[ctx: savemodifieddialog|SaveModifiedDialog]
en: The current record has been changed.
fy: It aktuele record is feroare.

[ctx: sortdialog|SortDialog]
en: Sort Order
fy: Oarder fan sortearjen

[ctx: sortdialog|label3]
en: and then
fy: en dan

[ctx: sortdialog|label4]
en: and then
fy: en dan

[ctx: sortdialog|label5]
en: Field name
fy: Fjildnamme

[ctx: sortdialog|label6]
en: Order
fy: Oarder

[ctx: sortdialog|value1]
en: ascending
fy: oprinnend

[ctx: sortdialog|value1]
en: descending
fy: ôfrinnend

[ctx: sortdialog|value2]
en: ascending
fy: oprinnend

[ctx: sortdialog|value2]
en: descending
fy: ôfrinnend

[ctx: sortdialog|value3]
en: ascending
fy: oprinnend

[ctx: sortdialog|value3]
en: descending
fy: ôfrinnend

[ctx: sortdialog|label1]
en: Sort Order
fy: Oarder fan sortearjen

[ctx: specialjdbcconnectionpage|header]
en: Set up connection to a MySQL database using JDBC
fy: Ferbining ynstelle nei in MySQL gegevensbank brûkende JDBC

[ctx: specialjdbcconnectionpage|helpLabel]
en: Please enter the required information to connect to a MySQL database using JDBC. Note that a JDBC driver class must be installed on your system and registered with %PRODUCTNAME. Please contact your system administrator if you are unsure about the following settings.
fy: Fier de fereaske ynformaasje yn om te ferbinen mei in MySQL gegevensbank brûkende JDBC. Tink derom dat in JDBC stjoerprogramma klasse ynstallearre moat wêze op jo systeem en registrearre yn %PRODUCTNAME. Nim kontakt op mei jo systeembehearder as jo twifelje oer de folgjende ynstellingen.

[ctx: specialjdbcconnectionpage|dbNameLabel]
en: _Database name:
fy: _Gegevensbanknamme:

[ctx: specialjdbcconnectionpage|hostNameLabel]
en: _Server:
fy: _Tsjinner:

[ctx: specialjdbcconnectionpage|portNumLabel]
en: _Port number:
fy: _Poartenûmer:

[ctx: specialjdbcconnectionpage|portNumDefLabel]
en: Default: 3306
fy: Standert: 3306

[ctx: specialjdbcconnectionpage|jdbcDriverLabel]
en: MySQL JDBC d_river class:
fy: MySQL JDBC stjoe_rprogramma klasse:

[ctx: specialjdbcconnectionpage|testDriverButton]
en: _Test Class
fy: Klasse _teste

[ctx: specialsettingspage|usesql92]
en: Use SQL92 naming constraints
fy: SQL92 nammejouwing beheining brûke

[ctx: specialsettingspage|append]
en: Append the table alias name on SELECT statements
fy: De skûlnamme fan de tabel taheakje oan SELECT ynstruksjes

[ctx: specialsettingspage|useas]
en: Use keyword AS before table alias names
fy: It stekwurd AS foar skûlnammen en tabellen brûke

[ctx: specialsettingspage|useoj]
en: Use Outer Join syntax '{oj }'
fy: Bûtenste join syntaksis '{oj }' brûke

[ctx: specialsettingspage|ignoreprivs]
en: Ignore the privileges from the database driver
fy: De privileezjes fanút it gegevensbank stjoerprogramma negearje

[ctx: specialsettingspage|replaceparams]
en: Replace named parameters with '?'
fy: Beneamde parameters ferfange troch '?'

[ctx: specialsettingspage|displayver]
en: Display version columns (when available)
fy: Ferzje kolommen sjen litte (as beskikber)

[ctx: specialsettingspage|usecatalogname]
en: Use catalog name in SELECT statements
fy: Katalogusnamme yn SELECT ynstruksjes brûke

[ctx: specialsettingspage|useschemaname]
en: Use schema name in SELECT statements
fy: Skemanamme yn SELECT ynstruksjes brûke

[ctx: specialsettingspage|createindex]
en: Create index with ASC or DESC statement
fy: Yndeks meitsje mei ASC of DESC ynstruksje

[ctx: specialsettingspage|eol]
en: End text lines with CR+LF
fy: Tekstrigels ôfslute mei CR+LF

[ctx: specialsettingspage|ignorecurrency]
en: Ignore currency field information
fy: Faluta fjild ynformaasje negearje

[ctx: specialsettingspage|inputchecks]
en: Form data input checks for required fields
fy: Kontrôle fan ynfierde formuliergegevens foar fereaske fjilden

[ctx: specialsettingspage|useodbcliterals]
en: Use ODBC conformant date/time literals
fy: Letterlike datum/tiid neffens de ODBC brûke

[ctx: specialsettingspage|primarykeys]
en: Supports primary keys
fy: Stipet primêre kaaien

[ctx: specialsettingspage|resulttype]
en: Respect the result set type from the database driver
fy: It set type fan it gegevensbank stjoerprogramma akseptearje

[ctx: specialsettingspage|comparisonft]
en: Comparison of Boolean values:
fy: Ferliking fan booleaanske wearden:

[ctx: specialsettingspage|comparison]
en: Default
fy: Standert

[ctx: specialsettingspage|comparison]
en: Mixed
fy: Mingd

[ctx: specialsettingspage|rowsft]
en: Rows to scan column types:
fy: Rigen om nei kolomtypen te sykjen:

[ctx: sqlexception|SQLExceptionDialog]
en: Error Details
fy: Flater details

[ctx: sqlexception|label2]
en: Error _list:
fy: List mei _flaters:

[ctx: sqlexception|label3]
en: _Description:
fy: _Beskriuwing:

[ctx: summarypage|label1]
en: Summary
fy: Oersicht

[ctx: summarypage|success]
en: The migration was successful. Below is a log of the actions which have been taken to your document.
fy: De migraasje wie mei sukses útfierd. Hjirûnder is in loch mei de aksjes hokker op it dokumint ûndernommen binne.

[ctx: summarypage|failure]
en: The migration was not successful. Examine the migration log below for details.
fy: De migraasje wie net mei sukses útfierd. Besjoch it migraasje loch hjirûnder foar de details.

[ctx: tabledesignrowmenu|cut]
en: Cu_t
fy: Kn_ippe

[ctx: tabledesignrowmenu|copy]
en: _Copy
fy: _Kopiearje

[ctx: tabledesignrowmenu|paste]
en: _Paste
fy: _Plakke

[ctx: tabledesignrowmenu|delete]
en: _Delete
fy: _Wiskje

[ctx: tabledesignrowmenu|insert]
en: Insert Rows
fy: Rigen ynfoegje

[ctx: tabledesignrowmenu|primarykey]
en: Primary Key
fy: Primêre kaai

[ctx: tabledesignsavemodifieddialog|TableDesignSaveModifiedDialog]
en: Do you want to save the changes?
fy: Wolle jo de feroaringen bewarje?

[ctx: tabledesignsavemodifieddialog|TableDesignSaveModifiedDialog]
en: The table has been changed.
fy: Dizze tabel is feroare.

[ctx: tablesfilterdialog|TablesFilterDialog]
en: Tables Filter
fy: Tabel filters

[ctx: tablesfilterpage|label2]
en: Mark the tables that should be visible for the applications.
fy: De tabellen markearje dy sichtber wêze moatte foar de programma's.

[ctx: tablesfilterpage|label1]
en: Tables and Table Filter
fy: Tabellen en tabel filter

[ctx: tablesjoindialog|tables]
en: Tables
fy: Tabellen

[ctx: tablesjoindialog|queries]
en: Queries
fy: Query's

[ctx: tablesjoindialog|title]
en: Add Tables
fy: Tabellen taheakje

[ctx: tablesjoindialog|alttitle]
en: Add Table or Query
fy: Tabel of query taheakje

[ctx: textconnectionsettings|TextConnectionSettingsDialog]
en: Text Connection Settings
fy: Tekst ferbiningen ynstellingen

[ctx: textpage|textfile]
en: Plain text files (*.txt)
fy: Ienfâldige teksttriemmen (*.txt)

[ctx: textpage|csvfile]
en: Comma-separated value files (*.csv)
fy: Komma skieden wearde triemmen (*.csv)

[ctx: textpage|custom]
en: Custom:
fy: Oanpast:

[ctx: textpage|example]
en: Custom: *.abc
fy: Oanpast: *.abc

[ctx: textpage|extensionheader]
en: Specify the Type of Files You Want to Access
fy: De type fan triemmen oantsjutte dy't jo iepenje wolle

[ctx: textpage|containsheaders]
en: _Text contains headers
fy: _Tekst befettet kopteksten

[ctx: textpage|fieldlabel]
en: Field separator:
fy: Fjild skiedingsteken:

[ctx: textpage|textlabel]
en: Text separator:
fy: Tekst skiedingsteken:

[ctx: textpage|decimallabel]
en: Decimal separator:
fy: Desimaal skiedingsteken:

[ctx: textpage|thousandslabel]
en: Thousands separator:
fy: Skiedingsteken foar tûzenen:

[ctx: textpage|formatlabel]
en: Row Format
fy: Rige yndieling

[ctx: textpage|charsetlabel]
en: _Character set:
fy: _Tekenset:

[ctx: textpage|charsetheader]
en: Data Conversion
fy: Gegevens omsetting

[ctx: typeselectpage|columns]
en: Column Information
fy: Kolom gegevens

[ctx: typeselectpage|autolabel]
en: Lines (ma_x.):
fy: Rigels (ma_ks):

[ctx: typeselectpage|autobutton]
en: _Auto
fy: _Automatysk

[ctx: typeselectpage|autotype]
en: Automatic Type Recognition
fy: Automatyske type werkenning

[ctx: useradmindialog|UserAdminDialog]
en: User Administration
fy: Brûkers behear

[ctx: useradmindialog|settings]
en: User Settings
fy: Brûker ynstellingen

[ctx: useradminpage|label3]
en: Us_er:
fy: Brûk_er:

[ctx: useradminpage|add]
en: _Add User...
fy: Brûker _taheakje...

[ctx: useradminpage|changepass]
en: Change _Password...
fy: Wachtwurd _feroarje...

[ctx: useradminpage|delete]
en: _Delete User...
fy: _Brûker wiskje...

[ctx: useradminpage|label1]
en: User Selection
fy: Brûker seleksje

[ctx: useradminpage|label2]
en: Access Rights for Selected User
fy: Tagongsrjochten foar selektearre brûker

[ctx: userdetailspage|hostnameft]
en: _Host name:
fy: _Host namme:

[ctx: userdetailspage|portnumberft]
en: _Port number:
fy: _Poartenûmer:

[ctx: userdetailspage|usecatalog]
en: _Use catalog
fy: Katalog_us brûke

[ctx: userdetailspage|optionslabel]
en: _Driver settings:
fy: _Stjoerprogramma ynstellingen:

[ctx: userdetailspage|label1]
en: Connection Settings
fy: Ferbining ynstellingen

[ctx: userdetailspage|charsetlabel]
en: _Character set:
fy: _Tekenset:

[ctx: userdetailspage|charsetheader]
en: Data conversion
fy: Gegevens omsetting
