/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include <shlobj.h>
#include <shlwapi.h>
#include <wtsapi32.h>
#include <userenv.h>
#include <shellapi.h>
#include <cstddef>

#pragma comment(lib, "wtsapi32.lib")
#pragma comment(lib, "userenv.lib")
#pragma comment(lib, "shlwapi.lib")
#pragma comment(lib, "ole32.lib")
#pragma comment(lib, "rpcrt4.lib")

#include "workmonitor.hxx"
#include "serviceinstall.hxx"
#include "servicebase.hxx"
#include "registrycertificates.hxx"
#include "uachelper.h"
#include "updatehelper.h"
#include "errors.h"
#include "windowsHelper.hxx"

// Wait 15 minutes for an update operation to run at most.
// Updates usually take less than a minute so this seems like a
// significantly large and safe amount of time to wait.
static const int TIME_TO_WAIT_ON_UPDATER = 15 * 60 * 1000;
wchar_t* MakeCommandLine(int argc, wchar_t **argv);
BOOL WriteStatusFailure(LPCWSTR updateDirPath, int errorCode);
BOOL PathGetSiblingFilePath(LPWSTR destinationBuffer,  LPCWSTR siblingFilePath,
                            LPCWSTR newFileName);

/*
 * Read the update.status file and sets isApplying to true if
 * the status is set to applying.
 *
 * @param  updateDirPath The directory where update.status is stored
 * @param  isApplying Out parameter for specifying if the status
 *         is set to applying or not.
 * @return TRUE if the information was filled.
*/
static BOOL
IsStatusApplying(LPCWSTR updateDirPath, BOOL &isApplying)
{
    isApplying = FALSE;
    WCHAR updateStatusFilePath[MAX_PATH + 1] = {L'\0'};
    wcsncpy(updateStatusFilePath, updateDirPath, MAX_PATH);
    if (!PathAppendSafe(updateStatusFilePath, L"update.status"))
    {
        LOG_WARN(("Could not append path for update.status file"));
        return FALSE;
    }

    AutoHandle statusFile(CreateFileW(updateStatusFilePath, GENERIC_READ,
                                      FILE_SHARE_READ |
                                      FILE_SHARE_WRITE |
                                      FILE_SHARE_DELETE,
                                      nullptr, OPEN_EXISTING, 0, nullptr));

    if (statusFile == INVALID_HANDLE_VALUE)
    {
        LOG_WARN(("Could not open update.status file"));
        return FALSE;
    }

    char buf[32] = { 0 };
    DWORD read;
    if (!ReadFile(statusFile.get(), buf, sizeof(buf), &read, nullptr))
    {
        LOG_WARN(("Could not read from update.status file"));
        return FALSE;
    }

    LOG(("updater.exe returned status: %s", buf));

    const char kApplying[] = "applying";
    isApplying = strncmp(buf, kApplying,
                         sizeof(kApplying) - 1) == 0;
    return TRUE;
}

/**
 * Determines whether we're staging an update.
 *
 * @param  argc    The argc value normally sent to updater.exe
 * @param  argv    The argv value normally sent to updater.exe
 * @return boolean True if we're staging an update
 */
static bool
IsUpdateBeingStaged(int argc, LPWSTR *argv)
{
    // PID will be set to -1 if we're supposed to stage an update.
    return argc == 4 && !wcscmp(argv[3], L"-1") ||
           argc == 5 && !wcscmp(argv[4], L"-1");
}

/**
 * Determines whether the param only contains digits.
 *
 * @param str     The string to check
 * @param boolean True if the param only contains digits
 */
static bool
IsDigits(WCHAR *str)
{
    while (*str)
    {
        if (!iswdigit(*str++))
        {
            return FALSE;
        }
    }
    return TRUE;
}

/**
 * Determines whether the command line contains just the directory to apply the
 * update to (old command line) or if it contains the installation directory and
 * the directory to apply the update to.
 *
 * @param argc    The argc value normally sent to updater.exe
 * @param argv    The argv value normally sent to updater.exe
 * @param boolean True if the command line contains just the directory to apply
 *                the update to
 */
static bool
IsOldCommandline(int argc, LPWSTR *argv)
{
    return argc == 4 && !wcscmp(argv[3], L"-1") ||
           argc >= 4 && (wcsstr(argv[3], L"/replace") || IsDigits(argv[3]));
}

/**
 * Gets the installation directory from the arguments passed to updater.exe.
 *
 * @param argcTmp    The argc value normally sent to updater.exe
 * @param argvTmp    The argv value normally sent to updater.exe
 * @param aResultDir Buffer to hold the installation directory.
 */
static BOOL
GetInstallationDir(int argcTmp, LPWSTR *argvTmp, WCHAR aResultDir[MAX_PATH + 1])
{
    int index = 3;
    if (IsOldCommandline(argcTmp, argvTmp))
    {
        index = 2;
    }

    if (argcTmp < index)
    {
        return FALSE;
    }

    wcsncpy(aResultDir, argvTmp[2], MAX_PATH);
    WCHAR* backSlash = wcsrchr(aResultDir, L'\\');
    // Make sure that the path does not include trailing backslashes
    if (backSlash && (backSlash[1] == L'\0'))
    {
        *backSlash = L'\0';
    }

    // The new command line's argv[2] is always the installation directory.
    if (index == 2)
    {
        bool backgroundUpdate = IsUpdateBeingStaged(argcTmp, argvTmp);
        bool replaceRequest = (argcTmp >= 4 && wcsstr(argvTmp[3], L"/replace"));
        if (backgroundUpdate || replaceRequest)
        {
            return PathRemoveFileSpecW(aResultDir);
        }
    }
    return TRUE;
}

/**
 * Runs an update process as the service using the SYSTEM account.
 *
 * @param  argc           The number of arguments in argv
 * @param  argv           The arguments normally passed to updater.exe
 *                        argv[0] must be the path to updater.exe
 * @param  processStarted Set to TRUE if the process was started.
 * @return TRUE if the update process was run had a return code of 0.
 */
BOOL
StartUpdateProcess(int argc,
                   LPWSTR *argv,
                   LPCWSTR installDir,
                   BOOL &processStarted)
{
    LOG(("Starting update process as the service in session 0."));
    STARTUPINFO si = {0};
    si.cb = sizeof(STARTUPINFO);
    si.lpDesktop = L"winsta0\\Default";
    PROCESS_INFORMATION pi = {0};

    // The updater command line is of the form:
    // updater.exe update-dir apply [wait-pid [callback-dir callback-path args]]
    LPWSTR cmdLine = MakeCommandLine(argc, argv);

    int index = 3;
    if (IsOldCommandline(argc, argv))
    {
        index = 2;
    }

    // If we're about to start the update process from session 0,
    // then we should not show a GUI.  This only really needs to be done
    // on Vista and higher, but it's better to keep everything consistent
    // across all OS if it's of no harm.
    if (argc >= index)
    {
        // Setting the desktop to blank will ensure no GUI is displayed
        si.lpDesktop = L"";
        si.dwFlags |= STARTF_USESHOWWINDOW;
        si.wShowWindow = SW_HIDE;
    }

    // We move the updater.ini file out of the way because we will handle
    // executing PostUpdate through the service.  We handle PostUpdate from
    // the service because there are some per user things that happen that
    // can't run in session 0 which we run updater.exe in.
    // Once we are done running updater.exe we rename updater.ini back so
    // that if there were any errors the next updater.exe will run correctly.
    WCHAR updaterINI[MAX_PATH + 1];
    WCHAR updaterINITemp[MAX_PATH + 1];
    BOOL selfHandlePostUpdate = FALSE;
    // We use the updater.ini from the same directory as the updater.exe
    // because of background updates.
    if (PathGetSiblingFilePath(updaterINI, argv[0], L"updater.ini") &&
            PathGetSiblingFilePath(updaterINITemp, argv[0], L"updater.tmp"))
    {
        selfHandlePostUpdate = MoveFileExW(updaterINI, updaterINITemp,
                                           MOVEFILE_REPLACE_EXISTING);
    }

    // Add an env var for USING_SERVICE so the updater.exe can
    // do anything special that it needs to do for service updates.
    // Search in updater.cpp for more info on USING_SERVICE.
    putenv(const_cast<char*>("USING_SERVICE=1"));
    LOG(("Starting service with cmdline: %ls", cmdLine));
    processStarted = CreateProcessW(argv[0], cmdLine,
                                    nullptr, nullptr, FALSE,
                                    CREATE_DEFAULT_ERROR_MODE,
                                    nullptr,
                                    nullptr, &si, &pi);
    // Empty value on putenv is how you remove an env variable in Windows
    putenv(const_cast<char*>("USING_SERVICE="));

    BOOL updateWasSuccessful = FALSE;
    if (processStarted)
    {
        // Wait for the updater process to finish
        LOG(("Process was started... waiting on result."));
        DWORD waitRes = WaitForSingleObject(pi.hProcess, TIME_TO_WAIT_ON_UPDATER);
        if (WAIT_TIMEOUT == waitRes)
        {
            // We waited a long period of time for updater.exe and it never finished
            // so kill it.
            TerminateProcess(pi.hProcess, 1);
        }
        else
        {
            // Check the return code of updater.exe to make sure we get 0
            DWORD returnCode;
            if (GetExitCodeProcess(pi.hProcess, &returnCode))
            {
                LOG(("Process finished with return code %d.", returnCode));
                // updater returns 0 if successful.
                updateWasSuccessful = (returnCode == 0);
            }
            else
            {
                LOG_WARN(("Process finished but could not obtain return code."));
            }
        }
        CloseHandle(pi.hProcess);
        CloseHandle(pi.hThread);

        // Check just in case updater.exe didn't change the status from
        // applying.  If this is the case we report an error.
        BOOL isApplying = FALSE;
        if (IsStatusApplying(argv[1], isApplying) && isApplying)
        {
            if (updateWasSuccessful)
            {
                LOG(("update.status is still applying even know update "
                     " was successful."));
                if (!WriteStatusFailure(argv[1],
                                        SERVICE_STILL_APPLYING_ON_SUCCESS))
                {
                    LOG_WARN(("Could not write update.status still applying on"
                              " success error."));
                }
                // Since we still had applying we know updater.exe didn't do its
                // job correctly.
                updateWasSuccessful = FALSE;
            }
            else
            {
                LOG_WARN(("update.status is still applying and update was not successful."));
                if (!WriteStatusFailure(argv[1],
                                        SERVICE_STILL_APPLYING_ON_FAILURE))
                {
                    LOG_WARN(("Could not write update.status still applying on"
                              " success error."));
                }
            }
        }
    }
    else
    {
        DWORD lastError = GetLastError();
        LOG_WARN(("Could not create process as current user, "
                  "updaterPath: %ls; cmdLine: %ls.  (%d)",
                  argv[0], cmdLine, lastError));
    }

    // Now that we're done with the update, restore back the updater.ini file
    // We use it ourselves, and also we want it back in case we had any type
    // of error so that the normal update process can use it.
    if (selfHandlePostUpdate)
    {
        MoveFileExW(updaterINITemp, updaterINI, MOVEFILE_REPLACE_EXISTING);

        // Only run the PostUpdate if the update was successful
        if (updateWasSuccessful && argc > index)
        {
            LPCWSTR updateInfoDir = argv[1];
            bool stagingUpdate = IsUpdateBeingStaged(argc, argv);

            // Launch the PostProcess with admin access in session 0.  This is
            // actually launching the post update process but it takes in the
            // callback app path to figure out where to apply to.
            // The PostUpdate process with user only access will be done inside
            // the unelevated updater.exe after the update process is complete
            // from the service.  We don't know here which session to start
            // the user PostUpdate process from.
            // Note that we don't need to do this if we're just staging the
            // update in the background, as the PostUpdate step runs when
            // performing the replacing in that case.
            if (!stagingUpdate)
            {
                LOG(("Launching post update process as the service in session 0."));
                if (!LaunchWinPostProcess(installDir, updateInfoDir, true, nullptr))
                {
                    LOG_WARN(("The post update process could not be launched."
                              " installDir: %ls, updateInfoDir: %ls",
                              installDir, updateInfoDir));
                }
            }
        }
    }

    free(cmdLine);
    return updateWasSuccessful;
}

/**
 * Processes a software update command
 *
 * @param  argc           The number of arguments in argv
 * @param  argv           The arguments normally passed to updater.exe
 *                        argv[0] must be the path to updater.exe
 * @return TRUE if the update was successful.
 */
BOOL
ProcessSoftwareUpdateCommand(DWORD argc, LPWSTR *argv)
{
    BOOL result = TRUE;
    if (argc < 3)
    {
        LOG_WARN(("Not enough command line parameters specified. "
                  "Updating update.status."));

        // We can only update update.status if argv[1] exists.  argv[1] is
        // the directory where the update.status file exists.
        if (argc < 2 ||
                !WriteStatusFailure(argv[1],
                                    SERVICE_NOT_ENOUGH_COMMAND_LINE_ARGS))
        {
            LOG_WARN(("Could not write update.status service update failure.  (%d)",
                      GetLastError()));
        }
        return FALSE;
    }

    WCHAR installDir[MAX_PATH + 1] = {L'\0'};
    if (!GetInstallationDir(argc, argv, installDir))
    {
        LOG_WARN(("Could not get the installation directory"));
        if (!WriteStatusFailure(argv[1],
                                SERVICE_INSTALLDIR_ERROR))
        {
            LOG_WARN(("Could not write update.status for GetInstallationDir failure."));
        }
        return FALSE;
    }

    // Make sure the path to the updater to use for the update is local.
    // We do this check to make sure that file locking is available for
    // race condition security checks.
    BOOL isLocal = FALSE;
    if (!IsLocalFile(argv[0], isLocal) || !isLocal)
    {
        LOG_WARN(("Filesystem in path %ls is not supported (%d)",
                  argv[0], GetLastError()));
        if (!WriteStatusFailure(argv[1],
                                SERVICE_UPDATER_NOT_FIXED_DRIVE))
        {
            LOG_WARN(("Could not write update.status service update failure.  (%d)",
                      GetLastError()));
        }
        return FALSE;
    }

    AutoHandle noWriteLock(CreateFileW(argv[0], GENERIC_READ, FILE_SHARE_READ,
                                       nullptr, OPEN_EXISTING, 0, nullptr));
    if (noWriteLock == INVALID_HANDLE_VALUE)
    {
        LOG_WARN(("Could not set no write sharing access on file.  (%d)",
                  GetLastError()));
        if (!WriteStatusFailure(argv[1],
                                SERVICE_COULD_NOT_LOCK_UPDATER))
        {
            LOG_WARN(("Could not write update.status service update failure.  (%d)",
                      GetLastError()));
        }
        return FALSE;
    }

    // Verify that the updater.exe that we are executing is the same
    // as the one in the installation directory which we are updating.
    // The installation dir that we are installing to is installDir.
    WCHAR installDirUpdater[MAX_PATH + 1] = { L'\0' };
    wcsncpy(installDirUpdater, installDir, MAX_PATH);
    if (!PathAppendSafe(installDirUpdater, L"updater.exe"))
    {
        LOG_WARN(("Install directory updater could not be determined."));
        result = FALSE;
    }

    BOOL updaterIsCorrect = FALSE;
    if (result && !VerifySameFiles(argv[0], installDirUpdater,
                                   updaterIsCorrect))
    {
        LOG_WARN(("Error checking if the updaters are the same.\n"
                  "Path 1: %ls\nPath 2: %ls", argv[0], installDirUpdater));
        result = FALSE;
    }

    if (result && !updaterIsCorrect)
    {
        LOG_WARN(("The updaters do not match, updater will not run.\n"
                  "Path 1: %ls\nPath 2: %ls", argv[0], installDirUpdater));
        result = FALSE;
    }

    if (result)
    {
        LOG(("updater.exe was compared successfully to the installation directory"
             " updater.exe."));
    }
    else
    {
        if (!WriteStatusFailure(argv[1],
                                SERVICE_UPDATER_COMPARE_ERROR))
        {
            LOG_WARN(("Could not write update.status updater compare failure."));
        }
        return FALSE;
    }

    // Check to make sure the updater.exe module has the unique updater identity.
    // This is a security measure to make sure that the signed executable that
    // we will run is actually an updater.
    HMODULE updaterModule = LoadLibraryEx(argv[0], nullptr,
                                          LOAD_LIBRARY_AS_DATAFILE);
    if (!updaterModule)
    {
        LOG_WARN(("updater.exe module could not be loaded. (%d)", GetLastError()));
        result = FALSE;
    }
    else
    {
        char updaterIdentity[64];
        if (!LoadStringA(updaterModule, IDS_UPDATER_IDENTITY,
                         updaterIdentity, sizeof(updaterIdentity)))
        {
            LOG_WARN(("The updater.exe application does not contain the Mozilla"
                      " updater identity."));
            result = FALSE;
        }

        if (strcmp(updaterIdentity, UPDATER_IDENTITY_STRING))
        {
            LOG_WARN(("The updater.exe identity string is not valid."));
            result = FALSE;
        }
        FreeLibrary(updaterModule);
    }

    if (result)
    {
        LOG(("The updater.exe application contains the Mozilla"
             " updater identity."));
    }
    else
    {
        if (!WriteStatusFailure(argv[1],
                                SERVICE_UPDATER_IDENTITY_ERROR))
        {
            LOG_WARN(("Could not write update.status no updater identity."));
        }
        return TRUE;
    }

    // Check for updater.exe sign problems
    BOOL updaterSignProblem = FALSE;
#ifndef DISABLE_UPDATER_AUTHENTICODE_CHECK
    updaterSignProblem = !DoesBinaryMatchAllowedCertificates(installDir,
                         argv[0]);
#endif

    // Only proceed with the update if we have no signing problems
    if (!updaterSignProblem)
    {
        BOOL updateProcessWasStarted = FALSE;
        if (StartUpdateProcess(argc, argv, installDir,
                               updateProcessWasStarted))
        {
            LOG(("updater.exe was launched and run successfully!"));
            LogFlush();

            // Don't attempt to update the service when the update is being staged.
            if (!IsUpdateBeingStaged(argc, argv))
            {
                // We might not execute code after StartServiceUpdate because
                // the service installer will stop the service if it is running.
                StartServiceUpdate(installDir);
            }
        }
        else
        {
            result = FALSE;
            LOG_WARN(("Error running update process. Updating update.status  (%d)",
                      GetLastError()));
            LogFlush();

            // If the update process was started, then updater.exe is responsible for
            // setting the failure code.  If it could not be started then we do the
            // work.  We set an error instead of directly setting status pending
            // so that the app.update.service.errors pref can be updated when
            // the callback app restarts.
            if (!updateProcessWasStarted)
            {
                if (!WriteStatusFailure(argv[1],
                                        SERVICE_UPDATER_COULD_NOT_BE_STARTED))
                {
                    LOG_WARN(("Could not write update.status service update failure.  (%d)",
                              GetLastError()));
                }
            }
        }
    }
    else
    {
        result = FALSE;
        LOG_WARN(("Could not start process due to certificate check error on "
                  "updater.exe. Updating update.status.  (%d)", GetLastError()));

        // When there is a certificate check error on the updater.exe application,
        // we want to write out the error.
        if (!WriteStatusFailure(argv[1],
                                SERVICE_UPDATER_SIGN_ERROR))
        {
            LOG_WARN(("Could not write pending state to update.status.  (%d)",
                      GetLastError()));
        }
    }

    return result;
}

/**
 * Obtains the updater path alongside a subdir of the service binary.
 * The purpose of this function is to return a path that is likely high
 * integrity and therefore more safe to execute code from.
 *
 * @param serviceUpdaterPath Out parameter for the path where the updater
 *                           should be copied to.
 * @return TRUE if a file path was obtained.
 */
BOOL
GetSecureUpdaterPath(WCHAR serviceUpdaterPath[MAX_PATH + 1])
{
    if (!GetModuleFileNameW(nullptr, serviceUpdaterPath, MAX_PATH))
    {
        LOG_WARN(("Could not obtain module filename when attempting to "
                  "use a secure updater path.  (%d)", GetLastError()));
        return FALSE;
    }

    if (!PathRemoveFileSpecW(serviceUpdaterPath))
    {
        LOG_WARN(("Couldn't remove file spec when attempting to use a secure "
                  "updater path.  (%d)", GetLastError()));
        return FALSE;
    }

    if (!PathAppendSafe(serviceUpdaterPath, L"update"))
    {
        LOG_WARN(("Couldn't append file spec when attempting to use a secure "
                  "updater path.  (%d)", GetLastError()));
        return FALSE;
    }

    CreateDirectoryW(serviceUpdaterPath, nullptr);

    if (!PathAppendSafe(serviceUpdaterPath, L"updater.exe"))
    {
        LOG_WARN(("Couldn't append file spec when attempting to use a secure "
                  "updater path.  (%d)", GetLastError()));
        return FALSE;
    }

    return TRUE;
}

/**
 * Deletes the passed in updater path and the associated updater.ini file.
 *
 * @param serviceUpdaterPath The path to delete.
 * @return TRUE if a file was deleted.
 */
BOOL
DeleteSecureUpdater(WCHAR serviceUpdaterPath[MAX_PATH + 1])
{
    BOOL result = FALSE;
    if (serviceUpdaterPath[0])
    {
        result = DeleteFileW(serviceUpdaterPath);
        if (!result && GetLastError() != ERROR_PATH_NOT_FOUND &&
                GetLastError() != ERROR_FILE_NOT_FOUND)
        {
            LOG_WARN(("Could not delete service updater path: '%ls'.",
                      serviceUpdaterPath));
        }

        WCHAR updaterINIPath[MAX_PATH + 1] = { L'\0' };
        if (PathGetSiblingFilePath(updaterINIPath, serviceUpdaterPath,
                                   L"updater.ini"))
        {
            result = DeleteFileW(updaterINIPath);
            if (!result && GetLastError() != ERROR_PATH_NOT_FOUND &&
                    GetLastError() != ERROR_FILE_NOT_FOUND)
            {
                LOG_WARN(("Could not delete service updater INI path: '%ls'.",
                          updaterINIPath));
            }
        }
    }
    return result;
}

/**
 * Executes a service command.
 *
 * @param argc The number of arguments in argv
 * @param argv The service command line arguments, argv[0] and argv[1]
 *             and automatically included by Windows.  argv[2] is the
 *             service command.
 *
 * @return FALSE if there was an error executing the service command.
 */
BOOL
ExecuteServiceCommand(int argc, LPWSTR *argv)
{
    if (argc < 3)
    {
        LOG_WARN(("Not enough command line arguments to execute a service command"));
        return FALSE;
    }

    // The tests work by making sure the log has changed, so we put a
    // unique ID in the log.
    RPC_WSTR guidString = RPC_WSTR(L"");
    GUID guid;
    HRESULT hr = CoCreateGuid(&guid);
    if (SUCCEEDED(hr))
    {
        UuidToString(&guid, &guidString);
    }
    LOG(("Executing service command %ls, ID: %ls",
         argv[2], reinterpret_cast<LPCWSTR>(guidString)));
    RpcStringFree(&guidString);

    BOOL result = FALSE;
    if (!lstrcmpi(argv[2], L"software-update"))
    {

        // Use the passed in command line arguments for the update, except for the
        // path to updater.exe.  We copy updater.exe to a the directory of the
        // MozillaMaintenance service so that a low integrity process cannot
        // replace the updater.exe at any point and use that for the update.
        // It also makes DLL injection attacks harder.
        LPWSTR oldUpdaterPath = argv[3];
        WCHAR secureUpdaterPath[MAX_PATH + 1] = { L'\0' };
        result = GetSecureUpdaterPath(secureUpdaterPath); // Does its own logging
        if (result)
        {
            LOG(("Passed in path: '%ls'; Using this path for updating: '%ls'.",
                 oldUpdaterPath, secureUpdaterPath));
            DeleteSecureUpdater(secureUpdaterPath);
            result = CopyFileW(oldUpdaterPath, secureUpdaterPath, FALSE);
        }

        if (!result)
        {
            LOG_WARN(("Could not copy path to secure location.  (%d)",
                      GetLastError()));
            if (argc > 4 && !WriteStatusFailure(argv[4],
                                                SERVICE_COULD_NOT_COPY_UPDATER))
            {
                LOG_WARN(("Could not write update.status could not copy updater error"));
            }
        }
        else
        {

            // We obtained the path and copied it successfully, update the path to
            // use for the service update.
            argv[3] = secureUpdaterPath;

            WCHAR oldUpdaterINIPath[MAX_PATH + 1] = { L'\0' };
            WCHAR secureUpdaterINIPath[MAX_PATH + 1] = { L'\0' };
            if (PathGetSiblingFilePath(secureUpdaterINIPath, secureUpdaterPath,
                                       L"updater.ini") &&
                    PathGetSiblingFilePath(oldUpdaterINIPath, oldUpdaterPath,
                                           L"updater.ini"))
            {
                // This is non fatal if it fails there is no real harm
                if (!CopyFileW(oldUpdaterINIPath, secureUpdaterINIPath, FALSE))
                {
                    LOG_WARN(("Could not copy updater.ini from: '%ls' to '%ls'.  (%d)",
                              oldUpdaterINIPath, secureUpdaterINIPath, GetLastError()));
                }
            }

            result = ProcessSoftwareUpdateCommand(argc - 3, argv + 3);
            DeleteSecureUpdater(secureUpdaterPath);
        }

        // We might not reach here if the service install succeeded
        // because the service self updates itself and the service
        // installer will stop the service.
        LOG(("Service command %ls complete.", argv[2]));
    }
    else
    {
        LOG_WARN(("Service command not recognized: %ls.", argv[2]));
        // result is already set to FALSE
    }

    LOG(("service command %ls complete with result: %ls.",
         argv[1], (result ? L"Success" : L"Failure")));
    return TRUE;
}