/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace ::com::sun::star; namespace { const OUString sDataDirectory("svx/qa/unit/data/"); /// Tests for svx/source/customshapes/ code. class CustomshapesTest : public test::BootstrapFixture, public unotest::MacrosTest { protected: uno::Reference mxComponent; // get shape nShapeIndex from page 0 uno::Reference getShape(sal_uInt8 nShapeIndex); public: virtual void setUp() override { test::BootstrapFixture::setUp(); mxDesktop.set(frame::Desktop::create(m_xContext)); } virtual void tearDown() override { if (mxComponent.is()) { mxComponent->dispose(); } test::BootstrapFixture::tearDown(); } }; uno::Reference CustomshapesTest::getShape(sal_uInt8 nShapeIndex) { uno::Reference xDrawPagesSupplier(mxComponent, uno::UNO_QUERY_THROW); CPPUNIT_ASSERT_MESSAGE("Could not get XDrawPagesSupplier", xDrawPagesSupplier.is()); uno::Reference xDrawPages(xDrawPagesSupplier->getDrawPages()); uno::Reference xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY_THROW); CPPUNIT_ASSERT_MESSAGE("Could not get xDrawPage", xDrawPage.is()); uno::Reference xShape(xDrawPage->getByIndex(nShapeIndex), uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get xShape", xShape.is()); return xShape; } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testViewBoxLeftTop) { // tdf#121890 formula values "left" and "top" are wrongly calculated // Load a document with two custom shapes of type "non-primitive" OUString aURL = m_directories.getURLFromSrc(sDataDirectory) + "viewBox_positive_twolines_strict.odp"; mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Get the shape "leftright". Error was, that the identifier "left" was always set to zero, thus // the path was outside the frame rectangle for a viewBox having a positive "left" value. uno::Reference xShapeLR(getShape(0)); uno::Reference xShapeLRProps(xShapeLR, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape 'leftright' properties", xShapeLRProps.is()); awt::Rectangle aFrameRectLR; xShapeLRProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRectLR; awt::Rectangle aBoundRectLR; xShapeLRProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectLR; // difference should be zero, but allow some rounding errors CPPUNIT_ASSERT_LESS(static_cast(3), labs(aFrameRectLR.X - aBoundRectLR.X)); // Get the shape "topbottom". Error was, that the identifier "top" was always set to zero, thus // the path was outside the frame rectangle for a viewBox having a positive "top" value. uno::Reference xShapeTB(getShape(1)); uno::Reference xShapeTBProps(xShapeTB, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape 'topbottom' properties", xShapeTBProps.is()); awt::Rectangle aFrameRectTB; xShapeTBProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRectTB; awt::Rectangle aBoundRectTB; xShapeTBProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectTB; // difference should be zero, but allow some rounding errors CPPUNIT_ASSERT_LESS(static_cast(3), labs(aFrameRectTB.Y - aBoundRectTB.Y)); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testAccuracyCommandX) { // 121761 Increase accuracy of quarter circles drawn by command X or Y // The loaded document has a quarter circle with radius 10000 (unit 1/100 mm) // which is rotated by 45deg. The test considers the segment. OUString aURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf121761_Accuracy_command_X.odp"; mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Get the shape "arc_45deg_rotated". Error was, that a Bezier curve with bad parameters // was used, thus the segment height was obviously smaller than for a true circle. // Math: segment height approx 10000 * ( 1 - sqrt(0.5)) + line width uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; double fHeight = static_cast(aBoundRect.Height); // The tolerance is a guess, might be smaller. CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("segment height out of tolerance", 2942.0, fHeight, 8.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testToggleCommandXY) { // 121952 Toggle x- and y-direction if command X has several parameters // The loaded document has a shape with command X and two parameter placed on a diagonal. // The radius of the quarter circles are both 10000 (unit 1/100 mm). // The shape is rotated by 45deg, so you get two segments, one up and one down. OUString aURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf121952_Toggle_direction_command_X.odp"; mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.presentation.PresentationDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Error was, that the second segment was drawn with same direction as first one. If drawn // correctly, the bounding box height of the segments together is about twice the single // segment height. Math: segment height approx 10000 * ( 1 - sqrt(0.5)) + line width uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; double fHeight = static_cast(aBoundRect.Height); // The tolerance is a guess, might be smaller. CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("segment height out of tolerance", 5871.0, fHeight, 16.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testMultipleMoveTo) { // tdf122964 Multiple moveTo has to be treated as lineTo in draw:enhanced-path // Load a document with path "M 0 0 5 10 10 0 N" OUString aURL = m_directories.getURLFromSrc(sDataDirectory) + "tdf122964_MultipleMoveTo.odg"; mxComponent = loadFromDesktop(aURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Error was, that the second and further parameter pairs were treated as moveTo, // and so the generated path was empty, resulting in zero width and height of the // bounding box. It has to be treated same as "M 0 0 L 5 10 10 0 N". uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; bool bIsZero(aBoundRect.Height == 0 && aBoundRect.Width == 0); CPPUNIT_ASSERT_MESSAGE("Path is empty", !bIsZero); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testWidthOrientationCommandU) { // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document with path "M 750 0 L 750 500 250 500 250 0 U 500 0 500 500 0 180 N" // in viewBox="0 0 1000 500" and width="10cm", height="5cm". const OUString sFileName("tdf121845_WidthOrientation_command_U.odg"); const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Error was, that the width and height of the ellipse was halved and that the ellipse // was not drawn clockwise but counter clockwise. uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; const double fWidth = static_cast(aBoundRect.Width); // Need some tolerance for line width CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("wrong width", 10000.0, fWidth, 40.0); const double fHeight = static_cast(aBoundRect.Height); // Wrong orientation draws segment above the top of the viewBox and so increases 'Height'. CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("wrong orientation", 5000.0, fHeight, 40.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testHalfEllipseVML) { // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document which was converted from VML to doc by Word. It had a VML // path="m750,al500,,500,500,,-11796480e" resulting in a lower half circle. const OUString sFileName("tdf121845_HalfEllipseVML.doc"); const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Error was, that a full circle instead of the half circle was draw. uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; const double fDiff2HmW = static_cast(2 * aBoundRect.Height - aBoundRect.Width); // Need some tolerance for line width CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("not a half circle", 0.0, fDiff2HmW, 40.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testLargeSwingAngleVML) { // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document which was converted from VML to doc by Word. It had a VML // path="al50,50,45,45,2621440,31457280e" resulting in a full circle plus 120 deg segment. const OUString sFileName("tdf121845_start40_swing480.doc"); const OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); // Error was, that only the 120 deg segment was drawn. uno::Reference xShape(getShape(0)); uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aBoundRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; const double fDiffWmH = static_cast(aBoundRect.Width - aBoundRect.Height); // Need some tolerance for line width CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("Full circle plus segment expected", 0.0, fDiffWmH, 10.0); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf121845_two_commands_U) { // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document with path "U 950 250 200 200 90 180 250 250 200 200 180 270 N" // Error was, that the second ellipse segment was interpreted as command T and // thus a line from first to second segment was drawn. const OUString sFileName("tdf121845_Two_commands_U.odg"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); uno::Reference xShape(getShape(0)); // In case no line is drawn, two polygons are generated; with line only one polygon SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); SdrPathObj* pPathObj = static_cast(aCustomShape2d.CreateLineGeometry()); CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly()); CPPUNIT_ASSERT_EQUAL_MESSAGE("count polygons", static_cast(2), aPolyPolygon.count()); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124212_handle_position) { // tdf124212 Adjustment handle reacts wrongly, if custom shape has a non // default viewBox. Load a document with svg:viewBox="10800 0 10800 21600" // Error was, that moving the controller results in a handle position that // does not reflect the movement. const OUString sFileName("tdf124212_handle_position.odg"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.drawing.DrawingDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); uno::Reference xShape(getShape(0)); // The shape has one, horizontal adjust handle. SdrObjCustomShape& rSdrObjCustomShape( static_cast(*GetSdrObjectFromXShape(xShape))); EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape); Point aInitialPosition; aCustomShape2d.GetHandlePosition(0, aInitialPosition); css::awt::Point aDesiredPosition(aInitialPosition.X() + 1000, aInitialPosition.Y()); aCustomShape2d.SetHandleControllerPosition(0, aDesiredPosition); Point aObservedPosition; aCustomShape2d.GetHandlePosition(0, aObservedPosition); sal_Int32 nDesiredX(aDesiredPosition.X); // awt::Point sal_Int32 nObservedX(aObservedPosition.X()); // tools::Point CPPUNIT_ASSERT_EQUAL_MESSAGE("handle X coordinate", nDesiredX, nObservedX); } CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124029_arc_position) { // tdf121029 MS binary custom shape mso_sptArc has wrong position // MS uses the sector for position reference. Error was, that // LibreOffice has used the underlying ellipse. const OUString sFileName("tdf124029_Arc_position.doc"); OUString sURL = m_directories.getURLFromSrc(sDataDirectory) + sFileName; mxComponent = loadFromDesktop(sURL, "com.sun.star.comp.text.TextDocument"); CPPUNIT_ASSERT_MESSAGE("Could not load document", mxComponent.is()); uno::Reference xShape(getShape(0)); // The visual wrong position is due to a wrong shape width. uno::Reference xShapeProps(xShape, uno::UNO_QUERY); CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is()); awt::Rectangle aFrameRect; xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRect; CPPUNIT_ASSERT_EQUAL_MESSAGE("shape width", static_cast(1610), static_cast(aFrameRect.Width)); } } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */