/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include namespace sdr { namespace contact { ViewContactOfPageSubObject::ViewContactOfPageSubObject(ViewContactOfSdrPage& rParentViewContactOfSdrPage) : mrParentViewContactOfSdrPage(rParentViewContactOfSdrPage) { } ViewContactOfPageSubObject::~ViewContactOfPageSubObject() { } ViewContact* ViewContactOfPageSubObject::GetParentContact() const { return &mrParentViewContactOfSdrPage; } const SdrPage& ViewContactOfPageSubObject::getPage() const { return mrParentViewContactOfSdrPage.GetSdrPage(); } ViewObjectContact& ViewContactOfPageBackground::CreateObjectSpecificViewObjectContact(ObjectContact& rObjectContact) { ViewObjectContact* pRetval = new ViewObjectContactOfPageBackground(rObjectContact, *this); DBG_ASSERT(pRetval, "ViewContact::CreateObjectSpecificViewObjectContact() failed (!)"); return *pRetval; } drawinglayer::primitive2d::Primitive2DContainer ViewContactOfPageBackground::createViewIndependentPrimitive2DSequence() const { // We have only the page information, not the view information. Use the // svtools::DOCCOLOR color for initialisation const svtools::ColorConfig aColorConfig; const Color aInitColor(aColorConfig.GetColorValue(svtools::DOCCOLOR).nColor); const basegfx::BColor aRGBColor(aInitColor.getBColor()); const drawinglayer::primitive2d::Primitive2DReference xReference( new drawinglayer::primitive2d::BackgroundColorPrimitive2D(aRGBColor)); return drawinglayer::primitive2d::Primitive2DContainer { xReference }; } ViewContactOfPageBackground::ViewContactOfPageBackground(ViewContactOfSdrPage& rParentViewContactOfSdrPage) : ViewContactOfPageSubObject(rParentViewContactOfSdrPage) { } ViewContactOfPageBackground::~ViewContactOfPageBackground() { } ViewObjectContact& ViewContactOfPageShadow::CreateObjectSpecificViewObjectContact(ObjectContact& rObjectContact) { ViewObjectContact* pRetval = new ViewObjectContactOfPageShadow(rObjectContact, *this); DBG_ASSERT(pRetval, "ViewContact::CreateObjectSpecificViewObjectContact() failed (!)"); return *pRetval; } drawinglayer::primitive2d::Primitive2DContainer ViewContactOfPageShadow::createViewIndependentPrimitive2DSequence() const { static bool bUseOldPageShadow(false); // loplugin:constvars:ignore const SdrPage& rPage = getPage(); basegfx::B2DHomMatrix aPageMatrix; aPageMatrix.set(0, 0, static_cast(rPage.GetWidth())); aPageMatrix.set(1, 1, static_cast(rPage.GetHeight())); if(bUseOldPageShadow) { // create page shadow polygon const double fPageBorderFactor(1.0 / 256.0); basegfx::B2DPolygon aPageShadowPolygon; aPageShadowPolygon.append(basegfx::B2DPoint(1.0, fPageBorderFactor)); aPageShadowPolygon.append(basegfx::B2DPoint(1.0 + fPageBorderFactor, fPageBorderFactor)); aPageShadowPolygon.append(basegfx::B2DPoint(1.0 + fPageBorderFactor, 1.0 + fPageBorderFactor)); aPageShadowPolygon.append(basegfx::B2DPoint(fPageBorderFactor, 1.0 + fPageBorderFactor)); aPageShadowPolygon.append(basegfx::B2DPoint(fPageBorderFactor, 1.0)); aPageShadowPolygon.append(basegfx::B2DPoint(1.0, 1.0)); aPageShadowPolygon.setClosed(true); aPageShadowPolygon.transform(aPageMatrix); // We have only the page information, not the view information. Use the // svtools::FONTCOLOR color for initialisation const svtools::ColorConfig aColorConfig; const Color aShadowColor(aColorConfig.GetColorValue(svtools::FONTCOLOR).nColor); const basegfx::BColor aRGBShadowColor(aShadowColor.getBColor()); const drawinglayer::primitive2d::Primitive2DReference xReference( new drawinglayer::primitive2d::PolyPolygonColorPrimitive2D( basegfx::B2DPolyPolygon(aPageShadowPolygon), aRGBShadowColor)); return drawinglayer::primitive2d::Primitive2DContainer { xReference }; } else { static vcl::DeleteOnDeinit< drawinglayer::primitive2d::DiscreteShadow > aDiscreteShadow( new drawinglayer::primitive2d::DiscreteShadow( BitmapEx(SIP_SA_PAGESHADOW35X35))); if(aDiscreteShadow.get()) { const drawinglayer::primitive2d::Primitive2DReference xReference( new drawinglayer::primitive2d::DiscreteShadowPrimitive2D( aPageMatrix, *aDiscreteShadow.get())); return drawinglayer::primitive2d::Primitive2DContainer { xReference }; } return drawinglayer::primitive2d::Primitive2DContainer(); } } ViewContactOfPageShadow::ViewContactOfPageShadow(ViewContactOfSdrPage& rParentViewContactOfSdrPage) : ViewContactOfPageSubObject(rParentViewContactOfSdrPage) { } ViewContactOfPageShadow::~ViewContactOfPageShadow() { } ViewObjectContact& ViewContactOfMasterPage::CreateObjectSpecificViewObjectContact(ObjectContact& rObjectContact) { ViewObjectContact* pRetval = new ViewObjectContactOfMasterPage(rObjectContact, *this); DBG_ASSERT(pRetval, "ViewContact::CreateObjectSpecificViewObjectContact() failed (!)"); return *pRetval; } drawinglayer::primitive2d::Primitive2DContainer ViewContactOfMasterPage::createViewIndependentPrimitive2DSequence() const { drawinglayer::primitive2d::Primitive2DContainer xRetval; // this class is used when the page is a MasterPage and is responsible to // create a visualisation for the MPBGO, if exists. This needs to be suppressed // when a SdrPage which uses a MasterPage creates it's output. Suppression // is done in the corresponding VOC since DisplayInfo data is needed const SdrPage& rPage = getPage(); if(rPage.IsMasterPage()) { if(0 == rPage.GetPageNum()) { // #i98063# // filter MasterPage 0 since it's the HandoutPage. Thus, it's a // MasterPage, but has no MPBGO, so there is nothing to do here. } else { drawinglayer::attribute::SdrFillAttribute aFill; // #i110846# Suppress SdrPage FillStyle for MasterPages without StyleSheets, // else the PoolDefault (XFILL_COLOR and Blue8) will be used. Normally, all // MasterPages should have a StyleSheet exactly for this reason, but historically // e.g. the Notes MasterPage has no StyleSheet set (and there maybe others). if(rPage.getSdrPageProperties().GetStyleSheet()) { // create page fill attributes with correct properties aFill = drawinglayer::primitive2d::createNewSdrFillAttribute( rPage.getSdrPageProperties().GetItemSet()); } if(!aFill.isDefault()) { // direct model data is the page size, get and use it const basegfx::B2DRange aInnerRange( rPage.GetLeftBorder(), rPage.GetUpperBorder(), rPage.GetWidth() - rPage.GetRightBorder(), rPage.GetHeight() - rPage.GetLowerBorder()); const basegfx::B2DPolygon aInnerPolgon(basegfx::utils::createPolygonFromRect(aInnerRange)); const drawinglayer::primitive2d::Primitive2DReference xReference( drawinglayer::primitive2d::createPolyPolygonFillPrimitive( basegfx::B2DPolyPolygon(aInnerPolgon), aFill, drawinglayer::attribute::FillGradientAttribute())); xRetval = drawinglayer::primitive2d::Primitive2DContainer { xReference }; } } } return xRetval; } ViewContactOfMasterPage::ViewContactOfMasterPage(ViewContactOfSdrPage& rParentViewContactOfSdrPage) : ViewContactOfPageSubObject(rParentViewContactOfSdrPage) { } ViewContactOfMasterPage::~ViewContactOfMasterPage() { } ViewObjectContact& ViewContactOfPageFill::CreateObjectSpecificViewObjectContact(ObjectContact& rObjectContact) { ViewObjectContact* pRetval = new ViewObjectContactOfPageFill(rObjectContact, *this); DBG_ASSERT(pRetval, "ViewContact::CreateObjectSpecificViewObjectContact() failed (!)"); return *pRetval; } drawinglayer::primitive2d::Primitive2DContainer ViewContactOfPageFill::createViewIndependentPrimitive2DSequence() const { const SdrPage& rPage = getPage(); const basegfx::B2DRange aPageFillRange(0.0, 0.0, static_cast(rPage.GetWidth()), static_cast(rPage.GetHeight())); const basegfx::B2DPolygon aPageFillPolygon(basegfx::utils::createPolygonFromRect(aPageFillRange)); // We have only the page information, not the view information. Use the // svtools::DOCCOLOR color for initialisation const svtools::ColorConfig aColorConfig; const Color aPageFillColor(aColorConfig.GetColorValue(svtools::DOCCOLOR).nColor); // create and add primitive const basegfx::BColor aRGBColor(aPageFillColor.getBColor()); const drawinglayer::primitive2d::Primitive2DReference xReference(new drawinglayer::primitive2d::PolyPolygonColorPrimitive2D(basegfx::B2DPolyPolygon(aPageFillPolygon), aRGBColor)); return drawinglayer::primitive2d::Primitive2DContainer { xReference }; } ViewContactOfPageFill::ViewContactOfPageFill(ViewContactOfSdrPage& rParentViewContactOfSdrPage) : ViewContactOfPageSubObject(rParentViewContactOfSdrPage) { } ViewContactOfPageFill::~ViewContactOfPageFill() { } ViewObjectContact& ViewContactOfOuterPageBorder::CreateObjectSpecificViewObjectContact(ObjectContact& rObjectContact) { ViewObjectContact* pRetval = new ViewObjectContactOfOuterPageBorder(rObjectContact, *this); DBG_ASSERT(pRetval, "ViewContact::CreateObjectSpecificViewObjectContact() failed (!)"); return *pRetval; } drawinglayer::primitive2d::Primitive2DContainer ViewContactOfOuterPageBorder::createViewIndependentPrimitive2DSequence() const { drawinglayer::primitive2d::Primitive2DContainer xRetval; const SdrPage& rPage = getPage(); const basegfx::B2DRange aPageBorderRange(0.0, 0.0, static_cast(rPage.GetWidth()), static_cast(rPage.GetHeight())); // Changed to 0x949599 for renaissance, before svtools::FONTCOLOR was used. // Added old case as fallback for HighContrast. basegfx::BColor aRGBBorderColor(0x94 / double(0xff), 0x95 / double(0xff), 0x99 / double(0xff)); if(Application::GetSettings().GetStyleSettings().GetHighContrastMode()) { const svtools::ColorConfig aColorConfig; const Color aBorderColor(aColorConfig.GetColorValue(svtools::FONTCOLOR).nColor); aRGBBorderColor = aBorderColor.getBColor(); } if(rPage.getPageBorderOnlyLeftRight()) { // #i93597# for Report Designer, the page border shall be only displayed right and left, // but not top and bottom. Create simplified geometry. basegfx::B2DPolygon aLeft, aRight; aLeft.append(basegfx::B2DPoint(aPageBorderRange.getMinX(), aPageBorderRange.getMinY())); aLeft.append(basegfx::B2DPoint(aPageBorderRange.getMinX(), aPageBorderRange.getMaxY())); aRight.append(basegfx::B2DPoint(aPageBorderRange.getMaxX(), aPageBorderRange.getMinY())); aRight.append(basegfx::B2DPoint(aPageBorderRange.getMaxX(), aPageBorderRange.getMaxY())); xRetval.resize(2); xRetval[0] = drawinglayer::primitive2d::Primitive2DReference(new drawinglayer::primitive2d::PolygonHairlinePrimitive2D(aLeft, aRGBBorderColor)); xRetval[1] = drawinglayer::primitive2d::Primitive2DReference(new drawinglayer::primitive2d::PolygonHairlinePrimitive2D(aRight, aRGBBorderColor)); } else { xRetval.resize(1); const basegfx::B2DPolygon aPageBorderPolygon(basegfx::utils::createPolygonFromRect(aPageBorderRange)); xRetval[0] = drawinglayer::primitive2d::Primitive2DReference(new drawinglayer::primitive2d::PolygonHairlinePrimitive2D(aPageBorderPolygon, aRGBBorderColor)); } return xRetval; } ViewContactOfOuterPageBorder::ViewContactOfOuterPageBorder(ViewContactOfSdrPage& rParentViewContactOfSdrPage) : ViewContactOfPageSubObject(rParentViewContactOfSdrPage) { } ViewContactOfOuterPageBorder::~ViewContactOfOuterPageBorder() { } ViewObjectContact& ViewContactOfInnerPageBorder::CreateObjectSpecificViewObjectContact(ObjectContact& rObjectContact) { ViewObjectContact* pRetval = new ViewObjectContactOfInnerPageBorder(rObjectContact, *this); DBG_ASSERT(pRetval, "ViewContact::CreateObjectSpecificViewObjectContact() failed (!)"); return *pRetval; } drawinglayer::primitive2d::Primitive2DContainer ViewContactOfInnerPageBorder::createViewIndependentPrimitive2DSequence() const { const SdrPage& rPage = getPage(); const basegfx::B2DRange aPageBorderRange( static_cast(rPage.GetLeftBorder()), static_cast(rPage.GetUpperBorder()), static_cast(rPage.GetWidth() - rPage.GetRightBorder()), static_cast(rPage.GetHeight() - rPage.GetLowerBorder())); const basegfx::B2DPolygon aPageBorderPolygon(basegfx::utils::createPolygonFromRect(aPageBorderRange)); // We have only the page information, not the view information. Use the // svtools::FONTCOLOR or svtools::DOCBOUNDARIES color for initialisation const svtools::ColorConfig aColorConfig; Color aBorderColor; if(Application::GetSettings().GetStyleSettings().GetHighContrastMode()) { aBorderColor = aColorConfig.GetColorValue(svtools::FONTCOLOR).nColor; } else { svtools::ColorConfigValue aBorderConfig = aColorConfig.GetColorValue(svtools::DOCBOUNDARIES); aBorderColor = aBorderConfig.bIsVisible ? aBorderConfig.nColor : aColorConfig.GetColorValue(svtools::DOCCOLOR).nColor; } // create page outer border primitive const basegfx::BColor aRGBBorderColor(aBorderColor.getBColor()); const drawinglayer::primitive2d::Primitive2DReference xReference(new drawinglayer::primitive2d::PolygonHairlinePrimitive2D(aPageBorderPolygon, aRGBBorderColor)); return drawinglayer::primitive2d::Primitive2DContainer { xReference }; } ViewContactOfInnerPageBorder::ViewContactOfInnerPageBorder(ViewContactOfSdrPage& rParentViewContactOfSdrPage) : ViewContactOfPageSubObject(rParentViewContactOfSdrPage) { } ViewContactOfInnerPageBorder::~ViewContactOfInnerPageBorder() { } ViewObjectContact& ViewContactOfPageHierarchy::CreateObjectSpecificViewObjectContact(ObjectContact& rObjectContact) { ViewObjectContact* pRetval = new ViewObjectContactOfPageHierarchy(rObjectContact, *this); DBG_ASSERT(pRetval, "ViewContact::CreateObjectSpecificViewObjectContact() failed (!)"); return *pRetval; } drawinglayer::primitive2d::Primitive2DContainer ViewContactOfPageHierarchy::createViewIndependentPrimitive2DSequence() const { // collect sub-hierarchy drawinglayer::primitive2d::Primitive2DContainer xRetval; const sal_uInt32 nObjectCount(GetObjectCount()); // collect all sub-primitives for(sal_uInt32 a(0); a < nObjectCount; a++) { const ViewContact& rCandidate(GetViewContact(a)); const drawinglayer::primitive2d::Primitive2DContainer& aCandSeq(rCandidate.getViewIndependentPrimitive2DContainer()); xRetval.insert(xRetval.end(), aCandSeq.begin(), aCandSeq.end()); } return xRetval; } ViewContactOfPageHierarchy::ViewContactOfPageHierarchy(ViewContactOfSdrPage& rParentViewContactOfSdrPage) : ViewContactOfPageSubObject(rParentViewContactOfSdrPage) { } ViewContactOfPageHierarchy::~ViewContactOfPageHierarchy() { } sal_uInt32 ViewContactOfPageHierarchy::GetObjectCount() const { return getPage().GetObjCount(); } ViewContact& ViewContactOfPageHierarchy::GetViewContact(sal_uInt32 nIndex) const { SdrObject* pObj = getPage().GetObj(nIndex); assert(pObj && "ViewContactOfPageHierarchy::GetViewContact: Corrupt SdrObjList (!)"); return pObj->GetViewContact(); } ViewObjectContact& ViewContactOfGrid::CreateObjectSpecificViewObjectContact(ObjectContact& rObjectContact) { ViewObjectContact* pRetval = new ViewObjectContactOfPageGrid(rObjectContact, *this); DBG_ASSERT(pRetval, "ViewContact::CreateObjectSpecificViewObjectContact() failed (!)"); return *pRetval; } drawinglayer::primitive2d::Primitive2DContainer ViewContactOfGrid::createViewIndependentPrimitive2DSequence() const { // We have only the page information, not the view information and thus no grid settings. Create empty // default. For the view-dependent implementation, see ViewObjectContactOfPageGrid::createPrimitive2DSequence return drawinglayer::primitive2d::Primitive2DContainer(); } ViewContactOfGrid::ViewContactOfGrid(ViewContactOfSdrPage& rParentViewContactOfSdrPage, bool bFront) : ViewContactOfPageSubObject(rParentViewContactOfSdrPage), mbFront(bFront) { } ViewContactOfGrid::~ViewContactOfGrid() { } ViewObjectContact& ViewContactOfHelplines::CreateObjectSpecificViewObjectContact(ObjectContact& rObjectContact) { ViewObjectContact* pRetval = new ViewObjectContactOfPageHelplines(rObjectContact, *this); DBG_ASSERT(pRetval, "ViewContact::CreateObjectSpecificViewObjectContact() failed (!)"); return *pRetval; } drawinglayer::primitive2d::Primitive2DContainer ViewContactOfHelplines::createViewIndependentPrimitive2DSequence() const { // We have only the page information, not the view information and thus no helplines. Create empty // default. For the view-dependent implementation, see ViewObjectContactOfPageHelplines::createPrimitive2DSequence return drawinglayer::primitive2d::Primitive2DContainer(); } ViewContactOfHelplines::ViewContactOfHelplines(ViewContactOfSdrPage& rParentViewContactOfSdrPage, bool bFront) : ViewContactOfPageSubObject(rParentViewContactOfSdrPage), mbFront(bFront) { } ViewContactOfHelplines::~ViewContactOfHelplines() { } // Create a Object-Specific ViewObjectContact, set ViewContact and // ObjectContact. Always needs to return something. ViewObjectContact& ViewContactOfSdrPage::CreateObjectSpecificViewObjectContact(ObjectContact& rObjectContact) { ViewObjectContact* pRetval = new ViewObjectContactOfSdrPage(rObjectContact, *this); DBG_ASSERT(pRetval, "ViewContact::CreateObjectSpecificViewObjectContact() failed (!)"); return *pRetval; } ViewContactOfSdrPage::ViewContactOfSdrPage(SdrPage& rPage) : ViewContact(), mrPage(rPage), maViewContactOfPageBackground(*this), maViewContactOfPageShadow(*this), maViewContactOfPageFill(*this), maViewContactOfMasterPage(*this), maViewContactOfOuterPageBorder(*this), maViewContactOfInnerPageBorder(*this), maViewContactOfGridBack(*this, false), maViewContactOfHelplinesBack(*this, false), maViewContactOfPageHierarchy(*this), maViewContactOfGridFront(*this, true), maViewContactOfHelplinesFront(*this, true) { } ViewContactOfSdrPage::~ViewContactOfSdrPage() { } // Access to possible sub-hierarchy sal_uInt32 ViewContactOfSdrPage::GetObjectCount() const { // Fixed count of content. It contains PageBackground (Wiese), PageShadow, PageFill, // then - depending on if the page has a MasterPage - either MasterPage Hierarchy // or MPBGO. Also OuterPageBorder, InnerPageBorder and two pairs of Grid and Helplines // (for front and back) which internally are visible or not depending on the current // front/back setting for those. return 11; } ViewContact& ViewContactOfSdrPage::GetViewContact(sal_uInt32 nIndex) const { switch(nIndex) { case 0: return const_cast(maViewContactOfPageBackground); case 1: return const_cast(maViewContactOfPageShadow); case 2: return const_cast(maViewContactOfPageFill); case 3: { const SdrPage& rPage = GetSdrPage(); if(rPage.TRG_HasMasterPage()) { return rPage.TRG_GetMasterPageDescriptorViewContact(); } else { return const_cast(maViewContactOfMasterPage); } } case 4: return const_cast(maViewContactOfOuterPageBorder); case 5: return const_cast(maViewContactOfInnerPageBorder); case 6: return const_cast(maViewContactOfGridBack); case 7: return const_cast(maViewContactOfHelplinesBack); case 8: return const_cast(maViewContactOfPageHierarchy); case 9: return const_cast(maViewContactOfGridFront); case 10: case 11: return const_cast(maViewContactOfHelplinesFront); default: assert(false);return const_cast(maViewContactOfHelplinesFront); } } // React on changes of the object of this ViewContact void ViewContactOfSdrPage::ActionChanged() { // call parent ViewContact::ActionChanged(); // apply to local viewContacts, they all rely on page information. Exception // is the sub hierarchy; this will not be influenced by the change maViewContactOfPageBackground.ActionChanged(); maViewContactOfPageShadow.ActionChanged(); maViewContactOfPageFill.ActionChanged(); const SdrPage& rPage = GetSdrPage(); if(rPage.TRG_HasMasterPage()) { rPage.TRG_GetMasterPageDescriptorViewContact().ActionChanged(); } else if(rPage.IsMasterPage()) { maViewContactOfMasterPage.ActionChanged(); } maViewContactOfOuterPageBorder.ActionChanged(); maViewContactOfInnerPageBorder.ActionChanged(); maViewContactOfGridBack.ActionChanged(); maViewContactOfHelplinesBack.ActionChanged(); maViewContactOfGridFront.ActionChanged(); maViewContactOfHelplinesFront.ActionChanged(); } drawinglayer::primitive2d::Primitive2DContainer ViewContactOfSdrPage::createViewIndependentPrimitive2DSequence() const { drawinglayer::primitive2d::Primitive2DContainer xRetval; // collect all sub-sequences including sub hierarchy. xRetval.append(maViewContactOfPageBackground.getViewIndependentPrimitive2DContainer()); xRetval.append(maViewContactOfPageShadow.getViewIndependentPrimitive2DContainer()); xRetval.append(maViewContactOfPageFill.getViewIndependentPrimitive2DContainer()); const SdrPage& rPage = GetSdrPage(); if(rPage.TRG_HasMasterPage()) { xRetval.append( rPage.TRG_GetMasterPageDescriptorViewContact().getViewIndependentPrimitive2DContainer()); } else if(rPage.IsMasterPage()) { xRetval.append( maViewContactOfMasterPage.getViewIndependentPrimitive2DContainer()); } xRetval.append(maViewContactOfOuterPageBorder.getViewIndependentPrimitive2DContainer()); xRetval.append(maViewContactOfInnerPageBorder.getViewIndependentPrimitive2DContainer()); xRetval.append(maViewContactOfPageHierarchy.getViewIndependentPrimitive2DContainer()); // Only add front versions of grid and helplines since no visibility test is done, // so adding the back incarnations is not necessary. This makes the Front // visualisation the default when no visibility tests are done. // Since we have no view here, no grid and helpline definitions are available currently. The used // methods at ViewContactOfHelplines and ViewContactOfGrid return only empty sequences and // do not need to be called ATM. This may change later if grid or helpline info gets // model data (it should not). Keeping the lines commented to hold this hint. // drawinglayer::primitive2d::appendPrimitive2DSequenceToPrimitive2DSequence(xRetval, maViewContactOfGridFront.getViewIndependentPrimitive2DContainer()); // drawinglayer::primitive2d::appendPrimitive2DSequenceToPrimitive2DSequence(xRetval, maViewContactOfHelplinesFront.getViewIndependentPrimitive2DContainer()); return xRetval; } }} /* vim:set shiftwidth=4 softtabstop=4 expandtab: */