/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <svx/svxids.hrc>
#include <sfx2/request.hxx>
#include <sfx2/dispatch.hxx>
#include <sfx2/viewfrm.hxx>
#include <svx/svdview.hxx>
#include <svx/drawitem.hxx>

#include <svx/xtable.hxx>
#include <view.hxx>
#include <wrtsh.hxx>
#include <docsh.hxx>
#include <cmdid.h>

#include <drawsh.hxx>
#include <svx/svxdlg.hxx>
#include <svx/dialogs.hrc>
#include <memory>

void SwDrawShell::ExecDrawDlg(SfxRequest& rReq)
{
    SwWrtShell*     pSh     = &GetShell();
    SdrView*        pView   = pSh->GetDrawView();
    SdrModel*       pDoc    = pView->GetModel();
    bool            bChanged = pDoc->IsChanged();
    pDoc->SetChanged(false);

    SfxItemSet aNewAttr( pDoc->GetItemPool() );
    pView->GetAttributes( aNewAttr );

    GetView().NoRotate();

    switch (rReq.GetSlot())
    {
        case FN_DRAWTEXT_ATTR_DLG:
        {
            SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
            ScopedVclPtr<SfxAbstractTabDialog> pDlg(pFact->CreateTextTabDialog(rReq.GetFrameWeld(), &aNewAttr, pView));
            sal_uInt16 nResult = pDlg->Execute();

            if (nResult == RET_OK)
            {
                if (pView->AreObjectsMarked())
                {
                    pSh->StartAction();
                    pView->SetAttributes(*pDlg->GetOutputItemSet());
                    rReq.Done(*(pDlg->GetOutputItemSet()));
                    pSh->EndAction();
                }
            }
        }
        break;

        case SID_MEASURE_DLG:
        {
            bool bHasMarked = pView->AreObjectsMarked();

            SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
            ScopedVclPtr<SfxAbstractDialog> pDlg(pFact->CreateSfxDialog(rReq.GetFrameWeld(),
                                                 aNewAttr, pView, RID_SVXPAGE_MEASURE));
            if (pDlg->Execute() == RET_OK)
            {
                pSh->StartAction();
                if (bHasMarked)
                    pView->SetAttrToMarked(*pDlg->GetOutputItemSet(), false);
                else
                    pView->SetDefaultAttr(*pDlg->GetOutputItemSet(), false);
                pSh->EndAction();
            }
        }
        break;

        case SID_ATTRIBUTES_AREA:
        {
            bool bHasMarked = pView->AreObjectsMarked();

            SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
            ScopedVclPtr<AbstractSvxAreaTabDialog> pDlg(pFact->CreateSvxAreaTabDialog(rReq.GetFrameWeld(),
                                                                            &aNewAttr,
                                                                            pDoc,
                                                                            true));
            if (pDlg->Execute() == RET_OK)
            {
                pSh->StartAction();
                if (bHasMarked)
                    pView->SetAttributes(*pDlg->GetOutputItemSet());
                else
                    pView->SetDefaultAttr(*pDlg->GetOutputItemSet(), false);
                pSh->EndAction();

                static sal_uInt16 aInval[] =
                {
                    SID_ATTR_FILL_STYLE,
                    SID_ATTR_FILL_COLOR,
                    SID_ATTR_FILL_TRANSPARENCE,
                    SID_ATTR_FILL_FLOATTRANSPARENCE,
                    0
                };
                SfxBindings &rBnd = GetView().GetViewFrame()->GetBindings();
                rBnd.Invalidate(aInval);
                rBnd.Update(SID_ATTR_FILL_STYLE);
                rBnd.Update(SID_ATTR_FILL_COLOR);
                rBnd.Update(SID_ATTR_FILL_TRANSPARENCE);
                rBnd.Update(SID_ATTR_FILL_FLOATTRANSPARENCE);
            }
        }
        break;

        case SID_ATTRIBUTES_LINE:
        {
            bool bHasMarked = pView->AreObjectsMarked();

            const SdrObject* pObj = nullptr;
            const SdrMarkList& rMarkList = pView->GetMarkedObjectList();
            if( rMarkList.GetMarkCount() == 1 )
                pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();

            SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
            ScopedVclPtr<SfxAbstractTabDialog> pDlg(pFact->CreateSvxLineTabDialog(rReq.GetFrameWeld(),
                    &aNewAttr,
                pDoc,
                pObj,
                bHasMarked));
            if (pDlg->Execute() == RET_OK)
            {
                pSh->StartAction();
                if(bHasMarked)
                    pView->SetAttrToMarked(*pDlg->GetOutputItemSet(), false);
                else
                    pView->SetDefaultAttr(*pDlg->GetOutputItemSet(), false);
                pSh->EndAction();

                static sal_uInt16 aInval[] =
                {
                    SID_ATTR_LINE_STYLE,                // ( SID_SVX_START + 169 )
                    SID_ATTR_LINE_DASH,                 // ( SID_SVX_START + 170 )
                    SID_ATTR_LINE_WIDTH,                // ( SID_SVX_START + 171 )
                    SID_ATTR_LINE_COLOR,                // ( SID_SVX_START + 172 )
                    SID_ATTR_LINE_START,                // ( SID_SVX_START + 173 )
                    SID_ATTR_LINE_END,                  // ( SID_SVX_START + 174 )
                    SID_ATTR_LINE_TRANSPARENCE,         // (SID_SVX_START+1107)
                    SID_ATTR_LINE_JOINT,                // (SID_SVX_START+1110)
                    SID_ATTR_LINE_CAP,                  // (SID_SVX_START+1111)
                    0
                };

                GetView().GetViewFrame()->GetBindings().Invalidate(aInval);
            }
        }
        break;

        default:
            break;
    }

    if (pDoc->IsChanged())
        GetShell().SetModified();
    else
        if (bChanged)
            pDoc->SetChanged();
}

void SwDrawShell::ExecDrawAttrArgs(SfxRequest const & rReq)
{
    SwWrtShell* pSh   = &GetShell();
    SdrView*    pView = pSh->GetDrawView();
    const SfxItemSet* pArgs = rReq.GetArgs();
    bool        bChanged = pView->GetModel()->IsChanged();
    pView->GetModel()->SetChanged(false);

    GetView().NoRotate();

    if (pArgs)
    {
        if(pView->AreObjectsMarked())
            pView->SetAttrToMarked(*rReq.GetArgs(), false);
        else
            pView->SetDefaultAttr(*rReq.GetArgs(), false);
    }
    else
    {
        SfxDispatcher* pDis = pSh->GetView().GetViewFrame()->GetDispatcher();
        switch (rReq.GetSlot())
        {
            case SID_ATTR_FILL_STYLE:
            case SID_ATTR_FILL_COLOR:
            case SID_ATTR_FILL_GRADIENT:
            case SID_ATTR_FILL_HATCH:
            case SID_ATTR_FILL_BITMAP:
            case SID_ATTR_FILL_TRANSPARENCE:
            case SID_ATTR_FILL_FLOATTRANSPARENCE:
                pDis->Execute(SID_ATTRIBUTES_AREA);
                break;
            case SID_ATTR_LINE_STYLE:
            case SID_ATTR_LINE_DASH:
            case SID_ATTR_LINE_WIDTH:
            case SID_ATTR_LINE_COLOR:
            case SID_ATTR_LINE_TRANSPARENCE:
            case SID_ATTR_LINE_JOINT:
            case SID_ATTR_LINE_CAP:
                pDis->Execute(SID_ATTRIBUTES_LINE);
                break;
        }
    }
    if (pView->GetModel()->IsChanged())
        GetShell().SetModified();
    else
        if (bChanged)
            pView->GetModel()->SetChanged();
}

void SwDrawShell::GetDrawAttrState(SfxItemSet& rSet)
{
    SdrView* pSdrView = GetShell().GetDrawView();

    if (pSdrView->AreObjectsMarked())
    {
        bool bDisable = Disable( rSet );

        if( !bDisable )
            pSdrView->GetAttributes( rSet );
    }
    else
        rSet.Put(pSdrView->GetDefaultAttr());
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */