/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace com::sun::star; namespace drawinglayer { namespace processor3d { void DefaultProcessor3D::impRenderGradientTexturePrimitive3D(const primitive3d::GradientTexturePrimitive3D& rPrimitive, bool bTransparence) { const primitive3d::Primitive3DContainer& rSubSequence = rPrimitive.getChildren(); if(!rSubSequence.empty()) { // rescue values const bool bOldModulate(getModulate()); mbModulate = rPrimitive.getModulate(); const bool bOldFilter(getFilter()); mbFilter = rPrimitive.getFilter(); const bool bOldSimpleTextureActive(getSimpleTextureActive()); std::shared_ptr< texture::GeoTexSvx > pOldTex = bTransparence ? mpTransparenceGeoTexSvx : mpGeoTexSvx; // create texture const attribute::FillGradientAttribute& rFillGradient = rPrimitive.getGradient(); const basegfx::B2DRange aOutlineRange(0.0, 0.0, rPrimitive.getTextureSize().getX(), rPrimitive.getTextureSize().getY()); const attribute::GradientStyle aGradientStyle(rFillGradient.getStyle()); sal_uInt32 nSteps(rFillGradient.getSteps()); const basegfx::BColor& aStart(rFillGradient.getStartColor()); const basegfx::BColor& aEnd(rFillGradient.getEndColor()); const sal_uInt32 nMaxSteps(sal_uInt32((aStart.getMaximumDistance(aEnd) * 127.5) + 0.5)); std::shared_ptr< texture::GeoTexSvx > pNewTex; if(nMaxSteps) { // there IS a color distance if(nSteps == 0) { nSteps = nMaxSteps; } if(nSteps < 2) { nSteps = 2; } if(nSteps > nMaxSteps) { nSteps = nMaxSteps; } switch(aGradientStyle) { case attribute::GradientStyle::Linear: { pNewTex.reset( new texture::GeoTexSvxGradientLinear( aOutlineRange, aOutlineRange, aStart, aEnd, nSteps, rFillGradient.getBorder(), rFillGradient.getAngle())); break; } case attribute::GradientStyle::Axial: { pNewTex.reset( new texture::GeoTexSvxGradientAxial( aOutlineRange, aOutlineRange, aStart, aEnd, nSteps, rFillGradient.getBorder(), rFillGradient.getAngle())); break; } case attribute::GradientStyle::Radial: { pNewTex.reset( new texture::GeoTexSvxGradientRadial( aOutlineRange, aStart, aEnd, nSteps, rFillGradient.getBorder(), rFillGradient.getOffsetX(), rFillGradient.getOffsetY())); break; } case attribute::GradientStyle::Elliptical: { pNewTex.reset( new texture::GeoTexSvxGradientElliptical( aOutlineRange, aStart, aEnd, nSteps, rFillGradient.getBorder(), rFillGradient.getOffsetX(), rFillGradient.getOffsetY(), rFillGradient.getAngle())); break; } case attribute::GradientStyle::Square: { pNewTex.reset( new texture::GeoTexSvxGradientSquare( aOutlineRange, aStart, aEnd, nSteps, rFillGradient.getBorder(), rFillGradient.getOffsetX(), rFillGradient.getOffsetY(), rFillGradient.getAngle())); break; } case attribute::GradientStyle::Rect: { pNewTex.reset( new texture::GeoTexSvxGradientRect( aOutlineRange, aStart, aEnd, nSteps, rFillGradient.getBorder(), rFillGradient.getOffsetX(), rFillGradient.getOffsetY(), rFillGradient.getAngle())); break; } } mbSimpleTextureActive = false; } else { // no color distance -> same color, use simple texture pNewTex.reset(new texture::GeoTexSvxMono(aStart, 1.0 - aStart.luminance())); mbSimpleTextureActive = true; } // set created texture if(bTransparence) { mpTransparenceGeoTexSvx = pNewTex; } else { mpGeoTexSvx = pNewTex; } // process sub-list process(rSubSequence); // restore values mbModulate = bOldModulate; mbFilter = bOldFilter; mbSimpleTextureActive = bOldSimpleTextureActive; if(bTransparence) { mpTransparenceGeoTexSvx = pOldTex; } else { mpGeoTexSvx = pOldTex; } } } void DefaultProcessor3D::impRenderHatchTexturePrimitive3D(const primitive3d::HatchTexturePrimitive3D& rPrimitive) { const primitive3d::Primitive3DContainer& rSubSequence = rPrimitive.getChildren(); if(!rSubSequence.empty()) { // rescue values const bool bOldModulate(getModulate()); mbModulate = rPrimitive.getModulate(); const bool bOldFilter(getFilter()); mbFilter = rPrimitive.getFilter(); std::shared_ptr< texture::GeoTexSvx > pOldTex = mpGeoTexSvx; // calculate logic pixel size in object coordinates. Create transformation view // to object by inverting ObjectToView basegfx::B3DHomMatrix aInvObjectToView(getViewInformation3D().getObjectToView()); aInvObjectToView.invert(); // back-project discrete coordinates to object coordinates and extract // maximum distance const basegfx::B3DPoint aZero(aInvObjectToView * basegfx::B3DPoint(0.0, 0.0, 0.0)); const basegfx::B3DPoint aOne(aInvObjectToView * basegfx::B3DPoint(1.0, 1.0, 1.0)); const basegfx::B3DVector aLogicPixel(aOne - aZero); double fLogicPixelSizeWorld(std::max(std::max(fabs(aLogicPixel.getX()), fabs(aLogicPixel.getY())), fabs(aLogicPixel.getZ()))); // calculate logic pixel size in texture coordinates const double fLogicTexSizeX(fLogicPixelSizeWorld / rPrimitive.getTextureSize().getX()); const double fLogicTexSizeY(fLogicPixelSizeWorld / rPrimitive.getTextureSize().getY()); const double fLogicTexSize(std::max(fLogicTexSizeX, fLogicTexSizeY)); // create texture and set mpGeoTexSvx.reset(new texture::GeoTexSvxMultiHatch(rPrimitive, fLogicTexSize)); // process sub-list process(rSubSequence); // restore values mbModulate = bOldModulate; mbFilter = bOldFilter; mpGeoTexSvx = pOldTex; } } void DefaultProcessor3D::impRenderBitmapTexturePrimitive3D(const primitive3d::BitmapTexturePrimitive3D& rPrimitive) { const primitive3d::Primitive3DContainer& rSubSequence = rPrimitive.getChildren(); if(!rSubSequence.empty()) { // rescue values const bool bOldModulate(getModulate()); mbModulate = rPrimitive.getModulate(); const bool bOldFilter(getFilter()); mbFilter = rPrimitive.getFilter(); std::shared_ptr< texture::GeoTexSvx > pOldTex = mpGeoTexSvx; // create texture const attribute::FillGraphicAttribute& rFillGraphicAttribute = rPrimitive.getFillGraphicAttribute(); // #121194# For 3D texture we will use the BitmapRex representation const BitmapEx aBitmapEx(rFillGraphicAttribute.getGraphic().GetBitmapEx()); // create range scaled by texture size basegfx::B2DRange aGraphicRange(rFillGraphicAttribute.getGraphicRange()); aGraphicRange.transform( basegfx::utils::createScaleB2DHomMatrix( rPrimitive.getTextureSize())); if(rFillGraphicAttribute.getTiling()) { mpGeoTexSvx.reset( new texture::GeoTexSvxBitmapExTiled( aBitmapEx, aGraphicRange, rFillGraphicAttribute.getOffsetX(), rFillGraphicAttribute.getOffsetY())); } else { mpGeoTexSvx.reset( new texture::GeoTexSvxBitmapEx( aBitmapEx, aGraphicRange)); } // process sub-list process(rSubSequence); // restore values mbModulate = bOldModulate; mbFilter = bOldFilter; mpGeoTexSvx = pOldTex; } } void DefaultProcessor3D::impRenderModifiedColorPrimitive3D(const primitive3d::ModifiedColorPrimitive3D& rModifiedCandidate) { const primitive3d::Primitive3DContainer& rSubSequence = rModifiedCandidate.getChildren(); if(!rSubSequence.empty()) { // put modifier on stack maBColorModifierStack.push(rModifiedCandidate.getColorModifier()); // process sub-list process(rModifiedCandidate.getChildren()); // remove modifier from stack maBColorModifierStack.pop(); } } void DefaultProcessor3D::impRenderPolygonHairlinePrimitive3D(const primitive3d::PolygonHairlinePrimitive3D& rPrimitive) const { basegfx::B3DPolygon aHairline(rPrimitive.getB3DPolygon()); if(aHairline.count()) { // hairlines need no extra data, clear it aHairline.clearTextureCoordinates(); aHairline.clearNormals(); aHairline.clearBColors(); // transform to device coordinates (-1.0 .. 1.0) and check for visibility aHairline.transform(getViewInformation3D().getObjectToView()); const basegfx::B3DRange a3DRange(basegfx::utils::getRange(aHairline)); const basegfx::B2DRange a2DRange(a3DRange.getMinX(), a3DRange.getMinY(), a3DRange.getMaxX(), a3DRange.getMaxY()); if(a2DRange.overlaps(maRasterRange)) { const attribute::MaterialAttribute3D aMaterial(maBColorModifierStack.getModifiedColor(rPrimitive.getBColor())); rasterconvertB3DPolygon(aMaterial, aHairline); } } } void DefaultProcessor3D::impRenderPolyPolygonMaterialPrimitive3D(const primitive3d::PolyPolygonMaterialPrimitive3D& rPrimitive) const { basegfx::B3DPolyPolygon aFill(rPrimitive.getB3DPolyPolygon()); basegfx::BColor aObjectColor(rPrimitive.getMaterial().getColor()); bool bPaintIt(aFill.count()); // #i98295# get ShadeMode. Correct early when only flat is possible due to missing normals const css::drawing::ShadeMode aShadeMode( aFill.areNormalsUsed() ? getSdrSceneAttribute().getShadeMode() : css::drawing::ShadeMode_FLAT); if(bPaintIt) { // get rid of texture coordinates if there is no texture if(aFill.areTextureCoordinatesUsed() && !getGeoTexSvx().get() && !getTransparenceGeoTexSvx().get()) { aFill.clearTextureCoordinates(); } // #i98295# get rid of normals and color early when not needed if(css::drawing::ShadeMode_FLAT == aShadeMode) { aFill.clearNormals(); aFill.clearBColors(); } // transform to device coordinates (-1.0 .. 1.0) and check for visibility aFill.transform(getViewInformation3D().getObjectToView()); const basegfx::B3DRange a3DRange(basegfx::utils::getRange(aFill)); const basegfx::B2DRange a2DRange(a3DRange.getMinX(), a3DRange.getMinY(), a3DRange.getMaxX(), a3DRange.getMaxY()); bPaintIt = a2DRange.overlaps(maRasterRange); } // check if it shall be painted regarding hiding of normals (backface culling) if(bPaintIt && !rPrimitive.getDoubleSided()) { // get plane normal of polygon in view coordinates (with ZBuffer values), // left-handed coordinate system const basegfx::B3DVector aPlaneNormal(aFill.getB3DPolygon(0).getNormal()); if(aPlaneNormal.getZ() > 0.0) { bPaintIt = false; } } if(bPaintIt) { // prepare ObjectToEye in NormalTransform basegfx::B3DHomMatrix aNormalTransform(getViewInformation3D().getOrientation() * getViewInformation3D().getObjectTransformation()); if(getSdrSceneAttribute().getTwoSidedLighting()) { // get plane normal of polygon in view coordinates (with ZBuffer values), // left-handed coordinate system const basegfx::B3DVector aPlaneNormal(aFill.getB3DPolygon(0).getNormal()); if(aPlaneNormal.getZ() > 0.0) { // mirror normals aNormalTransform.scale(-1.0, -1.0, -1.0); } } switch(aShadeMode) { case css::drawing::ShadeMode_PHONG: { // phong shading. Transform normals to eye coor aFill.transformNormals(aNormalTransform); break; } case css::drawing::ShadeMode_SMOOTH: { // gouraud shading. Transform normals to eye coor aFill.transformNormals(aNormalTransform); // prepare color model parameters, evtl. use blend color const basegfx::BColor aColor(getModulate() ? basegfx::BColor(1.0, 1.0, 1.0) : rPrimitive.getMaterial().getColor()); const basegfx::BColor& rSpecular(rPrimitive.getMaterial().getSpecular()); const basegfx::BColor& rEmission(rPrimitive.getMaterial().getEmission()); const sal_uInt16 nSpecularIntensity(rPrimitive.getMaterial().getSpecularIntensity()); // solve color model for each normal vector, set colors at points. Clear normals. for(sal_uInt32 a(0); a < aFill.count(); a++) { basegfx::B3DPolygon aPartFill(aFill.getB3DPolygon(a)); for(sal_uInt32 b(0); b < aPartFill.count(); b++) { // solve color model. Transform normal to eye coor const basegfx::B3DVector aNormal(aPartFill.getNormal(b)); const basegfx::BColor aSolvedColor(getSdrLightingAttribute().solveColorModel(aNormal, aColor, rSpecular, rEmission, nSpecularIntensity)); aPartFill.setBColor(b, aSolvedColor); } // clear normals on this part polygon and write it back aPartFill.clearNormals(); aFill.setB3DPolygon(a, aPartFill); } break; } case css::drawing::ShadeMode_FLAT: { // flat shading. Get plane vector in eye coordinates const basegfx::B3DVector aPlaneEyeNormal(aNormalTransform * rPrimitive.getB3DPolyPolygon().getB3DPolygon(0).getNormal()); // prepare color model parameters, evtl. use blend color const basegfx::BColor aColor(getModulate() ? basegfx::BColor(1.0, 1.0, 1.0) : rPrimitive.getMaterial().getColor()); const basegfx::BColor& rSpecular(rPrimitive.getMaterial().getSpecular()); const basegfx::BColor& rEmission(rPrimitive.getMaterial().getEmission()); const sal_uInt16 nSpecularIntensity(rPrimitive.getMaterial().getSpecularIntensity()); // solve color model for plane vector and use that color for whole plane aObjectColor = getSdrLightingAttribute().solveColorModel(aPlaneEyeNormal, aColor, rSpecular, rEmission, nSpecularIntensity); break; } default: // case css::drawing::ShadeMode_DRAFT: { // draft, just use object color which is already set. Delete all other infos aFill.clearNormals(); aFill.clearBColors(); break; } } // draw it to ZBuffer const attribute::MaterialAttribute3D aMaterial( maBColorModifierStack.getModifiedColor(aObjectColor), rPrimitive.getMaterial().getSpecular(), rPrimitive.getMaterial().getEmission(), rPrimitive.getMaterial().getSpecularIntensity()); rasterconvertB3DPolyPolygon(aMaterial, aFill); } } void DefaultProcessor3D::impRenderTransformPrimitive3D(const primitive3d::TransformPrimitive3D& rTransformCandidate) { // transform group. Remember current transformations const geometry::ViewInformation3D aLastViewInformation3D(getViewInformation3D()); // create new transformation; add new object transform from right side const geometry::ViewInformation3D aNewViewInformation3D( aLastViewInformation3D.getObjectTransformation() * rTransformCandidate.getTransformation(), aLastViewInformation3D.getOrientation(), aLastViewInformation3D.getProjection(), aLastViewInformation3D.getDeviceToView(), aLastViewInformation3D.getViewTime(), aLastViewInformation3D.getExtendedInformationSequence()); updateViewInformation(aNewViewInformation3D); // let break down recursively process(rTransformCandidate.getChildren()); // restore transformations updateViewInformation(aLastViewInformation3D); } void DefaultProcessor3D::processBasePrimitive3D(const primitive3d::BasePrimitive3D& rBasePrimitive) { // it is a BasePrimitive3D implementation, use getPrimitive3DID() call for switch switch(rBasePrimitive.getPrimitive3DID()) { case PRIMITIVE3D_ID_GRADIENTTEXTUREPRIMITIVE3D : { // GradientTexturePrimitive3D const primitive3d::GradientTexturePrimitive3D& rPrimitive = static_cast< const primitive3d::GradientTexturePrimitive3D& >(rBasePrimitive); impRenderGradientTexturePrimitive3D(rPrimitive, false); break; } case PRIMITIVE3D_ID_HATCHTEXTUREPRIMITIVE3D : { // hatchTexturePrimitive3D const primitive3d::HatchTexturePrimitive3D& rPrimitive = static_cast< const primitive3d::HatchTexturePrimitive3D& >(rBasePrimitive); impRenderHatchTexturePrimitive3D(rPrimitive); break; } case PRIMITIVE3D_ID_BITMAPTEXTUREPRIMITIVE3D : { // BitmapTexturePrimitive3D const primitive3d::BitmapTexturePrimitive3D& rPrimitive = static_cast< const primitive3d::BitmapTexturePrimitive3D& >(rBasePrimitive); impRenderBitmapTexturePrimitive3D(rPrimitive); break; } case PRIMITIVE3D_ID_TRANSPARENCETEXTUREPRIMITIVE3D : { // TransparenceTexturePrimitive3D const primitive3d::TransparenceTexturePrimitive3D& rPrimitive = static_cast< const primitive3d::TransparenceTexturePrimitive3D& >(rBasePrimitive); mnTransparenceCounter++; impRenderGradientTexturePrimitive3D(rPrimitive, true); mnTransparenceCounter--; break; } case PRIMITIVE3D_ID_MODIFIEDCOLORPRIMITIVE3D : { // ModifiedColorPrimitive3D // Force output to unified color. const primitive3d::ModifiedColorPrimitive3D& rPrimitive = static_cast< const primitive3d::ModifiedColorPrimitive3D& >(rBasePrimitive); impRenderModifiedColorPrimitive3D(rPrimitive); break; } case PRIMITIVE3D_ID_POLYGONHAIRLINEPRIMITIVE3D : { // directdraw of PolygonHairlinePrimitive3D const primitive3d::PolygonHairlinePrimitive3D& rPrimitive = static_cast< const primitive3d::PolygonHairlinePrimitive3D& >(rBasePrimitive); impRenderPolygonHairlinePrimitive3D(rPrimitive); break; } case PRIMITIVE3D_ID_POLYPOLYGONMATERIALPRIMITIVE3D : { // directdraw of PolyPolygonMaterialPrimitive3D const primitive3d::PolyPolygonMaterialPrimitive3D& rPrimitive = static_cast< const primitive3d::PolyPolygonMaterialPrimitive3D& >(rBasePrimitive); impRenderPolyPolygonMaterialPrimitive3D(rPrimitive); break; } case PRIMITIVE3D_ID_TRANSFORMPRIMITIVE3D : { // transform group (TransformPrimitive3D) impRenderTransformPrimitive3D(static_cast< const primitive3d::TransformPrimitive3D& >(rBasePrimitive)); break; } default: { // process recursively process(rBasePrimitive.get3DDecomposition(getViewInformation3D())); break; } } } DefaultProcessor3D::DefaultProcessor3D( const geometry::ViewInformation3D& rViewInformation, const attribute::SdrSceneAttribute& rSdrSceneAttribute, const attribute::SdrLightingAttribute& rSdrLightingAttribute) : BaseProcessor3D(rViewInformation), mrSdrSceneAttribute(rSdrSceneAttribute), mrSdrLightingAttribute(rSdrLightingAttribute), maRasterRange(), maBColorModifierStack(), mpGeoTexSvx(), mpTransparenceGeoTexSvx(), maDrawinglayerOpt(), mnTransparenceCounter(0), mbModulate(false), mbFilter(false), mbSimpleTextureActive(false) { // a derivation has to set maRasterRange which is used in the basic render methods. // Setting to default here ([0.0 .. 1.0] in X,Y) to avoid problems maRasterRange.expand(basegfx::B2DTuple(0.0, 0.0)); maRasterRange.expand(basegfx::B2DTuple(1.0, 1.0)); } DefaultProcessor3D::~DefaultProcessor3D() { } } // end of namespace processor3d } // end of namespace drawinglayer /* vim:set shiftwidth=4 softtabstop=4 expandtab: */