#!/bin/bash
#
# Copyright (C) 2018 Advanced Micro Devices, Inc. All Rights Reserved.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
# OTHER DEALINGS IN THE SOFTWARE.
#
#

# See if we can find the SHARE/BIN dirs in their expected locations
CWD="${BASH_SOURCE%/*}"
while read candidate; do
    if [ -e "$candidate/kfdtest.exclude" ]; then
        source "$candidate/kfdtest.exclude"
        break
    fi
done <<EOF
$KFDTEST_SHARE_DIR
$CWD
$CWD/../share/kfdtest
/opt/rocm/share/kfdtest
EOF

# Keep these checks until automation starts using the package install
if [ -z "${FILTER[core]}" ]; then
    if [ -e "$CWD/../bin/kfdtest/kfdtest.exclude" ]; then
        source "$CWD/../bin/kfdtest/kfdtest.exclude"
    elif [ -e "$CWD/../../share/kfdtest.exclude" ]; then
        source "$CWD/../../share/kfdtest.exclude"
    fi
fi

# This filter will always exist if we sourced a valid kfdtest.exclude
if [ -z "${FILTER[core]}" ]; then
    echo "Unable to locate kfdtest.exclude."
    echo "Please set KFDTEST_SHARE_DIR or ensure that kfdtest.exclude is present inside $CWD, $CWD/../share/kfdtest or /opt/rocm/share/kfdtest"
    exit 1
fi

# Using "which" produces different results in different
# OSes so use command -v instead. It returns "" if the
# command isn't in the PATH
if [ -z "$(command -v kfdtest)" ]; then
    if [ -z "$BIN_DIR" ]; then
        if [ -e "${0%/*}/kfdtest" ]; then
            BIN_DIR="${0%/*}"
        else
            # The default location
            BIN_DIR="/opt/rocm/bin"
        fi
    fi
    if [ -e "$BIN_DIR/kfdtest" ]; then
        KFDTEST="$BIN_DIR/kfdtest"
    else
        echo "Unable to locate kfdtest."
        echo "Please set BIN_DIR, ensure that kfdtest is in $PATH, or ensure that kfdtest is present inside ${0%/*} or /opt/rocm/bin"
        exit 1
    fi
else
    KFDTEST="kfdtest"
fi

PLATFORM=""
GDB=""
NODE=""
FORCE_HIGH=""
RUN_IN_DOCKER=""

printUsage() {
    echo
    echo "Usage: $(basename $0) [options ...] [gtest arguments]"
    echo
    echo "Options:"
    echo "  -p <platform> , --platform <platform>    Only run tests that"\
                               "pass on the specified platform. Usually you"\
                               "don't need this option"
    echo "  -g            , --gdb                    Run in debugger"
    echo "  -n            , --node                   NodeId to test. If"\
                               "not specified test will be run on all nodes"
    echo "  -l            , --list                   List available nodes"
    echo "  --high                                   Force clocks to high for test execution"
    echo "  -d            , --docker                 Run in docker container"
    echo "  -h            , --help                   Prints this help"
    echo
    echo "Gtest arguments will be forwarded to the app"
    echo
    echo "Valid platform options: core_sws, core, polaris10, vega10, vega20, pm, all, and so on"
    echo "'all' option runs all tests"

    return 0
}
# Print gtest_filter for the given Platform
#    param - Platform.
getFilter() {
# For regular platforms such as vega10, this will automatically generate
# the valid variable BLACKLIST based on the variable platform.
    local platform=$1;

    case "$platform" in
        all ) gtestFilter="" ;;
        * )
            if [ -z "${FILTER[$platform]}" ]; then
                echo "Unsupported platform $platform. Exiting"
                exit 1
            fi

            gtestFilter="--gtest_filter=${FILTER[$platform]}"
            ;;
    esac
}

TOPOLOGY_SYSFS_DIR=/sys/devices/virtual/kfd/kfd/topology/nodes

# Prints list of HSA Nodes. HSA Nodes are identified from sysfs KFD topology. The nodes
# should have valid SIMD count
getHsaNodes() {
    for i in $(find $TOPOLOGY_SYSFS_DIR  -maxdepth 1 -mindepth 1 -type d); do
        simdcount=$(cat $i/properties | grep simd_count | awk '{print $2}')
        if [ $simdcount != 0 ]; then
            hsaNodeList+="$(basename $i) "
        fi
    done
    echo "$hsaNodeList"
}


# Prints GPU Name for the given Node ID
#   param - Node ID
getNodeName() {
    local nodeId=$1; shift;
    local gpuName=$(cat $TOPOLOGY_SYSFS_DIR/$nodeId/name)
    if [ "$gpuName" == "raven" ]; then
      local CpuCoresCount=$(cat $TOPOLOGY_SYSFS_DIR/$nodeId/properties | grep cpu_cores_count | awk '{print $2}')
      local SimdCount=$(cat $TOPOLOGY_SYSFS_DIR/$nodeId/properties | grep simd_count | awk '{print $2}')
      if [ "$CpuCoresCount" -eq 0 ] && [ "$SimdCount" -gt 0 ]; then
	gpuName="raven_dgpuFallback"
      fi
    fi
    echo "$gpuName"
}

# Run KfdTest independently. Two global variables set by command-line
# will influence the tests as indicated below
#   PLATFORM - If set all tests will run with this platform filter
#   NODE - If set tests will be run only on this NODE, else it will be
#           run on all available HSA Nodes
runKfdTest() {
    if [ "$RUN_IN_DOCKER" == "true" ]; then
        if [ `sudo systemctl is-active docker` != "active" ]; then
            echo "docker isn't active, install and setup docker first!!!!"
            exit 0
        fi
        PKG_ROOT="$(getPackageRoot)"
    fi

    if [ "$NODE" == "" ]; then
        hsaNodes=$(getHsaNodes)

        if [ "$hsaNodes" == "" ]; then
            echo "No GPU found in the system."
            exit 1
        fi
    else
        hsaNodes=$NODE
    fi

    for hsaNode in $hsaNodes; do
        nodeName=$(getNodeName $hsaNode)
        if [ "$PLATFORM" != "" ] && [ "$PLATFORM" != "$nodeName" ]; then
            echo "WARNING: Actual ASIC $nodeName treated as $PLATFORM"
            nodeName="$PLATFORM"
        fi

        getFilter $nodeName

        if [ "$RUN_IN_DOCKER" == "true" ]; then
            if [ "$NODE" == "" ]; then
                DEVICE_NODE="/dev/dri"
            else
                RENDER_NODE=$(($hsaNode + 127))
                DEVICE_NODE="/dev/dri/renderD${RENDER_NODE}"
            fi

            echo "Starting testing node $hsaNode ($nodeName) in docker container"
            sudo docker run -it --name kfdtest_docker --user="jenkins" --network=host \
            --device=/dev/kfd --device=${DEVICE_NODE} --group-add video --cap-add=SYS_PTRACE \
            --security-opt seccomp=unconfined -v $PKG_ROOT:/home/jenkins/rocm \
            compute-artifactory.amd.com:5000/yuho/tianli-ubuntu1604-kfdtest:01 \
            /home/jenkins/rocm/utils/run_kfdtest.sh -n $hsaNode $gtestFilter $GTEST_ARGS
            if [ "$?" = "0" ]; then
                echo "Finished node $hsaNode ($nodeName) successfully in docker container"
            else
                echo "Testing failed for node $hsaNode ($nodeName) in docker container"
            fi
            sudo docker rm kfdtest_docker
        else
            echo ""
            echo "++++ Starting testing node $hsaNode ($nodeName) ++++"
            $GDB $KFDTEST "--node=$hsaNode" $gtestFilter $GTEST_ARGS
            echo "---- Finished testing node $hsaNode ($nodeName) ----"
        fi


    done

}

# Prints number of GPUs present in the system
getGPUCount() {
    gNodes=$(getHsaNodes)
    gNodes=( $gNodes )
    gpuCount=${#gNodes[@]}
    echo "$gpuCount"
}

while [ "$1" != "" ]; do
    case "$1" in
        -p  | --platform )
            shift 1; PLATFORM=$1 ;;
        -g  | --gdb )
            GDB="gdb --args" ;;
        -l  | --list )
            printGpuNodelist; exit 0 ;;
        -n  | --node )
            shift 1; NODE=$1 ;;
        --high)
            FORCE_HIGH="true" ;;
        -d  | --docker )
            RUN_IN_DOCKER="true" ;;
        -h  | --help )
            printUsage; exit 0 ;;
        *)
            GTEST_ARGS=$@; break;;
    esac
    shift 1
done

# If the SMI is missing, just report and continue
SMI="$(find /opt/rocm* -type l -name rocm-smi | tail -1)"
if [ "$FORCE_HIGH" == "true" ]; then
    if [ -e "$SMI" ]; then
        OLDPERF=$($SMI -p | awk '/Performance Level:/ {print $NF; exit}')
	$($SMI --setperflevel high &> /dev/null)
	if [ $? != 0 ]; then
            echo "SMI failed to set perf level"
	    OLDPERF=""
        fi
    else
        echo "Unable to set clocks to high, cannot find rocm-smi"
    fi
fi

# Set HSA_DEBUG env to run KFDMemoryTest.PtraceAccessInvisibleVram
export HSA_DEBUG=1
runKfdTest

# OLDPERF is only set if FORCE_HIGH and SMI both exist
if [ -n "$OLDPERF" ]; then
    $SMI --setperflevel $OLDPERF &> /dev/null
fi