/* LIBGIMP - The GIMP Library * Copyright (C) 1995-2003 Peter Mattis and Spencer Kimball * * gimpdrawabletransform_pdb.c * * This library is free software: you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 3 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library. If not, see * . */ /* NOTE: This file is auto-generated by pdbgen.pl */ #include "config.h" #include "gimp.h" #undef GIMP_DISABLE_DEPRECATED #undef __GIMP_DRAWABLE_TRANSFORM_PDB_H__ #include "gimpdrawabletransform_pdb.h" /** * SECTION: gimpdrawabletransform * @title: gimpdrawabletransform * @short_description: Functions to perform transformatrions on drawables. * * Functions to perform transformatrions on drawables. **/ /** * gimp_drawable_transform_flip_simple: * @drawable_ID: The affected drawable. * @flip_type: Type of flip. * @auto_center: Whether to automatically position the axis in the selection center. * @axis: coord. of flip axis. * @clip_result: Whether to clip results. * * Deprecated: Use gimp_item_transform_flip_simple() instead. * * Returns: The flipped drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_flip_simple (gint32 drawable_ID, GimpOrientationType flip_type, gboolean auto_center, gdouble axis, gboolean clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-flip-simple", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_INT32, flip_type, GIMP_PDB_INT32, auto_center, GIMP_PDB_FLOAT, axis, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_flip: * @drawable_ID: The affected drawable. * @x0: horz. coord. of one end of axis. * @y0: vert. coord. of one end of axis. * @x1: horz. coord. of other end of axis. * @y1: vert. coord. of other end of axis. * @transform_direction: Direction of transformation. * @interpolation: Type of interpolation. * @supersample: This parameter is ignored, supersampling is performed based on the interpolation type. * @recursion_level: Maximum recursion level used for supersampling (3 is a nice value). * @clip_result: Whether to clip results. * * Deprecated: Use gimp_item_transform_flip() instead. * * Returns: The flipped drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_flip (gint32 drawable_ID, gdouble x0, gdouble y0, gdouble x1, gdouble y1, GimpTransformDirection transform_direction, GimpInterpolationType interpolation, gboolean supersample, gint recursion_level, gboolean clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-flip", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, x0, GIMP_PDB_FLOAT, y0, GIMP_PDB_FLOAT, x1, GIMP_PDB_FLOAT, y1, GIMP_PDB_INT32, transform_direction, GIMP_PDB_INT32, interpolation, GIMP_PDB_INT32, supersample, GIMP_PDB_INT32, recursion_level, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_flip_default: * @drawable_ID: The affected drawable. * @x0: horz. coord. of one end of axis. * @y0: vert. coord. of one end of axis. * @x1: horz. coord. of other end of axis. * @y1: vert. coord. of other end of axis. * @interpolate: Whether to use interpolation and supersampling. * @clip_result: Whether to clip results. * * Deprecated: Use gimp_item_transform_flip() instead. * * Returns: The flipped drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_flip_default (gint32 drawable_ID, gdouble x0, gdouble y0, gdouble x1, gdouble y1, gboolean interpolate, gboolean clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-flip-default", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, x0, GIMP_PDB_FLOAT, y0, GIMP_PDB_FLOAT, x1, GIMP_PDB_FLOAT, y1, GIMP_PDB_INT32, interpolate, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_perspective: * @drawable_ID: The affected drawable. * @x0: The new x coordinate of upper-left corner of original bounding box. * @y0: The new y coordinate of upper-left corner of original bounding box. * @x1: The new x coordinate of upper-right corner of original bounding box. * @y1: The new y coordinate of upper-right corner of original bounding box. * @x2: The new x coordinate of lower-left corner of original bounding box. * @y2: The new y coordinate of lower-left corner of original bounding box. * @x3: The new x coordinate of lower-right corner of original bounding box. * @y3: The new y coordinate of lower-right corner of original bounding box. * @transform_direction: Direction of transformation. * @interpolation: Type of interpolation. * @supersample: This parameter is ignored, supersampling is performed based on the interpolation type. * @recursion_level: Maximum recursion level used for supersampling (3 is a nice value). * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_perspective() instead. * * Returns: The newly mapped drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_perspective (gint32 drawable_ID, gdouble x0, gdouble y0, gdouble x1, gdouble y1, gdouble x2, gdouble y2, gdouble x3, gdouble y3, GimpTransformDirection transform_direction, GimpInterpolationType interpolation, gboolean supersample, gint recursion_level, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-perspective", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, x0, GIMP_PDB_FLOAT, y0, GIMP_PDB_FLOAT, x1, GIMP_PDB_FLOAT, y1, GIMP_PDB_FLOAT, x2, GIMP_PDB_FLOAT, y2, GIMP_PDB_FLOAT, x3, GIMP_PDB_FLOAT, y3, GIMP_PDB_INT32, transform_direction, GIMP_PDB_INT32, interpolation, GIMP_PDB_INT32, supersample, GIMP_PDB_INT32, recursion_level, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_perspective_default: * @drawable_ID: The affected drawable. * @x0: The new x coordinate of upper-left corner of original bounding box. * @y0: The new y coordinate of upper-left corner of original bounding box. * @x1: The new x coordinate of upper-right corner of original bounding box. * @y1: The new y coordinate of upper-right corner of original bounding box. * @x2: The new x coordinate of lower-left corner of original bounding box. * @y2: The new y coordinate of lower-left corner of original bounding box. * @x3: The new x coordinate of lower-right corner of original bounding box. * @y3: The new y coordinate of lower-right corner of original bounding box. * @interpolate: Whether to use interpolation and supersampling. * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_perspective() instead. * * Returns: The newly mapped drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_perspective_default (gint32 drawable_ID, gdouble x0, gdouble y0, gdouble x1, gdouble y1, gdouble x2, gdouble y2, gdouble x3, gdouble y3, gboolean interpolate, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-perspective-default", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, x0, GIMP_PDB_FLOAT, y0, GIMP_PDB_FLOAT, x1, GIMP_PDB_FLOAT, y1, GIMP_PDB_FLOAT, x2, GIMP_PDB_FLOAT, y2, GIMP_PDB_FLOAT, x3, GIMP_PDB_FLOAT, y3, GIMP_PDB_INT32, interpolate, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_rotate_simple: * @drawable_ID: The affected drawable. * @rotate_type: Type of rotation. * @auto_center: Whether to automatically rotate around the selection center. * @center_x: The hor. coordinate of the center of rotation. * @center_y: The vert. coordinate of the center of rotation. * @clip_result: Whether to clip results. * * Deprecated: Use gimp_item_transform_rotate_simple() instead. * * Returns: The rotated drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_rotate_simple (gint32 drawable_ID, GimpRotationType rotate_type, gboolean auto_center, gint center_x, gint center_y, gboolean clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-rotate-simple", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_INT32, rotate_type, GIMP_PDB_INT32, auto_center, GIMP_PDB_INT32, center_x, GIMP_PDB_INT32, center_y, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_rotate: * @drawable_ID: The affected drawable. * @angle: The angle of rotation (radians). * @auto_center: Whether to automatically rotate around the selection center. * @center_x: The hor. coordinate of the center of rotation. * @center_y: The vert. coordinate of the center of rotation. * @transform_direction: Direction of transformation. * @interpolation: Type of interpolation. * @supersample: This parameter is ignored, supersampling is performed based on the interpolation type. * @recursion_level: Maximum recursion level used for supersampling (3 is a nice value). * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_rotate() instead. * * Returns: The rotated drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_rotate (gint32 drawable_ID, gdouble angle, gboolean auto_center, gint center_x, gint center_y, GimpTransformDirection transform_direction, GimpInterpolationType interpolation, gboolean supersample, gint recursion_level, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-rotate", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, angle, GIMP_PDB_INT32, auto_center, GIMP_PDB_INT32, center_x, GIMP_PDB_INT32, center_y, GIMP_PDB_INT32, transform_direction, GIMP_PDB_INT32, interpolation, GIMP_PDB_INT32, supersample, GIMP_PDB_INT32, recursion_level, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_rotate_default: * @drawable_ID: The affected drawable. * @angle: The angle of rotation (radians). * @auto_center: Whether to automatically rotate around the selection center. * @center_x: The hor. coordinate of the center of rotation. * @center_y: The vert. coordinate of the center of rotation. * @interpolate: Whether to use interpolation and supersampling. * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_rotate() instead. * * Returns: The rotated drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_rotate_default (gint32 drawable_ID, gdouble angle, gboolean auto_center, gint center_x, gint center_y, gboolean interpolate, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-rotate-default", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, angle, GIMP_PDB_INT32, auto_center, GIMP_PDB_INT32, center_x, GIMP_PDB_INT32, center_y, GIMP_PDB_INT32, interpolate, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_scale: * @drawable_ID: The affected drawable. * @x0: The new x coordinate of the upper-left corner of the scaled region. * @y0: The new y coordinate of the upper-left corner of the scaled region. * @x1: The new x coordinate of the lower-right corner of the scaled region. * @y1: The new y coordinate of the lower-right corner of the scaled region. * @transform_direction: Direction of transformation. * @interpolation: Type of interpolation. * @supersample: This parameter is ignored, supersampling is performed based on the interpolation type. * @recursion_level: Maximum recursion level used for supersampling (3 is a nice value). * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_scale() instead. * * Returns: The scaled drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_scale (gint32 drawable_ID, gdouble x0, gdouble y0, gdouble x1, gdouble y1, GimpTransformDirection transform_direction, GimpInterpolationType interpolation, gboolean supersample, gint recursion_level, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-scale", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, x0, GIMP_PDB_FLOAT, y0, GIMP_PDB_FLOAT, x1, GIMP_PDB_FLOAT, y1, GIMP_PDB_INT32, transform_direction, GIMP_PDB_INT32, interpolation, GIMP_PDB_INT32, supersample, GIMP_PDB_INT32, recursion_level, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_scale_default: * @drawable_ID: The affected drawable. * @x0: The new x coordinate of the upper-left corner of the scaled region. * @y0: The new y coordinate of the upper-left corner of the scaled region. * @x1: The new x coordinate of the lower-right corner of the scaled region. * @y1: The new y coordinate of the lower-right corner of the scaled region. * @interpolate: Whether to use interpolation and supersampling. * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_scale() instead. * * Returns: The scaled drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_scale_default (gint32 drawable_ID, gdouble x0, gdouble y0, gdouble x1, gdouble y1, gboolean interpolate, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-scale-default", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, x0, GIMP_PDB_FLOAT, y0, GIMP_PDB_FLOAT, x1, GIMP_PDB_FLOAT, y1, GIMP_PDB_INT32, interpolate, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_shear: * @drawable_ID: The affected drawable. * @shear_type: Type of shear. * @magnitude: The magnitude of the shear. * @transform_direction: Direction of transformation. * @interpolation: Type of interpolation. * @supersample: This parameter is ignored, supersampling is performed based on the interpolation type. * @recursion_level: Maximum recursion level used for supersampling (3 is a nice value). * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_shear() instead. * * Returns: The sheared drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_shear (gint32 drawable_ID, GimpOrientationType shear_type, gdouble magnitude, GimpTransformDirection transform_direction, GimpInterpolationType interpolation, gboolean supersample, gint recursion_level, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-shear", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_INT32, shear_type, GIMP_PDB_FLOAT, magnitude, GIMP_PDB_INT32, transform_direction, GIMP_PDB_INT32, interpolation, GIMP_PDB_INT32, supersample, GIMP_PDB_INT32, recursion_level, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_shear_default: * @drawable_ID: The affected drawable. * @shear_type: Type of shear. * @magnitude: The magnitude of the shear. * @interpolate: Whether to use interpolation and supersampling. * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_shear() instead. * * Returns: The sheared drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_shear_default (gint32 drawable_ID, GimpOrientationType shear_type, gdouble magnitude, gboolean interpolate, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-shear-default", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_INT32, shear_type, GIMP_PDB_FLOAT, magnitude, GIMP_PDB_INT32, interpolate, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_2d: * @drawable_ID: The affected drawable. * @source_x: X coordinate of the transformation center. * @source_y: Y coordinate of the transformation center. * @scale_x: Amount to scale in x direction. * @scale_y: Amount to scale in y direction. * @angle: The angle of rotation (radians). * @dest_x: X coordinate of where the center goes. * @dest_y: Y coordinate of where the center goes. * @transform_direction: Direction of transformation. * @interpolation: Type of interpolation. * @supersample: This parameter is ignored, supersampling is performed based on the interpolation type. * @recursion_level: Maximum recursion level used for supersampling (3 is a nice value). * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_2d() instead. * * Returns: The transformed drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_2d (gint32 drawable_ID, gdouble source_x, gdouble source_y, gdouble scale_x, gdouble scale_y, gdouble angle, gdouble dest_x, gdouble dest_y, GimpTransformDirection transform_direction, GimpInterpolationType interpolation, gboolean supersample, gint recursion_level, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-2d", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, source_x, GIMP_PDB_FLOAT, source_y, GIMP_PDB_FLOAT, scale_x, GIMP_PDB_FLOAT, scale_y, GIMP_PDB_FLOAT, angle, GIMP_PDB_FLOAT, dest_x, GIMP_PDB_FLOAT, dest_y, GIMP_PDB_INT32, transform_direction, GIMP_PDB_INT32, interpolation, GIMP_PDB_INT32, supersample, GIMP_PDB_INT32, recursion_level, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_2d_default: * @drawable_ID: The affected drawable. * @source_x: X coordinate of the transformation center. * @source_y: Y coordinate of the transformation center. * @scale_x: Amount to scale in x direction. * @scale_y: Amount to scale in y direction. * @angle: The angle of rotation (radians). * @dest_x: X coordinate of where the center goes. * @dest_y: Y coordinate of where the center goes. * @interpolate: Whether to use interpolation and supersampling. * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_2d() instead. * * Returns: The transformed drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_2d_default (gint32 drawable_ID, gdouble source_x, gdouble source_y, gdouble scale_x, gdouble scale_y, gdouble angle, gdouble dest_x, gdouble dest_y, gboolean interpolate, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-2d-default", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, source_x, GIMP_PDB_FLOAT, source_y, GIMP_PDB_FLOAT, scale_x, GIMP_PDB_FLOAT, scale_y, GIMP_PDB_FLOAT, angle, GIMP_PDB_FLOAT, dest_x, GIMP_PDB_FLOAT, dest_y, GIMP_PDB_INT32, interpolate, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_matrix: * @drawable_ID: The affected drawable. * @coeff_0_0: coefficient (0,0) of the transformation matrix. * @coeff_0_1: coefficient (0,1) of the transformation matrix. * @coeff_0_2: coefficient (0,2) of the transformation matrix. * @coeff_1_0: coefficient (1,0) of the transformation matrix. * @coeff_1_1: coefficient (1,1) of the transformation matrix. * @coeff_1_2: coefficient (1,2) of the transformation matrix. * @coeff_2_0: coefficient (2,0) of the transformation matrix. * @coeff_2_1: coefficient (2,1) of the transformation matrix. * @coeff_2_2: coefficient (2,2) of the transformation matrix. * @transform_direction: Direction of transformation. * @interpolation: Type of interpolation. * @supersample: This parameter is ignored, supersampling is performed based on the interpolation type. * @recursion_level: Maximum recursion level used for supersampling (3 is a nice value). * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_matrix() instead. * * Returns: The transformed drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_matrix (gint32 drawable_ID, gdouble coeff_0_0, gdouble coeff_0_1, gdouble coeff_0_2, gdouble coeff_1_0, gdouble coeff_1_1, gdouble coeff_1_2, gdouble coeff_2_0, gdouble coeff_2_1, gdouble coeff_2_2, GimpTransformDirection transform_direction, GimpInterpolationType interpolation, gboolean supersample, gint recursion_level, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-matrix", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, coeff_0_0, GIMP_PDB_FLOAT, coeff_0_1, GIMP_PDB_FLOAT, coeff_0_2, GIMP_PDB_FLOAT, coeff_1_0, GIMP_PDB_FLOAT, coeff_1_1, GIMP_PDB_FLOAT, coeff_1_2, GIMP_PDB_FLOAT, coeff_2_0, GIMP_PDB_FLOAT, coeff_2_1, GIMP_PDB_FLOAT, coeff_2_2, GIMP_PDB_INT32, transform_direction, GIMP_PDB_INT32, interpolation, GIMP_PDB_INT32, supersample, GIMP_PDB_INT32, recursion_level, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; } /** * gimp_drawable_transform_matrix_default: * @drawable_ID: The affected drawable. * @coeff_0_0: coefficient (0,0) of the transformation matrix. * @coeff_0_1: coefficient (0,1) of the transformation matrix. * @coeff_0_2: coefficient (0,2) of the transformation matrix. * @coeff_1_0: coefficient (1,0) of the transformation matrix. * @coeff_1_1: coefficient (1,1) of the transformation matrix. * @coeff_1_2: coefficient (1,2) of the transformation matrix. * @coeff_2_0: coefficient (2,0) of the transformation matrix. * @coeff_2_1: coefficient (2,1) of the transformation matrix. * @coeff_2_2: coefficient (2,2) of the transformation matrix. * @interpolate: Whether to use interpolation and supersampling. * @clip_result: How to clip results. * * Deprecated: Use gimp_item_transform_matrix() instead. * * Returns: The transformed drawable. * * Since: GIMP 2.2 **/ gint32 gimp_drawable_transform_matrix_default (gint32 drawable_ID, gdouble coeff_0_0, gdouble coeff_0_1, gdouble coeff_0_2, gdouble coeff_1_0, gdouble coeff_1_1, gdouble coeff_1_2, gdouble coeff_2_0, gdouble coeff_2_1, gdouble coeff_2_2, gboolean interpolate, GimpTransformResize clip_result) { GimpParam *return_vals; gint nreturn_vals; gint32 ret_drawable_ID = -1; return_vals = gimp_run_procedure ("gimp-drawable-transform-matrix-default", &nreturn_vals, GIMP_PDB_DRAWABLE, drawable_ID, GIMP_PDB_FLOAT, coeff_0_0, GIMP_PDB_FLOAT, coeff_0_1, GIMP_PDB_FLOAT, coeff_0_2, GIMP_PDB_FLOAT, coeff_1_0, GIMP_PDB_FLOAT, coeff_1_1, GIMP_PDB_FLOAT, coeff_1_2, GIMP_PDB_FLOAT, coeff_2_0, GIMP_PDB_FLOAT, coeff_2_1, GIMP_PDB_FLOAT, coeff_2_2, GIMP_PDB_INT32, interpolate, GIMP_PDB_INT32, clip_result, GIMP_PDB_END); if (return_vals[0].data.d_status == GIMP_PDB_SUCCESS) ret_drawable_ID = return_vals[1].data.d_drawable; gimp_destroy_params (return_vals, nreturn_vals); return ret_drawable_ID; }