# Makefile.in generated by automake 1.11.1 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. VPATH = ../../../gcc-5.1.0/libsanitizer pkgdatadir = $(datadir)/package-unused pkgincludedir = $(includedir)/package-unused pkglibdir = $(libdir)/package-unused pkglibexecdir = $(libexecdir)/package-unused am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = i486-slackware-linux-gnu host_triplet = i486-slackware-linux-gnu target_triplet = i486-slackware-linux-gnu am__append_1 = include/sanitizer/common_interface_defs.h \ include/sanitizer/lsan_interface.h \ include/sanitizer/asan_interface.h am__append_2 = interception am__append_3 = libbacktrace #am__append_4 = tsan subdir = . DIST_COMMON = ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/configure $(am__configure_deps) \ $(srcdir)/config.h.in $(srcdir)/../mkinstalldirs \ $(srcdir)/libsanitizer.spec.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \ $(top_srcdir)/../config/depstand.m4 \ $(top_srcdir)/../config/lead-dot.m4 \ $(top_srcdir)/../config/libstdc++-raw-cxx.m4 \ $(top_srcdir)/../config/multi.m4 \ $(top_srcdir)/../config/override.m4 \ $(top_srcdir)/../config/stdint.m4 \ $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \ $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \ $(top_srcdir)/acinclude.m4 $(top_srcdir)/../libtool.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = libsanitizer.spec CONFIG_CLEAN_VPATH_FILES = SOURCES = MULTISRCTOP = MULTIBUILDTOP = MULTIDIRS = MULTISUBDIR = MULTIDO = $(MAKE) MULTICLEAN = $(MAKE) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(sanincludedir)" \ "$(DESTDIR)$(toolexeclibdir)" HEADERS = $(nodist_saninclude_HEADERS) $(nodist_toolexeclib_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS ETAGS = etags CTAGS = ctags DIST_SUBDIRS = sanitizer_common interception libbacktrace lsan asan \ ubsan tsan ACLOCAL = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run aclocal-1.11 ALLOC_FILE = mmap.lo AMTAR = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run tar AR = /usr/i486-slackware-linux/bin/ar AUTOCONF = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run autoconf AUTOHEADER = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run autoheader AUTOMAKE = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run automake-1.11 AWK = gawk BACKTRACE_SUPPORTED = 1 BACKTRACE_SUPPORTS_THREADS = 0 BACKTRACE_USES_MALLOC = 0 CC = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/ -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include CCAS = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/ -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include CCASDEPMODE = depmode=gcc3 CCASFLAGS = -g -O2 -O3 -march=amdfam10 CCDEPMODE = depmode=gcc3 CFLAGS = -g -O2 -O3 -march=amdfam10 CPP = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/ -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include -E CPPFLAGS = CXX = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -shared-libgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc -nostdinc++ -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src/.libs -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/libsupc++/.libs -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include CXXCPP = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -shared-libgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc -nostdinc++ -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src/.libs -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/libsupc++/.libs -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = -g -O2 -O3 -march=amdfam10 -D_GNU_SOURCE CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /usr/bin/grep -E EXEEXT = FGREP = /usr/bin/grep -F FORMAT_FILE = elf.lo GREP = /usr/bin/grep INSTALL = /usr/bin/ginstall -c INSTALL_DATA = /usr/bin/ginstall -c -m 644 INSTALL_PROGRAM = /usr/bin/ginstall -c INSTALL_SCRIPT = /usr/bin/ginstall -c INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LD = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/collect-ld LDFLAGS = LIBOBJS = LIBS = LIBSTDCXX_RAW_CXX_CXXFLAGS = -I$(top_builddir)/../libstdc++-v3/include -I$(top_builddir)/../libstdc++-v3/include/$(target_noncanonical) -I$(top_srcdir)/../libstdc++-v3/libsupc++ LIBSTDCXX_RAW_CXX_LDFLAGS = $(top_builddir)/../libstdc++-v3/src/libstdc++.la LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = lipo LN_S = ln -s LTLIBOBJS = MAINT = # MAKEINFO = makeinfo --split-size=5000000 MKDIR_P = /usr/bin/mkdir -p NM = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/nm NMEDIT = OBJDUMP = /usr/i486-slackware-linux/bin/objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = package-unused PACKAGE_BUGREPORT = libsanitizer PACKAGE_NAME = package-unused PACKAGE_STRING = package-unused version-unused PACKAGE_TARNAME = package-unused PACKAGE_URL = PACKAGE_VERSION = version-unused PATH_SEPARATOR = : RANLIB = /usr/i486-slackware-linux/bin/ranlib SED = /usr/bin/sed SET_MAKE = SHELL = /bin/sh STRIP = /usr/i486-slackware-linux/bin/strip TSAN_TARGET_DEPENDENT_OBJECTS = VERSION = version-unused VIEW_FILE = mmapio.lo abs_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libsanitizer abs_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libsanitizer/../../../gcc-5.1.0/libsanitizer abs_top_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libsanitizer abs_top_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libsanitizer/../../../gcc-5.1.0/libsanitizer ac_ct_CC = ac_ct_CXX = ac_ct_DUMPBIN = am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = i486-slackware-linux-gnu build_alias = i486-slackware-linux build_cpu = i486 build_os = linux-gnu build_vendor = slackware builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} enable_shared = yes enable_static = yes exec_prefix = ${prefix} host = i486-slackware-linux-gnu host_alias = i486-slackware-linux host_cpu = i486 host_os = linux-gnu host_vendor = slackware htmldir = ${docdir} includedir = ${prefix}/include infodir = /usr/info install_sh = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/install-sh libdir = /usr/lib libexecdir = ${exec_prefix}/libexec link_libasan = -lpthread -ldl -lm link_liblsan = -lpthread -ldl -lm link_libtsan = -lpthread -ldl -lm link_libubsan = -lpthread -ldl -lm localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = /usr/man mkdir_p = /usr/bin/mkdir -p multi_basedir = ../../../gcc-5.1.0/libsanitizer/.. oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr program_transform_name = s,y,y, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = ../../../gcc-5.1.0/libsanitizer sysconfdir = ${prefix}/etc target = i486-slackware-linux-gnu target_alias = i486-slackware-linux target_cpu = i486 target_noncanonical = i486-slackware-linux target_os = linux-gnu target_vendor = slackware toolexecdir = $(libdir)/gcc-lib/$(target_alias) toolexeclibdir = $(libdir) top_build_prefix = top_builddir = . top_srcdir = ../../../gcc-5.1.0/libsanitizer ACLOCAL_AMFLAGS = -I .. -I ../config sanincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/include/sanitizer nodist_saninclude_HEADERS = $(am__append_1) SUBDIRS = sanitizer_common $(am__append_2) \ $(am__append_3) lsan asan ubsan \ $(am__append_4) gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER) # Work around what appears to be a GNU make bug handling MAKEFLAGS # values defined in terms of make variables, as is the case for CC and # friends when we are called from the top level Makefile. AM_MAKEFLAGS = \ "AR_FLAGS=$(AR_FLAGS)" \ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \ "CFLAGS=$(CFLAGS)" \ "CXXFLAGS=$(CXXFLAGS)" \ "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \ "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \ "INSTALL=$(INSTALL)" \ "INSTALL_DATA=$(INSTALL_DATA)" \ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \ "JC1FLAGS=$(JC1FLAGS)" \ "LDFLAGS=$(LDFLAGS)" \ "LIBCFLAGS=$(LIBCFLAGS)" \ "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \ "MAKE=$(MAKE)" \ "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \ "PICFLAG=$(PICFLAG)" \ "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \ "SHELL=$(SHELL)" \ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ "exec_prefix=$(exec_prefix)" \ "infodir=$(infodir)" \ "libdir=$(libdir)" \ "prefix=$(prefix)" \ "includedir=$(includedir)" \ "AR=$(AR)" \ "AS=$(AS)" \ "LD=$(LD)" \ "LIBCFLAGS=$(LIBCFLAGS)" \ "NM=$(NM)" \ "PICFLAG=$(PICFLAG)" \ "RANLIB=$(RANLIB)" \ "DESTDIR=$(DESTDIR)" MAKEOVERRIDES = nodist_toolexeclib_HEADERS = libsanitizer.spec all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: # $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): # $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: # $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 libsanitizer.spec: $(top_builddir)/config.status $(srcdir)/libsanitizer.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt # GNU Make needs to see an explicit $(MAKE) variable in the command it # runs to enable its job server during parallel builds. Hence the # comments below. all-multi: $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE) install-multi: $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE) mostlyclean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE) clean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE) distclean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE) maintainer-clean-multi: $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE) install-nodist_sanincludeHEADERS: $(nodist_saninclude_HEADERS) @$(NORMAL_INSTALL) test -z "$(sanincludedir)" || $(MKDIR_P) "$(DESTDIR)$(sanincludedir)" @list='$(nodist_saninclude_HEADERS)'; test -n "$(sanincludedir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sanincludedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(sanincludedir)" || exit $$?; \ done uninstall-nodist_sanincludeHEADERS: @$(NORMAL_UNINSTALL) @list='$(nodist_saninclude_HEADERS)'; test -n "$(sanincludedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(sanincludedir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(sanincludedir)" && rm -f $$files install-nodist_toolexeclibHEADERS: $(nodist_toolexeclib_HEADERS) @$(NORMAL_INSTALL) test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(toolexeclibdir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(toolexeclibdir)" || exit $$?; \ done uninstall-nodist_toolexeclibHEADERS: @$(NORMAL_UNINSTALL) @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ test -n "$$files" || exit 0; \ echo " ( cd '$(DESTDIR)$(toolexeclibdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(toolexeclibdir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-am: all-am check: check-recursive all-am: Makefile all-multi $(HEADERS) config.h installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(sanincludedir)" "$(DESTDIR)$(toolexeclibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-multi clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-multi distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-nodist_sanincludeHEADERS install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-multi install-nodist_toolexeclibHEADERS install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-multi maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-multi mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-nodist_sanincludeHEADERS \ uninstall-nodist_toolexeclibHEADERS .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all all-multi \ clean-multi ctags-recursive distclean-multi install-am \ install-multi install-strip maintainer-clean-multi \ mostlyclean-multi tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am all-multi am--refresh check check-am clean \ clean-generic clean-libtool clean-multi ctags ctags-recursive \ distclean distclean-generic distclean-hdr distclean-libtool \ distclean-multi distclean-tags dvi dvi-am html html-am info \ info-am install install-am install-data install-data-am \ install-dvi install-dvi-am install-exec install-exec-am \ install-html install-html-am install-info install-info-am \ install-man install-multi install-nodist_sanincludeHEADERS \ install-nodist_toolexeclibHEADERS install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-multi mostlyclean \ mostlyclean-generic mostlyclean-libtool mostlyclean-multi pdf \ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-nodist_sanincludeHEADERS \ uninstall-nodist_toolexeclibHEADERS # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: PWD_COMMAND=$${PWDCMD-pwd} # FIXME: There should be an @-sign in front of the `if'. # Leave out until this is tested a bit more. multi-do: if [ -z "$(MULTIDIRS)" ]; then \ true; \ else \ rootpre=`${PWD_COMMAND}`/; export rootpre; \ srcrootpre=`cd $(srcdir); ${PWD_COMMAND}`/; export srcrootpre; \ lib=`echo "$${rootpre}" | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \ compiler="$(CC)"; \ for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \ dir=`echo $$i | sed -e 's/;.*$$//'`; \ if [ "$${dir}" = "." ]; then \ true; \ else \ if [ -d ../$${dir}/$${lib} ]; then \ flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \ if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \ CFLAGS="$(CFLAGS) $${flags}" \ CCASFLAGS="$(CCASFLAGS) $${flags}" \ FCFLAGS="$(FCFLAGS) $${flags}" \ FFLAGS="$(FFLAGS) $${flags}" \ ADAFLAGS="$(ADAFLAGS) $${flags}" \ prefix="$(prefix)" \ exec_prefix="$(exec_prefix)" \ GCJFLAGS="$(GCJFLAGS) $${flags}" \ GOCFLAGS="$(GOCFLAGS) $${flags}" \ CXXFLAGS="$(CXXFLAGS) $${flags}" \ LIBCFLAGS="$(LIBCFLAGS) $${flags}" \ LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \ LDFLAGS="$(LDFLAGS) $${flags}" \ MULTIFLAGS="$${flags}" \ DESTDIR="$(DESTDIR)" \ INSTALL="$(INSTALL)" \ INSTALL_DATA="$(INSTALL_DATA)" \ INSTALL_PROGRAM="$(INSTALL_PROGRAM)" \ INSTALL_SCRIPT="$(INSTALL_SCRIPT)" \ $(DO)); then \ true; \ else \ exit 1; \ fi; \ else true; \ fi; \ fi; \ done; \ fi # FIXME: There should be an @-sign in front of the `if'. # Leave out until this is tested a bit more. multi-clean: if [ -z "$(MULTIDIRS)" ]; then \ true; \ else \ lib=`${PWD_COMMAND} | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \ for dir in : $(MULTIDIRS); do \ test $$dir != : || continue; \ if [ -f ../$${dir}/$${lib}/Makefile ]; then \ if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \ then true; \ else exit 1; \ fi; \ else true; \ fi; \ done; \ fi