# Makefile.in generated by automake 1.11.1 from Makefile.am.
# testsuite/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


VPATH = ../../../../gcc-5.1.0/libstdc++-v3/testsuite
pkgdatadir = $(datadir)/libstdc++
pkgincludedir = $(includedir)/libstdc++
pkglibdir = $(libdir)/libstdc++
pkglibexecdir = $(libexecdir)/libstdc++
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i486-slackware-linux-gnu
host_triplet = i486-slackware-linux-gnu
target_triplet = i486-slackware-linux-gnu
DIST_COMMON = $(top_srcdir)/fragment.am $(srcdir)/Makefile.in \
	$(srcdir)/Makefile.am
subdir = testsuite
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
	$(top_srcdir)/../config/enable.m4 \
	$(top_srcdir)/../config/futex.m4 \
	$(top_srcdir)/../config/iconv.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/lib-ld.m4 \
	$(top_srcdir)/../config/lib-link.m4 \
	$(top_srcdir)/../config/lib-prefix.m4 \
	$(top_srcdir)/../config/lthostflags.m4 \
	$(top_srcdir)/../config/multi.m4 \
	$(top_srcdir)/../config/no-executables.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/stdint.m4 \
	$(top_srcdir)/../config/unwind_ipinfo.m4 \
	$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
	$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
	$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
	$(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/../config/gc++filt.m4 \
	$(top_srcdir)/../config/tls.m4 $(top_srcdir)/../config/gthr.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
depcomp =
am__depfiles_maybe =
SOURCES =
ABI_TWEAKS_SRCDIR = config/cpu/generic
ACLOCAL = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run aclocal-1.11
ALLOCATOR_H = config/allocator/new_allocator_base.h
ALLOCATOR_NAME = __gnu_cxx::new_allocator
AMTAR = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run tar
AR = /usr/i486-slackware-linux/bin/ar
AS = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/as
ATOMICITY_SRCDIR = config/cpu/generic/atomicity_builtins
ATOMIC_FLAGS = -march=native
ATOMIC_WORD_SRCDIR = config/cpu/generic
AUTOCONF = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run autoconf
AUTOHEADER = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run autoheader
AUTOMAKE = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run automake-1.11
AWK = gawk
BASIC_FILE_CC = config/io/basic_file_stdio.cc
BASIC_FILE_H = config/io/basic_file_stdio.h
CC = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/ -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include   
CCODECVT_CC = config/locale/gnu/codecvt_members.cc
CCOLLATE_CC = config/locale/gnu/collate_members.cc
CCTYPE_CC = config/locale/gnu/ctype_members.cc
CFLAGS = -g -O2 -O3 -march=amdfam10
CLOCALE_CC = config/locale/gnu/c_locale.cc
CLOCALE_H = config/locale/gnu/c_locale.h
CLOCALE_INTERNAL_H = config/locale/gnu/c++locale_internal.h
CMESSAGES_CC = config/locale/gnu/messages_members.cc
CMESSAGES_H = config/locale/gnu/messages_members.h
CMONEY_CC = config/locale/gnu/monetary_members.cc
CNUMERIC_CC = config/locale/gnu/numeric_members.cc
CPP = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/ -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include    -E
CPPFLAGS = 
CPU_DEFINES_SRCDIR = config/cpu/generic
CPU_OPT_BITS_RANDOM = config/cpu/i486/opt/bits/opt_random.h
CPU_OPT_EXT_RANDOM = config/cpu/i486/opt/ext/opt_random.h
CSTDIO_H = config/io/c_io_stdio.h
CTIME_CC = config/locale/gnu/time_members.cc
CTIME_H = config/locale/gnu/time_members.h
CXX =  /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -shared-libgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc -nostdinc++ -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src/.libs -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/libsupc++/.libs -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include   
CXXCPP =  /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -shared-libgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc -nostdinc++ -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src/.libs -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/libsupc++/.libs -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include    -E
CXXFILT = /usr/bin/c++filt
CXXFLAGS = -g -O2 -O3 -march=amdfam10 -D_GNU_SOURCE
CYGPATH_W = echo
C_INCLUDE_DIR = ${glibcxx_srcdir}/include/c_global
DBLATEX = no
DEBUG_FLAGS = -gdwarf-4 -g3 -O0
DEFS = -DHAVE_CONFIG_H
DOT = no
DOXYGEN = yes
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
ERROR_CONSTANTS_SRCDIR = config/os/generic
EXEEXT = 
EXTRA_CXX_FLAGS = 
FGREP = /usr/bin/grep -F
GLIBCXX_INCLUDES = -I/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/include/i486-slackware-linux -I/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/include -I/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/libstdc++-v3/libsupc++
GLIBCXX_LIBS = 
GREP = /usr/bin/grep
HWCAP_FLAGS = 
INSTALL = /usr/bin/ginstall -c
INSTALL_DATA = /usr/bin/ginstall -c -m 644
INSTALL_PROGRAM = /usr/bin/ginstall -c
INSTALL_SCRIPT = /usr/bin/ginstall -c
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/collect-ld
LDFLAGS = 
LIBICONV = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = lipo
LN_S = ln -s
LTLIBICONV = 
LTLIBOBJS = 
MAINT = #
MAKEINFO = makeinfo --split-size=5000000 --split-size=5000000
MKDIR_P = /usr/bin/mkdir -p
NM = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/nm
NMEDIT = 
OBJDUMP = /usr/i486-slackware-linux/bin/objdump
OBJEXT = o
OPTIMIZE_CXXFLAGS = 
OPT_LDFLAGS = -Wl,-O1 -Wl,-z,relro
OS_INC_SRCDIR = config/os/gnu-linux
OTOOL = 
OTOOL64 = 
PACKAGE = libstdc++
PACKAGE_BUGREPORT = 
PACKAGE_NAME = package-unused
PACKAGE_STRING = package-unused version-unused
PACKAGE_TARNAME = libstdc++
PACKAGE_URL = 
PACKAGE_VERSION = version-unused
PATH_SEPARATOR = :
PDFLATEX = yes
RANLIB = /usr/i486-slackware-linux/bin/ranlib
SECTION_FLAGS = -ffunction-sections -fdata-sections
SECTION_LDFLAGS = -Wl,--gc-sections 
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = /usr/i486-slackware-linux/bin/strip
SYMVER_FILE = config/abi/pre/gnu.ver
TOPLEVEL_INCLUDES = -I$(toplevel_srcdir)/libgcc
USE_NLS = yes
VERSION = version-unused
VTV_CXXFLAGS = 
VTV_CXXLINKFLAGS = 
VTV_PCH_CXXFLAGS = 
WARN_FLAGS = -Wall -Wextra -Wwrite-strings -Wcast-qual -Wabi
WERROR = 
XMLLINT = yes
XSLTPROC = yes
XSL_STYLE_DIR = 
abs_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/testsuite
abs_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/../../../gcc-5.1.0/libstdc++-v3/testsuite
abs_top_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3
abs_top_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/../../../gcc-5.1.0/libstdc++-v3
ac_ct_CC = 
ac_ct_CXX = 
ac_ct_DUMPBIN = 
am__leading_dot = .
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
baseline_dir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/libstdc++-v3/config/abi/post/i486-linux-gnu
baseline_subdir_switch = --print-multi-directory
bindir = ${exec_prefix}/bin
build = i486-slackware-linux-gnu
build_alias = i486-slackware-linux
build_cpu = i486
build_os = linux-gnu
build_vendor = slackware
builddir = .
check_msgfmt = yes
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
enable_shared = yes
enable_static = yes
exec_prefix = ${prefix}
glibcxx_MOFILES =  de.mo fr.mo
glibcxx_PCHFLAGS = -include bits/stdc++.h
glibcxx_POFILES =  de.po fr.po
glibcxx_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3
glibcxx_compiler_pic_flag =  -fPIC -DPIC
glibcxx_compiler_shared_flag = -D_GLIBCXX_SHARED
glibcxx_cxx98_abi = 0
glibcxx_localedir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/po/share/locale
glibcxx_lt_pic_flag = -prefer-pic
glibcxx_prefixdir = /usr
glibcxx_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/libstdc++-v3
glibcxx_toolexecdir = ${libdir}/gcc/${host_alias}
glibcxx_toolexeclibdir = ${libdir}
gxx_include_dir = ${prefix}/include/c++/${gcc_version}
host = i486-slackware-linux-gnu
host_alias = i486-slackware-linux
host_cpu = i486
host_os = linux-gnu
host_vendor = slackware
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = /usr/info
install_sh = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/install-sh
libdir = /usr/lib
libexecdir = ${exec_prefix}/libexec
libtool_VERSION = 6:21:0
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lt_host_flags = 
mandir = /usr/man
mkdir_p = /usr/bin/mkdir -p
multi_basedir = ../../../gcc-5.1.0/libstdc++-v3/..
oldincludedir = /usr/include
pdfdir = ${docdir}
port_specific_symbol_files =  $(top_srcdir)/config/abi/pre/float128.ver
prefix = /usr
program_transform_name = s,y,y,
psdir = ${docdir}
python_mod_dir = /lib/python2.7/site-packages
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = ../../../../gcc-5.1.0/libstdc++-v3/testsuite
sysconfdir = ${prefix}/etc
target = i486-slackware-linux-gnu
target_alias = i486-slackware-linux
target_cpu = i486
target_os = linux-gnu
target_vendor = slackware
thread_header = gthr-posix.h
top_build_prefix = ../
top_builddir = ..
top_srcdir = ../../../../gcc-5.1.0/libstdc++-v3
toplevel_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/..
toplevel_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/libstdc++-v3/..
AUTOMAKE_OPTIONS = nostdinc
RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
EXPECT = expect

# May be used by various substitution variables.
gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
MAINT_CHARSET = latin1
mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
PWD_COMMAND = $${PWDCMD-pwd}
STAMP = echo timestamp >
toolexecdir = $(glibcxx_toolexecdir)
toolexeclibdir = $(glibcxx_toolexeclibdir)
#WERROR_FLAG = 
WERROR_FLAG = $(WERROR)
#XTEMPLATE_FLAGS = 
XTEMPLATE_FLAGS = -fno-implicit-templates

# These bits are all figured out from configure.  Look in acinclude.m4
# or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.
CONFIG_CXXFLAGS = \
	$(SECTION_FLAGS) $(HWCAP_FLAGS) -frandom-seed=$@

WARN_CXXFLAGS = \
	$(WARN_FLAGS) $(WERROR_FLAG) -fdiagnostics-show-location=once 


# -I/-D flags to pass when compiling.
AM_CPPFLAGS = $(GLIBCXX_INCLUDES)

# Generated lists of files to run.  All of these names are valid make
# targets, if you wish to generate a list manually.
lists_of_files = \
   testsuite_files \
   testsuite_files_interactive \
   testsuite_files_performance

extract_symvers = $(glibcxx_builddir)/scripts/extract_symvers
baseline_subdir := $(shell $(CXX) $(baseline_subdir_switch))
check_p_numbers0 := 1 2 3 4 5 6 7 8 9
check_p_numbers1 := 0 $(check_p_numbers0)
check_p_numbers2 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers1)))
check_p_numbers3 := $(addprefix 0,$(check_p_numbers1)) $(check_p_numbers2)
check_p_numbers4 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers3)))
check_p_numbers5 := $(addprefix 0,$(check_p_numbers3)) $(check_p_numbers4)
check_p_numbers6 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers5)))
check_p_numbers := $(check_p_numbers0) $(check_p_numbers2) $(check_p_numbers4) $(check_p_numbers6)
check_p_subdirs = $(wordlist 1,$(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128),$(check_p_numbers))
check_DEJAGNU_normal_targets = $(addprefix check-DEJAGNUnormal,$(check_p_subdirs))

# Runs the testsuite, but in compile only mode.
# Can be used to test sources with non-GNU FE's at various warning
# levels and for checking compile time across releases.
# See script.
compile_script = ${glibcxx_srcdir}/scripts/check_compile

# Runs the testsuite/performance tests.
# Some of these tests create large (~75MB) files, allocate huge
# ammounts of memory, or otherwise tie up machine resources. Thus,
# running this is off by default.
# XXX Need to add dependency on libtestc++.a
check_performance_script = ${glibcxx_srcdir}/scripts/check_performance

# Runs the testsuite in debug mode.
debug_flags = "unix/-D_GLIBCXX_DEBUG"

# Runs the testsuite in parallel mode.
libgomp_dir = ${glibcxx_builddir}/../libgomp
libgomp_flags = -B${glibcxx_builddir}/../libgomp \
              -I${glibcxx_builddir}/../libgomp \
	      -L${glibcxx_builddir}/../libgomp/.libs -lgomp

atomic_flags = $(ATOMIC_FLAGS)
parallel_flags = "unix/-D_GLIBCXX_PARALLEL/-fopenmp"

# Runs the testsuite in profile mode.
profile_flags = "unix/-D_GLIBCXX_PROFILE"

# By adding these files here, automake will remove them for 'make clean'
CLEANFILES = *.txt *.tst *.exe core* filebuf_* tmp* ostream_* *.log *.sum \
	     testsuite_* site.exp abi_check baseline_symbols *TEST* *.dat \
	     *.ii *.s *.o *.cc *.x *.a *.so *.xml *.raw *.out *.gdb

all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps testsuite/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign --ignore-deps testsuite/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:

check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	clean-local distclean distclean-generic distclean-libtool dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am


# This rule generates all of the testsuite_files* lists at once.
${lists_of_files}:
	${glibcxx_srcdir}/scripts/create_testsuite_files \
	  ${glibcxx_srcdir}/testsuite `${PWD_COMMAND}`

# We need more things in site.exp, but automake completely controls the
# creation of that file; there's no way to append to it without messing up
# the dependancy chains.  So we overrule automake.  This rule is exactly
# what it would have generated, plus our own additions.
site.exp: Makefile
	@echo 'Making a new site.exp file...'
	@echo '## these variables are automatically generated by make ##' >site.tmp
	@echo '# Do not edit here.  If you wish to override these values' >>site.tmp
	@echo '# edit the last section' >>site.tmp
	@echo 'set srcdir $(srcdir)' >>site.tmp
	@echo "set objdir `pwd`" >>site.tmp
	@echo 'set build_alias "$(build_alias)"' >>site.tmp
	@echo 'set build_triplet $(build_triplet)' >>site.tmp
	@echo 'set host_alias "$(host_alias)"' >>site.tmp
	@echo 'set host_triplet $(host_triplet)' >>site.tmp
	@echo 'set target_alias "$(target_alias)"' >>site.tmp
	@echo 'set target_triplet $(target_triplet)' >>site.tmp
	@echo 'set target_triplet $(target_triplet)' >>site.tmp
	@echo 'set libiconv "$(LIBICONV)"' >>site.tmp
	@echo 'set baseline_dir "$(baseline_dir)"' >> site.tmp
	@echo 'set baseline_subdir_switch "$(baseline_subdir_switch)"' >> site.tmp
	@echo 'set TEST_GCC_EXEC_PREFIX "$(libdir)/gcc/"' >> site.tmp
	@echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp
	@test ! -f site.exp || \
	  sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp
	@-rm -f site.bak
	@test ! -f site.exp || mv site.exp site.bak
	@mv site.tmp site.exp

baseline_symbols:
	-@(output=${baseline_dir}/${baseline_subdir}/baseline_symbols.txt; \
	  if test ! -f $${output}; then \
	    echo "Baseline file doesn't exist."; \
	    echo "Try 'make new-abi-baseline' to create it."; \
	    exit 1; \
	  fi; true)

new-abi-baseline:
	-@$(mkinstalldirs) ${baseline_dir}/${baseline_subdir}
	-@(output=${baseline_dir}/${baseline_subdir}/baseline_symbols.txt; \
	  if test -f $${output}; then \
	    output=$${output}.new; \
	    t=`echo $${output} | sed 's=.*config/abi/=='`; \
	    echo "Baseline file already exists, writing to $${t} instead."; \
	  fi; \
	  ${extract_symvers} ../src/.libs/libstdc++.so $${output})

%/site.exp: site.exp
	-@test -d $* || mkdir $*
	@srcdir=`cd $(srcdir); ${PWD_COMMAND}`;
	@objdir=`${PWD_COMMAND}`/$*; \
	sed -e "s|^set srcdir .*$$|set srcdir $$srcdir|" \
	    -e "s|^set objdir .*$$|set objdir $$objdir|" \
	    site.exp > $*/site.exp.tmp
	@-rm -f $*/site.bak
	@test ! -f $*/site.exp || mv $*/site.exp $*/site.bak
	@mv $*/site.exp.tmp $*/site.exp
$(check_DEJAGNU_normal_targets): check-DEJAGNUnormal%: normal%/site.exp

# Run the testsuite in normal mode.
check-DEJAGNU $(check_DEJAGNU_normal_targets): check-DEJAGNU%: site.exp
	$(if $*,@)AR="$(AR)"; export AR; \
	RANLIB="$(RANLIB)"; export RANLIB; \
	if [ -z "$*" ] && [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
	  rm -rf normal-parallel || true; \
	  mkdir normal-parallel; \
	  $(MAKE) $(AM_MAKEFLAGS) $(check_DEJAGNU_normal_targets); \
	  rm -rf normal-parallel || true; \
	  for idx in $(check_p_subdirs); do \
	    if [ -d normal$$idx ]; then \
	      mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \
	      mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \
	    fi; \
	  done; \
	  $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh \
	    normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \
	  $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh -L \
	    normal[0-9]*/libstdc++.log.sep > libstdc++.log; \
	  exit 0; \
	fi; \
	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
	EXPECT=$(EXPECT); export EXPECT; \
	runtest=$(RUNTEST); \
	if [ -z "$$runtest" ]; then runtest=runtest; fi; \
	tool=libstdc++; \
	if [ -n "$*" ]; then \
	  if [ -f normal-parallel/finished ]; then rm -rf "$*"; exit 0; fi; \
	  GCC_RUNTEST_PARALLELIZE_DIR=`${PWD_COMMAND}`/normal-parallel; \
	  export GCC_RUNTEST_PARALLELIZE_DIR; \
	  cd "$*"; \
	fi; \
	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
	  $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
		    $(RUNTESTFLAGS); \
	  if [ -n "$*" ]; then \
	    touch $$GCC_RUNTEST_PARALLELIZE_DIR/finished; \
	  fi; \
	else \
	  echo "WARNING: could not find \`runtest'" 1>&2; :;\
	fi

check-am:
	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
.PHONY: check-DEJAGNU

# Use 'new-abi-baseline' to create an initial symbol file.  Then run
# 'check-abi' to test for changes against that file.
check-abi: site.exp baseline_symbols 
	-@runtest $(AM_RUNTESTFLAGS) --tool libstdc++ $(RUNTESTFLAGS) abi.exp
check-compile: testsuite_files ${compile_script}
	-@(chmod + ${compile_script}; \
	  ${compile_script} ${glibcxx_srcdir} ${glibcxx_builddir})
check-performance: testsuite_files_performance ${performance_script}
	-@(chmod + ${check_performance_script}; \
	  ${check_performance_script} ${glibcxx_srcdir} ${glibcxx_builddir})

check-debug: site.exp
	outputdir=debug; export outputdir; \
	if test ! -d $${outputdir}; then \
	  mkdir $${outputdir}; \
	fi; \
	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
	EXPECT=$(EXPECT); export EXPECT; \
	$(MAKE) RUNTESTFLAGS="$(RUNTESTFLAGS) conformance.exp --outdir $${outputdir} --objdir $${outputdir} --target_board=$(debug_flags)" check-DEJAGNU;

check-parallel: site.exp
	-@(if test ! -d $${libgomp_dir}; then \
	  echo "Testing parallel mode failed as libgomp not present."; \
	  exit 1; \
	fi; \
	outputdir=parallel; export outputdir; \
	if test ! -d $${outputdir}; then \
	  mkdir $${outputdir}; \
	fi; \
	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
	EXPECT=$(EXPECT); export EXPECT; \
	$(MAKE) CXXFLAGS="$(atomic_flags) $(libgomp_flags)" RUNTESTFLAGS="$(RUNTESTFLAGS) conformance.exp --outdir $${outputdir} --objdir $${outputdir} --target_board=$(parallel_flags)" check-DEJAGNU; )

check-performance-parallel: testsuite_files_performance ${performance_script}
	-@(chmod + ${check_performance_script}; \
	CXXFLAGS="-D_GLIBCXX_PARALLEL -fopenmp $(atomic_flags) $(libgomp_flags)"; export CXXFLAGS; \
	${check_performance_script} ${glibcxx_srcdir} ${glibcxx_builddir})

check-profile: site.exp
	-@(outputdir=profile; export outputdir; \
	if test ! -d $${outputdir}; then \
	  mkdir $${outputdir}; \
	fi; \
	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
	EXPECT=$(EXPECT); export EXPECT; \
	$(MAKE) CXXFLAGS="$(atomic_flags) " RUNTESTFLAGS="$(RUNTESTFLAGS) conformance.exp --outdir $${outputdir} --objdir $${outputdir} --target_board=$(profile_flags)" check-DEJAGNU; )

.PHONY: baseline_symbols new-abi-baseline \
	check-abi check-compile check-performance check-parallel check-profile

# To remove directories.
clean-local:
	rm -rf de fr debug parallel profile binaries normal* 

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
MULTISUBDIR = 

PWD_COMMAND=$${PWDCMD-pwd}

# FIXME: There should be an @-sign in front of the `if'.
# Leave out until this is tested a bit more.
multi-do:
	if [ -z "$(MULTIDIRS)" ]; then \
	  true; \
	else \
	  rootpre=`${PWD_COMMAND}`/; export rootpre; \
	  srcrootpre=`cd $(srcdir); ${PWD_COMMAND}`/; export srcrootpre; \
	  lib=`echo "$${rootpre}" | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
	  compiler="$(CC)"; \
	  for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
	    dir=`echo $$i | sed -e 's/;.*$$//'`; \
	    if [ "$${dir}" = "." ]; then \
	      true; \
	    else \
	      if [ -d ../$${dir}/$${lib} ]; then \
		flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
		if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
				CFLAGS="$(CFLAGS) $${flags}" \
				CCASFLAGS="$(CCASFLAGS) $${flags}" \
				FCFLAGS="$(FCFLAGS) $${flags}" \
				FFLAGS="$(FFLAGS) $${flags}" \
				ADAFLAGS="$(ADAFLAGS) $${flags}" \
				prefix="$(prefix)" \
				exec_prefix="$(exec_prefix)" \
				GCJFLAGS="$(GCJFLAGS) $${flags}" \
				GOCFLAGS="$(GOCFLAGS) $${flags}" \
				CXXFLAGS="$(CXXFLAGS) $${flags}" \
				LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
				LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
				LDFLAGS="$(LDFLAGS) $${flags}" \
				MULTIFLAGS="$${flags}" \
				DESTDIR="$(DESTDIR)" \
				INSTALL="$(INSTALL)" \
				INSTALL_DATA="$(INSTALL_DATA)" \
				INSTALL_PROGRAM="$(INSTALL_PROGRAM)" \
				INSTALL_SCRIPT="$(INSTALL_SCRIPT)" \
				$(DO)); then \
		  true; \
		else \
		  exit 1; \
		fi; \
	      else true; \
	      fi; \
	    fi; \
	  done; \
	fi

# FIXME: There should be an @-sign in front of the `if'.
# Leave out until this is tested a bit more.
multi-clean:
	if [ -z "$(MULTIDIRS)" ]; then \
	  true; \
	else \
	  lib=`${PWD_COMMAND} | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
	  for dir in : $(MULTIDIRS); do \
	    test $$dir != : || continue; \
	    if [ -f ../$${dir}/$${lib}/testsuite/Makefile ]; then \
	      if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
	      then true; \
	      else exit 1; \
	      fi; \
	    else true; \
	    fi; \
	  done; \
	fi