# Makefile.in generated by automake 1.11.1 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.




VPATH = ../../../gcc-5.1.0/libvtv
pkgdatadir = $(datadir)/libvtv
pkgincludedir = $(includedir)/libvtv
pkglibdir = $(libdir)/libvtv
pkglibexecdir = $(libexecdir)/libvtv
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i486-slackware-linux-gnu
host_triplet = i486-slackware-linux-gnu
target_triplet = i486-slackware-linux-gnu
subdir = .
DIST_COMMON = ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
	$(top_srcdir)/configure $(am__configure_deps) \
	$(srcdir)/../mkinstalldirs $(srcdir)/../depcomp \
	$(am__libvtv_include_HEADERS_DIST)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
	$(top_srcdir)/../config/depstand.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/libstdc++-raw-cxx.m4 \
	$(top_srcdir)/../config/lthostflags.m4 \
	$(top_srcdir)/../config/multi.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
	$(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/../libtool.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(toolexeclibdir)" \
	"$(DESTDIR)$(libvtv_includedir)"
LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
libvtv_la_DEPENDENCIES =
am__objects_1 = vtv_start.lo vtv_malloc.lo vtv_rts.lo vtv_utils.lo \
	vtv_end.lo
#am_libvtv_la_OBJECTS =  \
#	$(am__objects_1)
##am_libvtv_la_OBJECTS =  \
##	$(am__objects_1) \
##	obstack.lo
libvtv_la_OBJECTS = $(am_libvtv_la_OBJECTS)
libvtv_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
	$(CXXFLAGS) $(libvtv_la_LDFLAGS) $(LDFLAGS) -o $@
am_libvtv_la_rpath = -rpath $(toolexeclibdir)
#am_libvtv_la_rpath = -rpath $(toolexeclibdir)
libvtv_stubs_la_LIBADD =
am__objects_2 = vtv_start.lo vtv_stubs.lo vtv_end.lo
##am_libvtv_stubs_la_OBJECTS =  \
##	$(am__objects_2)
libvtv_stubs_la_OBJECTS = $(am_libvtv_stubs_la_OBJECTS)
libvtv_stubs_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
	$(CXXFLAGS) $(libvtv_stubs_la_LDFLAGS) $(LDFLAGS) -o $@
#am_libvtv_stubs_la_rpath = -rpath $(toolexeclibdir)
DEFAULT_INCLUDES = -I. -I$(srcdir)
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
SOURCES = $(libvtv_la_SOURCES) $(libvtv_stubs_la_SOURCES)
MULTISRCTOP = 
MULTIBUILDTOP = 
MULTIDIRS = 
MULTISUBDIR = 
MULTIDO = $(MAKE)
MULTICLEAN = $(MAKE)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__libvtv_include_HEADERS_DIST = vtv_map.h vtv_malloc.h vtv_fail.h \
	vtv_set.h vtv_utils.h vtv_rts.h
HEADERS = $(libvtv_include_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = testsuite
ACLOCAL = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run aclocal-1.11
AMTAR = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run tar
AR = /usr/i486-slackware-linux/bin/ar
AS = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/as
AUTOCONF = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run autoconf
AUTOHEADER = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run autoheader
AUTOMAKE = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run automake-1.11
AWK = gawk
CC = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/ -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include   
CCAS = $(CC)
CCASFLAGS = $(CFLAGS)
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -O3 -march=amdfam10
CPP = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/ -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include    -E
CPPFLAGS = 
CXX =  /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -shared-libgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc -nostdinc++ -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src/.libs -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/libsupc++/.libs -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include   
CXXCPP =  /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -shared-libgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc -nostdinc++ -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src/.libs -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/libsupc++/.libs -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include    -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2 -O3 -march=amdfam10 -D_GNU_SOURCE
CYGPATH_W = echo
DEFS = -DPACKAGE_NAME=\"GNU\ Vtable\ Verification\ Runtime\ Library\" -DPACKAGE_TARNAME=\"libvtv\" -DPACKAGE_VERSION=\"1.0\" -DPACKAGE_STRING=\"GNU\ Vtable\ Verification\ Runtime\ Library\ 1.0\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"http://www.gnu.org/software/libvtv/\" -DPACKAGE=\"libvtv\" -DVERSION=\"1.0\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -D__EXTENSIONS__=1 -D_ALL_SOURCE=1 -D_GNU_SOURCE=1 -D_POSIX_PTHREAD_SEMANTICS=1 -D_TANDEM_SOURCE=1 -DHAVE_SECURE_GETENV=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\"
DEPDIR = .deps
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EXEEXT = 
FGREP = /usr/bin/grep -F
GREP = /usr/bin/grep
INSTALL = /usr/bin/ginstall -c
INSTALL_DATA = /usr/bin/ginstall -c -m 644
INSTALL_PROGRAM = /usr/bin/ginstall -c
INSTALL_SCRIPT = /usr/bin/ginstall -c
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/collect-ld
LDFLAGS = 
LIBOBJS = 
LIBS = 
LIBSTDCXX_RAW_CXX_CXXFLAGS =     -I$(top_builddir)/../libstdc++-v3/include     -I$(top_builddir)/../libstdc++-v3/include/$(target_noncanonical)     -I$(top_srcdir)/../libstdc++-v3/libsupc++
LIBSTDCXX_RAW_CXX_LDFLAGS =     $(top_builddir)/../libstdc++-v3/src/libstdc++.la
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = lipo
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = makeinfo --split-size=5000000
MKDIR_P = /usr/bin/mkdir -p
NM = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/nm
NMEDIT = 
OBJDUMP = /usr/i486-slackware-linux/bin/objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = libvtv
PACKAGE_BUGREPORT = 
PACKAGE_NAME = GNU Vtable Verification Runtime Library
PACKAGE_STRING = GNU Vtable Verification Runtime Library 1.0
PACKAGE_TARNAME = libvtv
PACKAGE_URL = http://www.gnu.org/software/libvtv/
PACKAGE_VERSION = 1.0
PATH_SEPARATOR = :
RANLIB = /usr/i486-slackware-linux/bin/ranlib
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = /usr/i486-slackware-linux/bin/strip
VERSION = 1.0
XCFLAGS = -D_GNU_SOURCE -Wall -Wextra -fno-exceptions
abs_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libvtv
abs_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libvtv/../../../gcc-5.1.0/libvtv
abs_top_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libvtv
abs_top_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libvtv/../../../gcc-5.1.0/libvtv
ac_ct_CC = 
ac_ct_CXX = 
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i486-slackware-linux-gnu
build_alias = i486-slackware-linux
build_cpu = i486
build_os = linux-gnu
build_vendor = slackware
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
enable_shared = yes
enable_static = yes
exec_prefix = ${prefix}
host = i486-slackware-linux-gnu
host_alias = i486-slackware-linux
host_cpu = i486
host_os = linux-gnu
host_vendor = slackware
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = /usr/info
install_sh = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/install-sh
libdir = /usr/lib
libexecdir = ${exec_prefix}/libexec
libtool_VERSION = 1:0:0
libvtv_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libvtv
libvtv_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/libvtv
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lt_host_flags = 
mandir = /usr/man
mkdir_p = /usr/bin/mkdir -p
multi_basedir = ../../../gcc-5.1.0/libvtv/..
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,y,y,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = ../../../gcc-5.1.0/libvtv
sysconfdir = ${prefix}/etc
target = i486-slackware-linux-gnu
target_alias = i486-slackware-linux
target_cpu = i486
target_noncanonical = i486-slackware-linux
target_os = linux-gnu
target_vendor = slackware
toolexecdir = $(libdir)/gcc-lib/$(target_alias)
toolexeclibdir = $(libdir)
top_build_prefix = 
top_builddir = .
top_srcdir = ../../../gcc-5.1.0/libvtv
toplevel_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libvtv/..
toplevel_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/libvtv/..
SUBDIRS = 
#SUBDIRS = testsuite
ACLOCAL_AMFLAGS = -I .. -I ../config

# May be used by toolexeclibdir.
gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
AM_CPPFLAGS = -I$(top_srcdir)/../include
AM_CFLAGS = $(XCFLAGS)
AM_CCASFLAGS = $(XCFLAGS)
AM_CXXFLAGS = $(XCFLAGS) $(LIBSTDCXX_RAW_CXX_CXXFLAGS) \
	-Wl,-u_vtable_map_vars_start,-u_vtable_map_vars_end
toolexeclib_LTLIBRARIES = libvtv.la
#toolexeclib_LTLIBRARIES = libvtv.la libvtv_stubs.la
vtv_headers = \
	vtv_map.h \
	vtv_malloc.h \
	vtv_fail.h \
	vtv_set.h \
	vtv_utils.h \
	vtv_rts.h

vtv_sources = \
	vtv_start.c \
        vtv_malloc.cc \
        vtv_rts.cc \
        vtv_utils.cc \
	vtv_end.c

vtv_stubs_sources = \
	vtv_start.c \
	vtv_stubs.cc \
	vtv_end.c

libvtv_includedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/include

# Link in vtv_start and vtv_end. 
BUILT_SOURCES = vtv_start.c vtv_end.c
#libvtv_la_LIBADD = -lpsapi
#libvtv_la_LDFLAGS = $(lt_host_flags)
#libvtv_stubs_la_LDFLAGS = $(lt_host_flags)
libvtv_la_SOURCES = 
#libvtv_la_SOURCES = $(vtv_sources)
##libvtv_la_SOURCES = $(vtv_sources) obstack.c
##libvtv_stubs_la_SOURCES = $(vtv_stubs_sources)
libvtv_include_HEADERS = 
#libvtv_include_HEADERS = $(vtv_headers)

# Least ordering for dependencies mean linking w/o libstdc++ for as
# long as the development of libvtv does not absolutely require it.
CXXVTV = $(CC_FOR_TARGET)
CXXLD = $(CC_FOR_TARGET)
LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CXXVTV) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)

CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CXXVTV) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@

all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .c .cc .lo .o .obj
am--refresh:
	@:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: # $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)"
	@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \
	}

uninstall-toolexeclibLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \
	done

clean-toolexeclibLTLIBRARIES:
	-test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
	@list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libvtv.la: $(libvtv_la_OBJECTS) $(libvtv_la_DEPENDENCIES) 
	$(libvtv_la_LINK) $(am_libvtv_la_rpath) $(libvtv_la_OBJECTS) $(libvtv_la_LIBADD) $(LIBS)
libvtv_stubs.la: $(libvtv_stubs_la_OBJECTS) $(libvtv_stubs_la_DEPENDENCIES) 
	$(libvtv_stubs_la_LINK) $(am_libvtv_stubs_la_rpath) $(libvtv_stubs_la_OBJECTS) $(libvtv_stubs_la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

include ./$(DEPDIR)/obstack.Plo
include ./$(DEPDIR)/vtv_end.Plo
include ./$(DEPDIR)/vtv_malloc.Plo
include ./$(DEPDIR)/vtv_rts.Plo
include ./$(DEPDIR)/vtv_start.Plo
include ./$(DEPDIR)/vtv_stubs.Plo
include ./$(DEPDIR)/vtv_utils.Plo

.c.o:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c $<

.c.obj:
	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
#	source='$<' object='$@' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
#	$(LTCOMPILE) -c -o $@ $<

.cc.o:
	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(CXXCOMPILE) -c -o $@ $<

.cc.obj:
	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
#	source='$<' object='$@' libtool=no \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cc.lo:
	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
#	source='$<' object='$@' libtool=yes \
#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
#	$(LTCXXCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt

# GNU Make needs to see an explicit $(MAKE) variable in the command it
# runs to enable its job server during parallel builds.  Hence the
# comments below.
all-multi:
	$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
install-multi:
	$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)

mostlyclean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
clean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
distclean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
maintainer-clean-multi:
	$(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
install-libvtv_includeHEADERS: $(libvtv_include_HEADERS)
	@$(NORMAL_INSTALL)
	test -z "$(libvtv_includedir)" || $(MKDIR_P) "$(DESTDIR)$(libvtv_includedir)"
	@list='$(libvtv_include_HEADERS)'; test -n "$(libvtv_includedir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libvtv_includedir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(libvtv_includedir)" || exit $$?; \
	done

uninstall-libvtv_includeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(libvtv_include_HEADERS)'; test -n "$(libvtv_includedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(libvtv_includedir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(libvtv_includedir)" && rm -f $$files

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(LTLIBRARIES) all-multi $(HEADERS)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(libvtv_includedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-multi clean-recursive

clean-am: clean-generic clean-libtool clean-toolexeclibLTLIBRARIES \
	mostlyclean-am

distclean: distclean-multi distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-libvtv_includeHEADERS

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am: install-multi install-toolexeclibLTLIBRARIES

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-multi maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-multi mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-libvtv_includeHEADERS \
	uninstall-toolexeclibLTLIBRARIES

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all all-multi \
	check clean-multi ctags-recursive distclean-multi install \
	install-am install-multi install-strip maintainer-clean-multi \
	mostlyclean-multi tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am all-multi am--refresh check check-am clean \
	clean-generic clean-libtool clean-multi \
	clean-toolexeclibLTLIBRARIES ctags ctags-recursive distclean \
	distclean-compile distclean-generic distclean-libtool \
	distclean-multi distclean-tags dvi dvi-am html html-am info \
	info-am install install-am install-data install-data-am \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-html install-html-am install-info install-info-am \
	install-libvtv_includeHEADERS install-man install-multi \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip install-toolexeclibLTLIBRARIES installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic maintainer-clean-multi mostlyclean \
	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
	mostlyclean-multi pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-libvtv_includeHEADERS \
	uninstall-toolexeclibLTLIBRARIES

vtv_start.c:
	rm -f $@
	$(LN_S) $(toplevel_srcdir)/libgcc/vtv_start.c $@

vtv_end.c:
	rm -f $@
	$(LN_S) $(toplevel_srcdir)/libgcc/vtv_end.c $@

#  obstack.c:
#	  rm -f $@
#	  $(LN_S) $(toplevel_srcdir)/libiberty/obstack.c $@

#  vtv_stubs.cc:
#	  rm -f $@
#	  $(LN_S) $(toplevel_srcdir)/libstdc++-v3/libsupc++/vtv_stubs.cc $@

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

PWD_COMMAND=$${PWDCMD-pwd}

# FIXME: There should be an @-sign in front of the `if'.
# Leave out until this is tested a bit more.
multi-do:
	if [ -z "$(MULTIDIRS)" ]; then \
	  true; \
	else \
	  rootpre=`${PWD_COMMAND}`/; export rootpre; \
	  srcrootpre=`cd $(srcdir); ${PWD_COMMAND}`/; export srcrootpre; \
	  lib=`echo "$${rootpre}" | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
	  compiler="$(CC)"; \
	  for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
	    dir=`echo $$i | sed -e 's/;.*$$//'`; \
	    if [ "$${dir}" = "." ]; then \
	      true; \
	    else \
	      if [ -d ../$${dir}/$${lib} ]; then \
		flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
		if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
				CFLAGS="$(CFLAGS) $${flags}" \
				CCASFLAGS="$(CCASFLAGS) $${flags}" \
				FCFLAGS="$(FCFLAGS) $${flags}" \
				FFLAGS="$(FFLAGS) $${flags}" \
				ADAFLAGS="$(ADAFLAGS) $${flags}" \
				prefix="$(prefix)" \
				exec_prefix="$(exec_prefix)" \
				GCJFLAGS="$(GCJFLAGS) $${flags}" \
				GOCFLAGS="$(GOCFLAGS) $${flags}" \
				CXXFLAGS="$(CXXFLAGS) $${flags}" \
				LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
				LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
				LDFLAGS="$(LDFLAGS) $${flags}" \
				MULTIFLAGS="$${flags}" \
				DESTDIR="$(DESTDIR)" \
				INSTALL="$(INSTALL)" \
				INSTALL_DATA="$(INSTALL_DATA)" \
				INSTALL_PROGRAM="$(INSTALL_PROGRAM)" \
				INSTALL_SCRIPT="$(INSTALL_SCRIPT)" \
				$(DO)); then \
		  true; \
		else \
		  exit 1; \
		fi; \
	      else true; \
	      fi; \
	    fi; \
	  done; \
	fi

# FIXME: There should be an @-sign in front of the `if'.
# Leave out until this is tested a bit more.
multi-clean:
	if [ -z "$(MULTIDIRS)" ]; then \
	  true; \
	else \
	  lib=`${PWD_COMMAND} | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
	  for dir in : $(MULTIDIRS); do \
	    test $$dir != : || continue; \
	    if [ -f ../$${dir}/$${lib}/Makefile ]; then \
	      if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
	      then true; \
	      else exit 1; \
	      fi; \
	    else true; \
	    fi; \
	  done; \
	fi