# Makefile.in generated by automake 1.11.1 from Makefile.am. # src/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. VPATH = ../../../../gcc-5.1.0/libstdc++-v3/src pkgdatadir = $(datadir)/libstdc++ pkgincludedir = $(includedir)/libstdc++ pkglibdir = $(libdir)/libstdc++ pkglibexecdir = $(libexecdir)/libstdc++ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = i486-slackware-linux-gnu host_triplet = i486-slackware-linux-gnu target_triplet = i486-slackware-linux-gnu DIST_COMMON = $(top_srcdir)/fragment.am $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am subdir = src ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \ $(top_srcdir)/../config/enable.m4 \ $(top_srcdir)/../config/futex.m4 \ $(top_srcdir)/../config/iconv.m4 \ $(top_srcdir)/../config/lead-dot.m4 \ $(top_srcdir)/../config/lib-ld.m4 \ $(top_srcdir)/../config/lib-link.m4 \ $(top_srcdir)/../config/lib-prefix.m4 \ $(top_srcdir)/../config/lthostflags.m4 \ $(top_srcdir)/../config/multi.m4 \ $(top_srcdir)/../config/no-executables.m4 \ $(top_srcdir)/../config/override.m4 \ $(top_srcdir)/../config/stdint.m4 \ $(top_srcdir)/../config/unwind_ipinfo.m4 \ $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \ $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \ $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \ $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/../config/gc++filt.m4 \ $(top_srcdir)/../config/tls.m4 $(top_srcdir)/../config/gthr.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__installdirs = "$(DESTDIR)$(toolexeclibdir)" LTLIBRARIES = $(toolexeclib_LTLIBRARIES) am__DEPENDENCIES_1 = #am__objects_1 = compatibility-ldbl.lo am__objects_2 = compatibility.lo compatibility-debug_list.lo \ compatibility-debug_list-2.lo $(am__objects_1) am__objects_3 = compatibility-c++0x.lo compatibility-atomic-c++0x.lo \ compatibility-thread-c++0x.lo compatibility-chrono.lo \ compatibility-condvar.lo am_libstdc___la_OBJECTS = $(am__objects_2) $(am__objects_3) libstdc___la_OBJECTS = $(am_libstdc___la_OBJECTS) am_libstdc___la_rpath = -rpath $(toolexeclibdir) #am_libstdc___la_rpath = -rpath $(toolexeclibdir) libvtv_la_LIBADD = #am_libvtv_la_OBJECTS = vtv_stubs.lo libvtv_la_OBJECTS = $(am_libvtv_la_OBJECTS) #am_libvtv_la_rpath = -rpath $(toolexeclibdir) DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) depcomp = am__depfiles_maybe = CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) SOURCES = $(libstdc___la_SOURCES) $(libvtv_la_SOURCES) RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) ABI_TWEAKS_SRCDIR = config/cpu/generic ACLOCAL = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run aclocal-1.11 ALLOCATOR_H = config/allocator/new_allocator_base.h ALLOCATOR_NAME = __gnu_cxx::new_allocator AMTAR = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run tar AR = /usr/i486-slackware-linux/bin/ar AS = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/as ATOMICITY_SRCDIR = config/cpu/generic/atomicity_builtins ATOMIC_FLAGS = -march=native ATOMIC_WORD_SRCDIR = config/cpu/generic AUTOCONF = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run autoconf AUTOHEADER = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run autoheader AUTOMAKE = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/missing --run automake-1.11 AWK = gawk BASIC_FILE_CC = config/io/basic_file_stdio.cc BASIC_FILE_H = config/io/basic_file_stdio.h CC = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/ -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include CCODECVT_CC = config/locale/gnu/codecvt_members.cc CCOLLATE_CC = config/locale/gnu/collate_members.cc CCTYPE_CC = config/locale/gnu/ctype_members.cc CFLAGS = -g -O2 -O3 -march=amdfam10 CLOCALE_CC = config/locale/gnu/c_locale.cc CLOCALE_H = config/locale/gnu/c_locale.h CLOCALE_INTERNAL_H = config/locale/gnu/c++locale_internal.h CMESSAGES_CC = config/locale/gnu/messages_members.cc CMESSAGES_H = config/locale/gnu/messages_members.h CMONEY_CC = config/locale/gnu/monetary_members.cc CNUMERIC_CC = config/locale/gnu/numeric_members.cc CPP = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/ -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include -E CPPFLAGS = CPU_DEFINES_SRCDIR = config/cpu/generic CPU_OPT_BITS_RANDOM = config/cpu/i486/opt/bits/opt_random.h CPU_OPT_EXT_RANDOM = config/cpu/i486/opt/ext/opt_random.h CSTDIO_H = config/io/c_io_stdio.h CTIME_CC = config/locale/gnu/time_members.cc CTIME_H = config/locale/gnu/time_members.h CXX = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -shared-libgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc -nostdinc++ -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src/.libs -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/libsupc++/.libs -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include CXXCPP = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/xgcc -shared-libgcc -B/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc -nostdinc++ -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src/.libs -L/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/libsupc++/.libs -B/usr/i486-slackware-linux/bin/ -B/usr/i486-slackware-linux/lib/ -isystem /usr/i486-slackware-linux/include -isystem /usr/i486-slackware-linux/sys-include -E CXXFILT = /usr/bin/c++filt CXXFLAGS = -g -O2 -O3 -march=amdfam10 -D_GNU_SOURCE CYGPATH_W = echo C_INCLUDE_DIR = ${glibcxx_srcdir}/include/c_global DBLATEX = no DEBUG_FLAGS = -gdwarf-4 -g3 -O0 DEFS = -DHAVE_CONFIG_H DOT = no DOXYGEN = yes DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /usr/bin/grep -E ERROR_CONSTANTS_SRCDIR = config/os/generic EXEEXT = EXTRA_CXX_FLAGS = FGREP = /usr/bin/grep -F GLIBCXX_INCLUDES = -I/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/include/i486-slackware-linux -I/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/include -I/gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/libstdc++-v3/libsupc++ GLIBCXX_LIBS = GREP = /usr/bin/grep HWCAP_FLAGS = INSTALL = /usr/bin/ginstall -c INSTALL_DATA = /usr/bin/ginstall -c -m 644 INSTALL_PROGRAM = /usr/bin/ginstall -c INSTALL_SCRIPT = /usr/bin/ginstall -c INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LD = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/collect-ld LDFLAGS = LIBICONV = LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = lipo LN_S = ln -s LTLIBICONV = LTLIBOBJS = MAINT = # MAKEINFO = makeinfo --split-size=5000000 --split-size=5000000 MKDIR_P = /usr/bin/mkdir -p NM = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/./gcc/nm NMEDIT = OBJDUMP = /usr/i486-slackware-linux/bin/objdump OBJEXT = o OPTIMIZE_CXXFLAGS = OPT_LDFLAGS = -Wl,-O1 -Wl,-z,relro OS_INC_SRCDIR = config/os/gnu-linux OTOOL = OTOOL64 = PACKAGE = libstdc++ PACKAGE_BUGREPORT = PACKAGE_NAME = package-unused PACKAGE_STRING = package-unused version-unused PACKAGE_TARNAME = libstdc++ PACKAGE_URL = PACKAGE_VERSION = version-unused PATH_SEPARATOR = : PDFLATEX = yes RANLIB = /usr/i486-slackware-linux/bin/ranlib SECTION_FLAGS = -ffunction-sections -fdata-sections SECTION_LDFLAGS = -Wl,--gc-sections SED = /usr/bin/sed SET_MAKE = SHELL = /bin/sh STRIP = /usr/i486-slackware-linux/bin/strip SYMVER_FILE = config/abi/pre/gnu.ver TOPLEVEL_INCLUDES = -I$(toplevel_srcdir)/libgcc USE_NLS = yes VERSION = version-unused VTV_CXXFLAGS = VTV_CXXLINKFLAGS = VTV_PCH_CXXFLAGS = WARN_FLAGS = -Wall -Wextra -Wwrite-strings -Wcast-qual -Wabi WERROR = XMLLINT = yes XSLTPROC = yes XSL_STYLE_DIR = abs_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/src abs_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/../../../gcc-5.1.0/libstdc++-v3/src abs_top_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3 abs_top_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/../../../gcc-5.1.0/libstdc++-v3 ac_ct_CC = ac_ct_CXX = ac_ct_DUMPBIN = am__leading_dot = . am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - baseline_dir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/libstdc++-v3/config/abi/post/i486-linux-gnu baseline_subdir_switch = --print-multi-directory bindir = ${exec_prefix}/bin build = i486-slackware-linux-gnu build_alias = i486-slackware-linux build_cpu = i486 build_os = linux-gnu build_vendor = slackware builddir = . check_msgfmt = yes datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} enable_shared = yes enable_static = yes exec_prefix = ${prefix} glibcxx_MOFILES = de.mo fr.mo glibcxx_PCHFLAGS = -include bits/stdc++.h glibcxx_POFILES = de.po fr.po glibcxx_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3 glibcxx_compiler_pic_flag = -fPIC -DPIC glibcxx_compiler_shared_flag = -D_GLIBCXX_SHARED glibcxx_cxx98_abi = 0 glibcxx_localedir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/po/share/locale glibcxx_lt_pic_flag = -prefer-pic glibcxx_prefixdir = /usr glibcxx_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/libstdc++-v3 glibcxx_toolexecdir = ${libdir}/gcc/${host_alias} glibcxx_toolexeclibdir = ${libdir} gxx_include_dir = ${prefix}/include/c++/${gcc_version} host = i486-slackware-linux-gnu host_alias = i486-slackware-linux host_cpu = i486 host_os = linux-gnu host_vendor = slackware htmldir = ${docdir} includedir = ${prefix}/include infodir = /usr/info install_sh = ${SHELL} /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/install-sh libdir = /usr/lib libexecdir = ${exec_prefix}/libexec libtool_VERSION = 6:21:0 localedir = ${datarootdir}/locale localstatedir = ${prefix}/var lt_host_flags = mandir = /usr/man mkdir_p = /usr/bin/mkdir -p multi_basedir = ../../../gcc-5.1.0/libstdc++-v3/.. oldincludedir = /usr/include pdfdir = ${docdir} port_specific_symbol_files = $(top_srcdir)/config/abi/pre/float128.ver prefix = /usr program_transform_name = s,y,y, psdir = ${docdir} python_mod_dir = /lib/python2.7/site-packages sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = ../../../../gcc-5.1.0/libstdc++-v3/src sysconfdir = ${prefix}/etc target = i486-slackware-linux-gnu target_alias = i486-slackware-linux target_cpu = i486 target_os = linux-gnu target_vendor = slackware thread_header = gthr-posix.h top_build_prefix = ../ top_builddir = .. top_srcdir = ../../../../gcc-5.1.0/libstdc++-v3 toplevel_builddir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc.build.lnx/i486-slackware-linux/libstdc++-v3/.. toplevel_srcdir = /gcc-daa6516a4b0f301756ec3adbd762e11e/gcc-5.1.0/libstdc++-v3/.. # May be used by various substitution variables. gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER) MAINT_CHARSET = latin1 mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs PWD_COMMAND = $${PWDCMD-pwd} STAMP = echo timestamp > toolexecdir = $(glibcxx_toolexecdir) toolexeclibdir = $(glibcxx_toolexeclibdir) #WERROR_FLAG = WERROR_FLAG = $(WERROR) #XTEMPLATE_FLAGS = XTEMPLATE_FLAGS = -fno-implicit-templates # These bits are all figured out from configure. Look in acinclude.m4 # or configure.ac to see how they are set. See GLIBCXX_EXPORT_FLAGS. CONFIG_CXXFLAGS = \ $(SECTION_FLAGS) $(HWCAP_FLAGS) -frandom-seed=$@ WARN_CXXFLAGS = \ $(WARN_FLAGS) $(WERROR_FLAG) -fdiagnostics-show-location=once # -I/-D flags to pass when compiling. AM_CPPFLAGS = $(GLIBCXX_INCLUDES) SUBDIRS = c++98 c++11 toolexeclib_LTLIBRARIES = libstdc++.la # Cross compiler support. #toolexeclib_LTLIBRARIES = libvtv.la libstdc++.la #libvtv_la_SOURCES = vtv_stubs.cc #libvtv_la_LDFLAGS = $(lt_host_flags) #libvtv_la_AM_CXXFLAGS = \ # $(glibcxx_compiler_pic_flag) \ # $(XTEMPLATE_FLAGS) \ # -Wl,-u_vtable_map_vars_start,-u_vtable_map_vars_end \ # $(WARN_CXXFLAGS) $(OPTIMIZE_CXXFLAGS) $(CONFIG_CXXFLAGS) #libvtv_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \ # $(LIBTOOLFLAGS) --mode=link $(CXXLD) $(libvtv_la_AM_CXXFLAGS) \ # $(CXXFLAGS) $(libvtv_la_LDFLAGS) $(LDFLAGS) -o $@ ldbl_compat_sources = #ldbl_compat_sources = compatibility-ldbl.cc parallel_compat_sources = \ compatibility-parallel_list.cc compatibility-parallel_list-2.cc cxx98_sources = \ compatibility.cc \ compatibility-debug_list.cc \ compatibility-debug_list-2.cc \ ${ldbl_compat_sources} cxx11_sources = \ compatibility-c++0x.cc \ compatibility-atomic-c++0x.cc \ compatibility-thread-c++0x.cc \ compatibility-chrono.cc \ compatibility-condvar.cc libstdc___la_SOURCES = $(cxx98_sources) $(cxx11_sources) libstdc___la_LIBADD = \ $(GLIBCXX_LIBS) \ $(top_builddir)/libsupc++/libsupc++convenience.la \ $(top_builddir)/src/c++98/libc++98convenience.la \ $(top_builddir)/src/c++11/libc++11convenience.la libstdc___la_DEPENDENCIES = \ ${version_dep} \ $(top_builddir)/libsupc++/libsupc++convenience.la \ $(top_builddir)/src/c++98/libc++98convenience.la \ $(top_builddir)/src/c++11/libc++11convenience.la libstdc___la_LDFLAGS = \ -version-info $(libtool_VERSION) ${version_arg} -lm libstdc___la_LINK = $(CXXLINK) $(libstdc___la_LDFLAGS) # A note on compatibility and static libraries. # # static lib == linked against only this version, should not need compat # shared lib == linked against potentially all compat versions # # Thus, the shared libs have more compat symbols, which can be found # segregated in the sources with -D_GLIBCXX_SHARED. # # In the sub-directories of libsupc++, src/c++98, src/c++11, only # -prefer-pic objects are generated for the convenience libraries. # # In the main src directory, make shared and static objects just for # the compat libraries. Shared objects are compiled with -prefer-pic # -D_GLIBCXX_SHARED and in the .libs sub-directory, static objects are # compiled with -prefer-pic (ie, -fPIC but not -D_GLIBCXX_SHARED) and # the main src directory. # # Why are objects destined for libstdc++.a compiled with -fPIC? First, # because -fPIC is not harmful to use for objects destined for static # libraries. In addition, using -fPIC will allow the use of static # libstdc++.a in the creation of other C++ shared libraries. # AM_CXXFLAGS needs to be in each sub-directory so that it can be # modified in a per-library or per-sub-library way. Need to manually # set this option because CONFIG_CXXFLAGS has to be after # OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden # as the occasion calls for it. AM_CXXFLAGS = \ $(glibcxx_compiler_pic_flag) \ $(XTEMPLATE_FLAGS) $(VTV_CXXFLAGS) \ $(WARN_CXXFLAGS) $(OPTIMIZE_CXXFLAGS) $(CONFIG_CXXFLAGS) # Libtool notes # 1) In general, libtool expects an argument such as `--tag=CXX' when # using the C++ compiler, because that will enable the settings # detected when C++ support was being configured. However, when no # such flag is given in the command line, libtool attempts to figure # it out by matching the compiler name in each configuration section # against a prefix of the command line. The problem is that, if the # compiler name and its initial flags stored in the libtool # configuration file don't match those in the command line, libtool # can't decide which configuration to use, and it gives up. The # correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe # CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to # attempt to infer which configuration to use. # # The second tag argument, `--tag disable-shared` means that libtool # only compiles each source once, for static objects. In actuality, # glibcxx_lt_pic_flag and glibcxx_compiler_shared_flag are added to # the libtool command that is used create the object, which is # suitable for shared libraries. The `--tag disable-shared` must be # placed after --tag CXX lest things CXX undo the affect of # disable-shared. # 2) Need to explicitly set LTCXXCOMPILE so that EXTRA_CXX_FLAGS is # last. (That way, things like -O2 passed down from the toplevel can # be overridden by --enable-debug and --enable-cxx-flags.) LTCXXCOMPILE = \ $(LIBTOOL) --tag CXX \ $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=compile $(CXX) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) $(EXTRA_CXX_FLAGS) LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS)) # 3) We'd have a problem when building the shared libstdc++ object if # the rules automake generates would be used. We cannot allow g++ to # be used since this would add -lstdc++ to the link line which of # course is problematic at this point. So, we get the top-level # directory to configure libstdc++-v3 to use gcc as the C++ # compilation driver. CXXLINK = \ $(LIBTOOL) --tag CXX \ $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ --mode=link $(CXX) \ $(VTV_CXXLINKFLAGS) \ $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@ CLEANFILES = libstdc++-symbols.ver $(version_dep) #version_arg = -Wl,-exported_symbols_list,libstdc++-symbols.explist #version_arg = #version_arg = -Wl,--version-script=libstdc++-symbols.ver version_arg = -Wl,--version-script=libstdc++-symbols.ver #version_arg = -Wl,-M,libstdc++-symbols.ver-sun #version_dep = libstdc++-symbols.explist #version_dep = #version_dep = libstdc++-symbols.ver version_dep = libstdc++-symbols.ver #version_dep = libstdc++-symbols.ver-sun STAMP_DEBUG = # Added rules. # 1 debug library # 2 supra-convenience library #STAMP_DEBUG = build-debug STAMP_INSTALL_DEBUG = #STAMP_INSTALL_DEBUG = install-debug CLEAN_DEBUG = #CLEAN_DEBUG = debug # Build a debug variant. # Take care to fix all possibly-relative paths. debugdir = ${glibcxx_builddir}/src/debug all: all-recursive .SUFFIXES: .SUFFIXES: .cc .lo .o .obj $(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps src/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign --ignore-deps src/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: # $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): # $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES) @$(NORMAL_INSTALL) test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" || { \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \ } uninstall-toolexeclibLTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \ done clean-toolexeclibLTLIBRARIES: -test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES) @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ test "$$dir" != "$$p" || dir=.; \ echo "rm -f \"$${dir}/so_locations\""; \ rm -f "$${dir}/so_locations"; \ done libstdc++.la: $(libstdc___la_OBJECTS) $(libstdc___la_DEPENDENCIES) $(libstdc___la_LINK) $(am_libstdc___la_rpath) $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD) $(LIBS) libvtv.la: $(libvtv_la_OBJECTS) $(libvtv_la_DEPENDENCIES) $(libvtv_la_LINK) $(am_libvtv_la_rpath) $(libvtv_la_OBJECTS) $(libvtv_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c .cc.o: $(CXXCOMPILE) -c -o $@ $< .cc.obj: $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` .cc.lo: $(LTCXXCOMPILE) -c -o $@ $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags check-am: all-am check: check-recursive all-am: Makefile $(LTLIBRARIES) all-local installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(toolexeclibdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool clean-local \ clean-toolexeclibLTLIBRARIES mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-data-local install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-toolexeclibLTLIBRARIES install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-toolexeclibLTLIBRARIES .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ install-am install-strip tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am all-local check check-am clean clean-generic \ clean-libtool clean-local clean-toolexeclibLTLIBRARIES ctags \ ctags-recursive distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags dvi dvi-am html html-am info \ info-am install install-am install-data install-data-am \ install-data-local install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip \ install-toolexeclibLTLIBRARIES installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ uninstall-toolexeclibLTLIBRARIES #vtv_stubs.cc: # rm -f $@ # $(LN_S) $(toplevel_srcdir)/libstdc++-v3/libsupc++/vtv_stubs.cc $@ vpath % $(top_srcdir)/src/c++98 vpath % $(top_srcdir)/src/c++11 # Use special rules for compatibility-ldbl.cc compilation, as we need to # pass -mlong-double-64. #compatibility-ldbl.lo: compatibility-ldbl.cc # $(LTCXXCOMPILE) -mlong-double-64 -c $< #compatibility-ldbl.o: compatibility-ldbl.cc # $(CXXCOMPILE) -mlong-double-64 -c $< # Use special rules for C++11 files/objects. compatibility-c++0x.lo: compatibility-c++0x.cc $(LTCXXCOMPILE) -std=gnu++11 -c $< compatibility-c++0x.o: compatibility-c++0x.cc $(CXXCOMPILE) -std=gnu++11 -c $< compatibility-atomic-c++0x.lo: compatibility-atomic-c++0x.cc $(LTCXXCOMPILE) -std=gnu++11 -c $< compatibility-atomic-c++0x.o: compatibility-atomic-c++0x.cc $(CXXCOMPILE) -std=gnu++11 -c $< compatibility-thread-c++0x.lo: compatibility-thread-c++0x.cc $(LTCXXCOMPILE) -std=gnu++11 -c $< compatibility-thread-c++0x.o: compatibility-thread-c++0x.cc $(CXXCOMPILE) -std=gnu++11 -c $< compatibility-chrono.lo: compatibility-chrono.cc $(LTCXXCOMPILE) -std=gnu++11 -c $< compatibility-chrono.o: compatibility-chrono.cc $(CXXCOMPILE) -std=gnu++11 -c $< compatibility-condvar.lo: compatibility-condvar.cc $(LTCXXCOMPILE) -std=gnu++11 -c $< compatibility-condvar.o: compatibility-condvar.cc $(CXXCOMPILE) -std=gnu++11 -c $< # Symbol versioning for shared libraries. libstdc++-symbols.ver: ${glibcxx_srcdir}/$(SYMVER_FILE) \ $(port_specific_symbol_files) cp ${glibcxx_srcdir}/$(SYMVER_FILE) $@.tmp chmod +w $@.tmp if test "x$(port_specific_symbol_files)" != x; then \ if grep '^# Appended to version file.' \ $(port_specific_symbol_files) /dev/null > /dev/null 2>&1; then \ cat $(port_specific_symbol_files) >> $@.tmp; \ else \ sed -n '1,/DO NOT DELETE/p' $@.tmp > tmp.top; \ sed -n '/DO NOT DELETE/,$$p' $@.tmp > tmp.bottom; \ cat tmp.top $(port_specific_symbol_files) tmp.bottom > $@.tmp; \ rm tmp.top tmp.bottom; \ fi; \ fi $(EGREP) -v '^[ ]*#(#| |$$)' $@.tmp | \ $(CC) -E -P -include $(CONFIG_HEADER) - > $@ || (rm -f $@ ; exit 1) rm -f $@.tmp #libstdc++-symbols.ver-sun : libstdc++-symbols.ver \ # $(toplevel_srcdir)/contrib/make_sunver.pl \ # $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD) # CXXFILT="$(CXXFILT)"; export CXXFILT; \ # perl $(toplevel_srcdir)/contrib/make_sunver.pl \ # libstdc++-symbols.ver \ # $(libstdc___la_OBJECTS:%.lo=.libs/%.o) \ # `echo $(libstdc___la_LIBADD) | \ # sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \ # > $@ || (rm -f $@ ; exit 1) #libstdc++-symbols.explist : libstdc++-symbols.ver \ # ${glibcxx_srcdir}/scripts/make_exports.pl \ # $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD) # perl ${glibcxx_srcdir}/scripts/make_exports.pl \ # libstdc++-symbols.ver \ # $(libstdc___la_OBJECTS:%.lo=.libs/%.o) \ # `echo $(libstdc___la_LIBADD) | \ # sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \ # > $@ || (rm -f $@ ; exit 1) # Control additional build primary rules. all-once: libstdc++convenience.la $(STAMP_DEBUG) install-data-once: $(STAMP_INSTALL_DEBUG) all-local: all-once install-data-local: install-data-once clean-local: rm -rf libstdc++convenience.la stamp* $(CLEAN_DEBUG) # Make a non-installed convenience library, so that --disable-static # may work. libstdc++convenience.la: $(toolexeclib_LTLIBRARIES) $(CXXLINK) $(libstdc___la_LIBADD) $(LIBS); \ if test ! -f .libs/libstdc++.a; then \ cp .libs/libstdc++convenience.a .libs/libstdc++.a; \ fi; \ echo `date` > stamp-libstdc++convenience; stamp-debug: if test ! -d ${debugdir}; then \ mkdir -p ${debugdir}; \ for d in $(SUBDIRS); do mkdir -p ${debugdir}/$$d; done; \ (cd ${debugdir}; \ sed -e 's/top_builddir = \.\./top_builddir = ..\/../' \ -e 's/top_build_prefix = \.\./top_build_prefix = ..\/../' \ -e 's/srcdir = \.\./srcdir = ..\/../' \ -e 's/VPATH = \.\./VPATH = ..\/../' \ -e 's/glibcxx_basedir = \.\./glibcxx_basedir = ..\/../' \ -e 's/MKDIR_P = \.\./MKDIR_P = ..\/../' \ < ../Makefile > Makefile ; \ for d in . $(SUBDIRS); do \ sed -e 's/top_builddir = \.\./top_builddir = ..\/../' \ -e 's/top_build_prefix = \.\./top_build_prefix = ..\/../' \ -e 's/srcdir = \.\./srcdir = ..\/../' \ -e 's/VPATH = \.\./VPATH = ..\/../' \ -e 's/glibcxx_basedir = \.\./glibcxx_basedir = ..\/../' \ -e 's/MKDIR_P = \.\./MKDIR_P = ..\/../' \ < ../$$d/Makefile > $$d/Makefile ; \ done) ; \ fi; \ echo `date` > stamp-debug; build-debug: stamp-debug (cd ${debugdir}; \ mv Makefile Makefile.tmp; \ sed -e 's,all-local: all-once,all-local:,' \ -e 's,install-data-local: install-data-once,install-data-local:,' \ -e '/vpath/!s,src/c,src/debug/c,' \ < Makefile.tmp > Makefile ; \ rm -f Makefile.tmp ; \ $(MAKE) CXXFLAGS='$(DEBUG_FLAGS)' \ toolexeclibdir=$(glibcxx_toolexeclibdir)/debug all) ; # Install debug library. install-debug: build-debug (cd ${debugdir} && $(MAKE) CXXFLAGS='$(DEBUG_FLAGS)' \ toolexeclibdir=$(glibcxx_toolexeclibdir)/debug install) ; # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: MULTISUBDIR = PWD_COMMAND=$${PWDCMD-pwd} # FIXME: There should be an @-sign in front of the `if'. # Leave out until this is tested a bit more. multi-do: if [ -z "$(MULTIDIRS)" ]; then \ true; \ else \ rootpre=`${PWD_COMMAND}`/; export rootpre; \ srcrootpre=`cd $(srcdir); ${PWD_COMMAND}`/; export srcrootpre; \ lib=`echo "$${rootpre}" | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \ compiler="$(CC)"; \ for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \ dir=`echo $$i | sed -e 's/;.*$$//'`; \ if [ "$${dir}" = "." ]; then \ true; \ else \ if [ -d ../$${dir}/$${lib} ]; then \ flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \ if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \ CFLAGS="$(CFLAGS) $${flags}" \ CCASFLAGS="$(CCASFLAGS) $${flags}" \ FCFLAGS="$(FCFLAGS) $${flags}" \ FFLAGS="$(FFLAGS) $${flags}" \ ADAFLAGS="$(ADAFLAGS) $${flags}" \ prefix="$(prefix)" \ exec_prefix="$(exec_prefix)" \ GCJFLAGS="$(GCJFLAGS) $${flags}" \ GOCFLAGS="$(GOCFLAGS) $${flags}" \ CXXFLAGS="$(CXXFLAGS) $${flags}" \ LIBCFLAGS="$(LIBCFLAGS) $${flags}" \ LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \ LDFLAGS="$(LDFLAGS) $${flags}" \ MULTIFLAGS="$${flags}" \ DESTDIR="$(DESTDIR)" \ INSTALL="$(INSTALL)" \ INSTALL_DATA="$(INSTALL_DATA)" \ INSTALL_PROGRAM="$(INSTALL_PROGRAM)" \ INSTALL_SCRIPT="$(INSTALL_SCRIPT)" \ $(DO)); then \ true; \ else \ exit 1; \ fi; \ else true; \ fi; \ fi; \ done; \ fi # FIXME: There should be an @-sign in front of the `if'. # Leave out until this is tested a bit more. multi-clean: if [ -z "$(MULTIDIRS)" ]; then \ true; \ else \ lib=`${PWD_COMMAND} | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \ for dir in : $(MULTIDIRS); do \ test $$dir != : || continue; \ if [ -f ../$${dir}/$${lib}/src/Makefile ]; then \ if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \ then true; \ else exit 1; \ fi; \ else true; \ fi; \ done; \ fi