/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* vim: set ts=8 sts=4 et sw=4 tw=99: */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "ScriptPreloader-inl.h"
#include "mozilla/ScriptPreloader.h"
#include "mozJSComponentLoader.h"
#include "mozilla/loader/ScriptCacheActors.h"

#include "mozilla/URLPreloader.h"

#include "mozilla/ArrayUtils.h"
#include "mozilla/ClearOnShutdown.h"
#include "mozilla/FileUtils.h"
#include "mozilla/Logging.h"
#include "mozilla/ScopeExit.h"
#include "mozilla/Services.h"
#include "mozilla/Unused.h"
#include "mozilla/dom/ContentChild.h"
#include "mozilla/dom/ContentParent.h"

#include "MainThreadUtils.h"
#include "nsDebug.h"
#include "nsDirectoryServiceUtils.h"
#include "nsIFile.h"
#include "nsIObserverService.h"
#include "nsJSUtils.h"
#include "nsProxyRelease.h"
#include "nsThreadUtils.h"
#include "nsXULAppAPI.h"
#include "xpcpublic.h"

#define DELAYED_STARTUP_TOPIC "browser-delayed-startup-finished"
#define DOC_ELEM_INSERTED_TOPIC "document-element-inserted"
#define CLEANUP_TOPIC "xpcom-shutdown"
#define SHUTDOWN_TOPIC "quit-application-granted"
#define CACHE_INVALIDATE_TOPIC "startupcache-invalidate"

namespace mozilla {
namespace {
static LazyLogModule gLog("ScriptPreloader");

#define LOG(level, ...) MOZ_LOG(gLog, LogLevel::level, (__VA_ARGS__))
}

using mozilla::dom::AutoJSAPI;
using mozilla::dom::ContentChild;
using mozilla::dom::ContentParent;
using namespace mozilla::loader;

ProcessType ScriptPreloader::sProcessType;


nsresult
ScriptPreloader::CollectReports(nsIHandleReportCallback* aHandleReport,
                                nsISupports* aData, bool aAnonymize)
{
    MOZ_COLLECT_REPORT(
        "explicit/script-preloader/heap/saved-scripts", KIND_HEAP, UNITS_BYTES,
        SizeOfHashEntries<ScriptStatus::Saved>(mScripts, MallocSizeOf),
        "Memory used to hold the scripts which have been executed in this "
        "session, and will be written to the startup script cache file.");

    MOZ_COLLECT_REPORT(
        "explicit/script-preloader/heap/restored-scripts", KIND_HEAP, UNITS_BYTES,
        SizeOfHashEntries<ScriptStatus::Restored>(mScripts, MallocSizeOf),
        "Memory used to hold the scripts which have been restored from the "
        "startup script cache file, but have not been executed in this session.");

    MOZ_COLLECT_REPORT(
        "explicit/script-preloader/heap/other", KIND_HEAP, UNITS_BYTES,
        ShallowHeapSizeOfIncludingThis(MallocSizeOf),
        "Memory used by the script cache service itself.");

    MOZ_COLLECT_REPORT(
        "explicit/script-preloader/non-heap/memmapped-cache", KIND_NONHEAP, UNITS_BYTES,
        mCacheData.nonHeapSizeOfExcludingThis(),
        "The memory-mapped startup script cache file.");

    return NS_OK;
}


ScriptPreloader&
ScriptPreloader::GetSingleton()
{
    static RefPtr<ScriptPreloader> singleton;

    if (!singleton) {
        if (XRE_IsParentProcess()) {
            singleton = new ScriptPreloader();
            singleton->mChildCache = &GetChildSingleton();
            Unused << singleton->InitCache();
        } else {
            singleton = &GetChildSingleton();
        }

        ClearOnShutdown(&singleton);
    }

    return *singleton;
}

// The child singleton is available in all processes, including the parent, and
// is used for scripts which are expected to be loaded into child processes
// (such as process and frame scripts), or scripts that have already been loaded
// into a child. The child caches are managed as follows:
//
// - Every startup, we open the cache file from the last session, move it to a
//  new location, and begin pre-loading the scripts that are stored in it. There
//  is a separate cache file for parent and content processes, but the parent
//  process opens both the parent and content cache files.
//
// - Once startup is complete, we write a new cache file for the next session,
//   containing only the scripts that were used during early startup, so we don't
//   waste pre-loading scripts that may not be needed.
//
// - For content processes, opening and writing the cache file is handled in the
//  parent process. The first content process of each type sends back the data
//  for scripts that were loaded in early startup, and the parent merges them and
//  writes them to a cache file.
//
// - Currently, content processes only benefit from the cache data written
//  during the *previous* session. Ideally, new content processes should probably
//  use the cache data written during this session if there was no previous cache
//  file, but I'd rather do that as a follow-up.
ScriptPreloader&
ScriptPreloader::GetChildSingleton()
{
    static RefPtr<ScriptPreloader> singleton;

    if (!singleton) {
        singleton = new ScriptPreloader();
        if (XRE_IsParentProcess()) {
            Unused << singleton->InitCache(NS_LITERAL_STRING("scriptCache-child"));
        }
        ClearOnShutdown(&singleton);
    }

    return *singleton;
}

void
ScriptPreloader::InitContentChild(ContentParent& parent)
{
    auto& cache = GetChildSingleton();

    // We want startup script data from the first process of a given type.
    // That process sends back its script data before it executes any
    // untrusted code, and then we never accept further script data for that
    // type of process for the rest of the session.
    //
    // The script data from each process type is merged with the data from the
    // parent process's frame and process scripts, and shared between all
    // content process types in the next session.
    //
    // Note that if the first process of a given type crashes or shuts down
    // before sending us its script data, we silently ignore it, and data for
    // that process type is not included in the next session's cache. This
    // should be a sufficiently rare occurrence that it's not worth trying to
    // handle specially.
    auto processType = GetChildProcessType(parent.GetRemoteType());
    bool wantScriptData = !cache.mInitializedProcesses.contains(processType);
    cache.mInitializedProcesses += processType;

    auto fd = cache.mCacheData.cloneFileDescriptor();
    // Don't send original cache data to new processes if the cache has been
    // invalidated.
    if (fd.IsValid() && !cache.mCacheInvalidated) {
        Unused << parent.SendPScriptCacheConstructor(fd, wantScriptData);
    } else {
        Unused << parent.SendPScriptCacheConstructor(NS_ERROR_FILE_NOT_FOUND, wantScriptData);
    }
}

ProcessType
ScriptPreloader::GetChildProcessType(const nsAString& remoteType)
{
    if (remoteType.EqualsLiteral(EXTENSION_REMOTE_TYPE)) {
        return ProcessType::Extension;
    }
    return ProcessType::Web;
}


namespace {

static void
TraceOp(JSTracer* trc, void* data)
{
    auto preloader = static_cast<ScriptPreloader*>(data);

    preloader->Trace(trc);
}

} // anonymous namespace

void
ScriptPreloader::Trace(JSTracer* trc)
{
    for (auto& script : IterHash(mScripts)) {
        JS::TraceEdge(trc, &script->mScript, "ScriptPreloader::CachedScript.mScript");
    }
}


ScriptPreloader::ScriptPreloader()
  : mMonitor("[ScriptPreloader.mMonitor]")
  , mSaveMonitor("[ScriptPreloader.mSaveMonitor]")
{
    if (XRE_IsParentProcess()) {
        sProcessType = ProcessType::Parent;
    } else {
        sProcessType = GetChildProcessType(dom::ContentChild::GetSingleton()->GetRemoteType());
    }

    nsCOMPtr<nsIObserverService> obs = services::GetObserverService();
    MOZ_RELEASE_ASSERT(obs);

    if (XRE_IsParentProcess()) {
        // In the parent process, we want to freeze the script cache as soon
        // as delayed startup for the first browser window has completed.
        obs->AddObserver(this, DELAYED_STARTUP_TOPIC, false);
    } else {
        // In the child process, we need to freeze the script cache before any
        // untrusted code has been executed. The insertion of the first DOM
        // document element may sometimes be earlier than is ideal, but at
        // least it should always be safe.
        obs->AddObserver(this, DOC_ELEM_INSERTED_TOPIC, false);
    }
    obs->AddObserver(this, SHUTDOWN_TOPIC, false);
    obs->AddObserver(this, CLEANUP_TOPIC, false);
    obs->AddObserver(this, CACHE_INVALIDATE_TOPIC, false);

    AutoSafeJSAPI jsapi;
    JS_AddExtraGCRootsTracer(jsapi.cx(), TraceOp, this);
}

void
ScriptPreloader::ForceWriteCacheFile()
{
    if (mSaveThread) {
        MonitorAutoLock mal(mSaveMonitor);

        // Make sure we've prepared scripts, so we don't risk deadlocking while
        // dispatching the prepare task during shutdown.
        PrepareCacheWrite();

        // Unblock the save thread, so it can start saving before we get to
        // XPCOM shutdown.
        mal.Notify();
    }
}

void
ScriptPreloader::Cleanup()
{
    if (mSaveThread) {
        MonitorAutoLock mal(mSaveMonitor);

        // Make sure the save thread is not blocked dispatching a sync task to
        // the main thread, or we will deadlock.
        MOZ_RELEASE_ASSERT(!mBlockedOnSyncDispatch);

        while (!mSaveComplete && mSaveThread) {
            mal.Wait();
        }
    }

    // Wait for any pending parses to finish before clearing the mScripts
    // hashtable, since the parse tasks depend on memory allocated by those
    // scripts.
    {
        MonitorAutoLock mal(mMonitor);
        FinishPendingParses(mal);

        mScripts.Clear();
    }

    AutoSafeJSAPI jsapi;
    JS_RemoveExtraGCRootsTracer(jsapi.cx(), TraceOp, this);

    UnregisterWeakMemoryReporter(this);
}

void
ScriptPreloader::InvalidateCache()
{
    mMonitor.AssertNotCurrentThreadOwns();
    MonitorAutoLock mal(mMonitor);

    mCacheInvalidated = true;

    // Wait for pending off-thread parses to finish, since they depend on the
    // memory allocated by our CachedScripts, and can't be canceled
    // asynchronously.
    FinishPendingParses(mal);

    // Pending scripts should have been cleared by the above, and new parses
    // should not have been queued.
    MOZ_ASSERT(mParsingScripts.empty());
    MOZ_ASSERT(mParsingSources.empty());
    MOZ_ASSERT(mPendingScripts.isEmpty());

    for (auto& script : IterHash(mScripts))
        script.Remove();

    // If we've already finished saving the cache at this point, start a new
    // delayed save operation. This will write out an empty cache file in place
    // of any cache file we've already written out this session, which will
    // prevent us from falling back to the current session's cache file on the
    // next startup.
    if (mSaveComplete && mChildCache) {
        mSaveComplete = false;

        // Make sure scripts are prepared to avoid deadlock when invalidating
        // the cache during shutdown.
        PrepareCacheWriteInternal();

        Unused << NS_NewNamedThread("SaveScripts",
                                    getter_AddRefs(mSaveThread), this);
    }
}

nsresult
ScriptPreloader::Observe(nsISupports* subject, const char* topic, const char16_t* data)
{
    nsCOMPtr<nsIObserverService> obs = services::GetObserverService();
    if (!strcmp(topic, DELAYED_STARTUP_TOPIC)) {
        obs->RemoveObserver(this, DELAYED_STARTUP_TOPIC);

        MOZ_ASSERT(XRE_IsParentProcess());

        mStartupFinished = true;

        if (mChildCache) {
            Unused << NS_NewNamedThread("SaveScripts",
                                        getter_AddRefs(mSaveThread), this);
        }
    } else if (!strcmp(topic, DOC_ELEM_INSERTED_TOPIC)) {
        obs->RemoveObserver(this, DOC_ELEM_INSERTED_TOPIC);

        MOZ_ASSERT(XRE_IsContentProcess());

        mStartupFinished = true;

        if (mChildActor) {
            mChildActor->SendScriptsAndFinalize(mScripts);
        }
    } else if (!strcmp(topic, SHUTDOWN_TOPIC)) {
        ForceWriteCacheFile();
    } else if (!strcmp(topic, CLEANUP_TOPIC)) {
        Cleanup();
    } else if (!strcmp(topic, CACHE_INVALIDATE_TOPIC)) {
        InvalidateCache();
    }

    return NS_OK;
}


Result<nsCOMPtr<nsIFile>, nsresult>
ScriptPreloader::GetCacheFile(const nsAString& suffix)
{
    nsCOMPtr<nsIFile> cacheFile;
    MOZ_TRY(mProfD->Clone(getter_AddRefs(cacheFile)));

    MOZ_TRY(cacheFile->AppendNative(NS_LITERAL_CSTRING("startupCache")));
    Unused << cacheFile->Create(nsIFile::DIRECTORY_TYPE, 0777);

    MOZ_TRY(cacheFile->Append(mBaseName + suffix));

    return Move(cacheFile);
}

static const uint8_t MAGIC[] = "mozXDRcachev001";

Result<Ok, nsresult>
ScriptPreloader::OpenCache()
{
    MOZ_TRY(NS_GetSpecialDirectory("ProfLDS", getter_AddRefs(mProfD)));

    nsCOMPtr<nsIFile> cacheFile;
    MOZ_TRY_VAR(cacheFile, GetCacheFile(NS_LITERAL_STRING(".bin")));

    bool exists;
    MOZ_TRY(cacheFile->Exists(&exists));
    if (exists) {
        MOZ_TRY(cacheFile->MoveTo(nullptr, mBaseName + NS_LITERAL_STRING("-current.bin")));
    } else {
        MOZ_TRY(cacheFile->SetLeafName(mBaseName + NS_LITERAL_STRING("-current.bin")));
        MOZ_TRY(cacheFile->Exists(&exists));
        if (!exists) {
            return Err(NS_ERROR_FILE_NOT_FOUND);
        }
    }

    MOZ_TRY(mCacheData.init(cacheFile));

    return Ok();
}

// Opens the script cache file for this session, and initializes the script
// cache based on its contents. See WriteCache for details of the cache file.
Result<Ok, nsresult>
ScriptPreloader::InitCache(const nsAString& basePath)
{
    mCacheInitialized = true;
    mBaseName = basePath;

    RegisterWeakMemoryReporter(this);

    if (!XRE_IsParentProcess()) {
        return Ok();
    }

    // Grab the compilation scope before initializing the URLPreloader, since
    // it's not safe to run component loader code during its critical section.
    AutoSafeJSAPI jsapi;
    JS::RootedObject scope(jsapi.cx(), CompilationScope(jsapi.cx()));

    // Note: Code on the main thread *must not access Omnijar in any way* until
    // this AutoBeginReading guard is destroyed.
    URLPreloader::AutoBeginReading abr;

    MOZ_TRY(OpenCache());

    return InitCacheInternal(scope);
}

Result<Ok, nsresult>
ScriptPreloader::InitCache(const Maybe<ipc::FileDescriptor>& cacheFile, ScriptCacheChild* cacheChild)
{
    MOZ_ASSERT(XRE_IsContentProcess());

    mCacheInitialized = true;
    mChildActor = cacheChild;

    RegisterWeakMemoryReporter(this);

    if (cacheFile.isNothing()){
        return Ok();
    }

    MOZ_TRY(mCacheData.init(cacheFile.ref()));

    return InitCacheInternal();
}

Result<Ok, nsresult>
ScriptPreloader::InitCacheInternal(JS::HandleObject scope)
{
    auto size = mCacheData.size();

    uint32_t headerSize;
    if (size < sizeof(MAGIC) + sizeof(headerSize)) {
        return Err(NS_ERROR_UNEXPECTED);
    }

    auto data = mCacheData.get<uint8_t>();
    auto end = data + size;

    if (memcmp(MAGIC, data.get(), sizeof(MAGIC))) {
        return Err(NS_ERROR_UNEXPECTED);
    }
    data += sizeof(MAGIC);

    headerSize = LittleEndian::readUint32(data.get());
    data += sizeof(headerSize);

    if (data + headerSize > end) {
        return Err(NS_ERROR_UNEXPECTED);
    }

    {
        auto cleanup = MakeScopeExit([&] () {
            mScripts.Clear();
        });

        LinkedList<CachedScript> scripts;

        Range<uint8_t> header(data, data + headerSize);
        data += headerSize;

        InputBuffer buf(header);

        size_t offset = 0;
        while (!buf.finished()) {
            auto script = MakeUnique<CachedScript>(*this, buf);
            MOZ_RELEASE_ASSERT(script);

            auto scriptData = data + script->mOffset;
            if (scriptData + script->mSize > end) {
                return Err(NS_ERROR_UNEXPECTED);
            }

            // Make sure offsets match what we'd expect based on script ordering and
            // size, as a basic sanity check.
            if (script->mOffset != offset) {
                return Err(NS_ERROR_UNEXPECTED);
            }
            offset += script->mSize;

            script->mXDRRange.emplace(scriptData, scriptData + script->mSize);

            // Don't pre-decode the script unless it was used in this process type during the
            // previous session.
            if (script->mOriginalProcessTypes.contains(CurrentProcessType())) {
                scripts.insertBack(script.get());
            } else {
                script->mReadyToExecute = true;
            }

            mScripts.Put(script->mCachePath, script.get());
            Unused << script.release();
        }

        if (buf.error()) {
            return Err(NS_ERROR_UNEXPECTED);
        }

        mPendingScripts = Move(scripts);
        cleanup.release();
    }

    DecodeNextBatch(OFF_THREAD_FIRST_CHUNK_SIZE, scope);
    return Ok();
}

void
ScriptPreloader::PrepareCacheWriteInternal()
{
    MOZ_ASSERT(NS_IsMainThread());

    mMonitor.AssertCurrentThreadOwns();

    auto cleanup = MakeScopeExit([&] () {
        if (mChildCache) {
            mChildCache->PrepareCacheWrite();
        }
    });

    if (mDataPrepared) {
        return;
    }

    AutoSafeJSAPI jsapi;
    bool found = false;
    for (auto& script : IterHash(mScripts, Match<ScriptStatus::Saved>())) {
        // Don't write any scripts that are also in the child cache. They'll be
        // loaded from the child cache in that case, so there's no need to write
        // them twice.
        CachedScript* childScript = mChildCache ? mChildCache->mScripts.Get(script->mCachePath) : nullptr;
        if (childScript && !childScript->mProcessTypes.isEmpty()) {
            childScript->UpdateLoadTime(script->mLoadTime);
            childScript->mProcessTypes += script->mProcessTypes;
            script.Remove();
            continue;
        }

        if (!(script->mProcessTypes == script->mOriginalProcessTypes)) {
            // Note: EnumSet doesn't support operator!=, hence the weird form above.
            found = true;
        }

        if (!script->mSize && !script->XDREncode(jsapi.cx())) {
            script.Remove();
        }
    }

    if (!found) {
        mSaveComplete = true;
        return;
    }

    mDataPrepared = true;
}

void
ScriptPreloader::PrepareCacheWrite()
{
    MonitorAutoLock mal(mMonitor);

    PrepareCacheWriteInternal();
}

// Writes out a script cache file for the scripts accessed during early
// startup in this session. The cache file is a little-endian binary file with
// the following format:
//
// - A uint32 containing the size of the header block.
//
// - A header entry for each file stored in the cache containing:
//   - The URL that the script was originally read from.
//   - Its cache key.
//   - The offset of its XDR data within the XDR data block.
//   - The size of its XDR data in the XDR data block.
//   - A bit field describing which process types the script is used in.
//
// - A block of XDR data for the encoded scripts, with each script's data at
//   an offset from the start of the block, as specified above.
Result<Ok, nsresult>
ScriptPreloader::WriteCache()
{
    MOZ_ASSERT(!NS_IsMainThread());

    if (!mDataPrepared && !mSaveComplete) {
        MOZ_ASSERT(!mBlockedOnSyncDispatch);
        mBlockedOnSyncDispatch = true;

        MonitorAutoUnlock mau(mSaveMonitor);

        NS_DispatchToMainThread(
          NewRunnableMethod("ScriptPreloader::PrepareCacheWrite",
                            this,
                            &ScriptPreloader::PrepareCacheWrite),
          NS_DISPATCH_SYNC);
    }

    mBlockedOnSyncDispatch = false;

    if (mSaveComplete) {
        // If we don't have anything we need to save, we're done.
        return Ok();
    }

    nsCOMPtr<nsIFile> cacheFile;
    MOZ_TRY_VAR(cacheFile, GetCacheFile(NS_LITERAL_STRING("-new.bin")));

    bool exists;
    MOZ_TRY(cacheFile->Exists(&exists));
    if (exists) {
        MOZ_TRY(cacheFile->Remove(false));
    }

    {
        AutoFDClose fd;
        MOZ_TRY(cacheFile->OpenNSPRFileDesc(PR_WRONLY | PR_CREATE_FILE, 0644, &fd.rwget()));

        // We also need to hold mMonitor while we're touching scripts in
        // mScripts, or they may be freed before we're done with them.
        mMonitor.AssertNotCurrentThreadOwns();
        MonitorAutoLock mal(mMonitor);

        nsTArray<CachedScript*> scripts;
        for (auto& script : IterHash(mScripts, Match<ScriptStatus::Saved>())) {
            scripts.AppendElement(script);
        }

        // Sort scripts by load time, with async loaded scripts before sync scripts.
        // Since async scripts are always loaded immediately at startup, it helps to
        // have them stored contiguously.
        scripts.Sort(CachedScript::Comparator());

        OutputBuffer buf;
        size_t offset = 0;
        for (auto script : scripts) {
            script->mOffset = offset;
            script->Code(buf);

            offset += script->mSize;
        }

        uint8_t headerSize[4];
        LittleEndian::writeUint32(headerSize, buf.cursor());

        MOZ_TRY(Write(fd, MAGIC, sizeof(MAGIC)));
        MOZ_TRY(Write(fd, headerSize, sizeof(headerSize)));
        MOZ_TRY(Write(fd, buf.Get(), buf.cursor()));
        for (auto script : scripts) {
            MOZ_TRY(Write(fd, script->Range().begin().get(), script->mSize));

            if (script->mScript) {
                script->FreeData();
            }
        }
    }

    MOZ_TRY(cacheFile->MoveTo(nullptr, mBaseName + NS_LITERAL_STRING(".bin")));

    return Ok();
}

// Runs in the mSaveThread thread, and writes out the cache file for the next
// session after a reasonable delay.
nsresult
ScriptPreloader::Run()
{
    MonitorAutoLock mal(mSaveMonitor);

    // Ideally wait about 10 seconds before saving, to avoid unnecessary IO
    // during early startup. But only if the cache hasn't been invalidated,
    // since that can trigger a new write during shutdown, and we don't want to
    // cause shutdown hangs.
    if (!mCacheInvalidated) {
        mal.Wait(10000);
    }

    auto result = URLPreloader::GetSingleton().WriteCache();
    Unused << NS_WARN_IF(result.isErr());

    result = WriteCache();
    Unused << NS_WARN_IF(result.isErr());

    result = mChildCache->WriteCache();
    Unused << NS_WARN_IF(result.isErr());

    mSaveComplete = true;
    NS_ReleaseOnMainThreadSystemGroup("ScriptPreloader::mSaveThread",
                                      mSaveThread.forget());

    mal.NotifyAll();
    return NS_OK;
}

void
ScriptPreloader::NoteScript(const nsCString& url, const nsCString& cachePath,
                            JS::HandleScript jsscript)
{
    // Don't bother trying to cache any URLs with cache-busting query
    // parameters.
    if (!Active() || cachePath.FindChar('?') >= 0) {
        return;
    }

    // Don't bother caching files that belong to the mochitest harness.
    NS_NAMED_LITERAL_CSTRING(mochikitPrefix, "chrome://mochikit/");
    if (StringHead(url, mochikitPrefix.Length()) == mochikitPrefix) {
        return;
    }

    auto script = mScripts.LookupOrAdd(cachePath, *this, url, cachePath, jsscript);

    if (!script->mScript) {
        MOZ_ASSERT(jsscript);
        script->mScript = jsscript;
        script->mReadyToExecute = true;
    }

    // If we don't already have bytecode for this script, and it doesn't already
    // exist in the child cache, encode it now, before it's ever executed.
    //
    // Ideally, we would like to do the encoding lazily, during idle slices.
    // There are subtle issues with encoding scripts which have already been
    // executed, though, which makes that somewhat risky. So until that
    // situation is improved, and thoroughly tested, we need to encode eagerly.
    //
    // (See also the TranscodeResult_Failure_RunOnceNotSupported failure case in
    // js::XDRScript)
    if (!script->mSize && !(mChildCache && mChildCache->mScripts.Get(cachePath))) {
        AutoSafeJSAPI jsapi;
        Unused << script->XDREncode(jsapi.cx());
    }

    script->UpdateLoadTime(TimeStamp::Now());
    script->mProcessTypes += CurrentProcessType();
}

void
ScriptPreloader::NoteScript(const nsCString& url, const nsCString& cachePath,
                            ProcessType processType, nsTArray<uint8_t>&& xdrData,
                            TimeStamp loadTime)
{
    // After data has been prepared, there's no point in noting further scripts,
    // since the cache either has already been written, or is about to be
    // written. Any time prior to the data being prepared, we can safely mutate
    // mScripts without locking. After that point, the save thread is free to
    // access it, and we can't alter it without locking.
    if (mDataPrepared) {
        return;
    }

    auto script = mScripts.LookupOrAdd(cachePath, *this, url, cachePath, nullptr);

    if (!script->HasRange()) {
        MOZ_ASSERT(!script->HasArray());

        script->mSize = xdrData.Length();
        script->mXDRData.construct<nsTArray<uint8_t>>(Forward<nsTArray<uint8_t>>(xdrData));

        auto& data = script->Array();
        script->mXDRRange.emplace(data.Elements(), data.Length());
    }

    if (!script->mSize && !script->mScript) {
        // If the content process is sending us a script entry for a script
        // which was in the cache at startup, it expects us to already have this
        // script data, so it doesn't send it.
        //
        // However, the cache may have been invalidated at this point (usually
        // due to the add-on manager installing or uninstalling a legacy
        // extension during very early startup), which means we may no longer
        // have an entry for this script. Since that means we have no data to
        // write to the new cache, and no JSScript to generate it from, we need
        // to discard this entry.
        mScripts.Remove(cachePath);
        return;
    }

    script->UpdateLoadTime(loadTime);
    script->mProcessTypes += processType;
}

JSScript*
ScriptPreloader::GetCachedScript(JSContext* cx, const nsCString& path)
{
    // If a script is used by both the parent and the child, it's stored only
    // in the child cache.
    if (mChildCache) {
        auto script = mChildCache->GetCachedScript(cx, path);
        if (script) {
            return script;
        }
    }

    auto script = mScripts.Get(path);
    if (script) {
        return WaitForCachedScript(cx, script);
    }

    return nullptr;
}

JSScript*
ScriptPreloader::WaitForCachedScript(JSContext* cx, CachedScript* script)
{
    // Check for finished operations before locking so that we can move onto
    // decoding the next batch as soon as possible after the pending batch is
    // ready. If we wait until we hit an unfinished script, we wind up having at
    // most one batch of buffered scripts, and occasionally under-running that
    // buffer.
    MaybeFinishOffThreadDecode();

    if (!script->mReadyToExecute) {
        LOG(Info, "Must wait for async script load: %s\n", script->mURL.get());
        auto start = TimeStamp::Now();

        mMonitor.AssertNotCurrentThreadOwns();
        MonitorAutoLock mal(mMonitor);

        // Check for finished operations again *after* locking, or we may race
        // against mToken being set between our last check and the time we
        // entered the mutex.
        MaybeFinishOffThreadDecode();

        if (!script->mReadyToExecute && script->mSize < MAX_MAINTHREAD_DECODE_SIZE) {
            LOG(Info, "Script is small enough to recompile on main thread\n");

            script->mReadyToExecute = true;
        } else {
            while (!script->mReadyToExecute) {
                mal.Wait();

                MonitorAutoUnlock mau(mMonitor);
                MaybeFinishOffThreadDecode();
            }
        }

        LOG(Debug, "Waited %fms\n", (TimeStamp::Now() - start).ToMilliseconds());
    }

    return script->GetJSScript(cx);
}



/* static */ void
ScriptPreloader::OffThreadDecodeCallback(void* token, void* context)
{
    auto cache = static_cast<ScriptPreloader*>(context);

    cache->mMonitor.AssertNotCurrentThreadOwns();
    MonitorAutoLock mal(cache->mMonitor);

    // First notify any tasks that are already waiting on scripts, since they'll
    // be blocking the main thread, and prevent any runnables from executing.
    cache->mToken = token;
    mal.NotifyAll();

    // If nothing processed the token, and we don't already have a pending
    // runnable, then dispatch a new one to finish the processing on the main
    // thread as soon as possible.
    if (cache->mToken && !cache->mFinishDecodeRunnablePending) {
        cache->mFinishDecodeRunnablePending = true;
        NS_DispatchToMainThread(
          NewRunnableMethod("ScriptPreloader::DoFinishOffThreadDecode",
                            cache,
                            &ScriptPreloader::DoFinishOffThreadDecode));
    }
}

void
ScriptPreloader::FinishPendingParses(MonitorAutoLock& aMal)
{
    mMonitor.AssertCurrentThreadOwns();

    mPendingScripts.clear();

    MaybeFinishOffThreadDecode();

    // Loop until all pending decode operations finish.
    while (!mParsingScripts.empty()) {
        aMal.Wait();
        MaybeFinishOffThreadDecode();
    }
}

void
ScriptPreloader::DoFinishOffThreadDecode()
{
    mFinishDecodeRunnablePending = false;
    MaybeFinishOffThreadDecode();
}

JSObject*
ScriptPreloader::CompilationScope(JSContext* cx)
{
    return mozJSComponentLoader::Get()->CompilationScope(cx);
}

void
ScriptPreloader::MaybeFinishOffThreadDecode()
{
    if (!mToken) {
        return;
    }

    auto cleanup = MakeScopeExit([&] () {
        mToken = nullptr;
        mParsingSources.clear();
        mParsingScripts.clear();

        DecodeNextBatch(OFF_THREAD_CHUNK_SIZE);
    });

    AutoSafeJSAPI jsapi;
    JSContext* cx = jsapi.cx();

    JSAutoCompartment ac(cx, CompilationScope(cx));
    JS::Rooted<JS::ScriptVector> jsScripts(cx, JS::ScriptVector(cx));

    // If this fails, we still need to mark the scripts as finished. Any that
    // weren't successfully compiled in this operation (which should never
    // happen under ordinary circumstances) will be re-decoded on the main
    // thread, and raise the appropriate errors when they're executed.
    //
    // The exception from the off-thread decode operation will be reported when
    // we pop the AutoJSAPI off the stack.
    Unused << JS::FinishMultiOffThreadScriptsDecoder(cx, mToken, &jsScripts);

    unsigned i = 0;
    for (auto script : mParsingScripts) {
        LOG(Debug, "Finished off-thread decode of %s\n", script->mURL.get());
        if (i < jsScripts.length())
            script->mScript = jsScripts[i++];
        script->mReadyToExecute = true;
    }
}

void
ScriptPreloader::DecodeNextBatch(size_t chunkSize, JS::HandleObject scope)
{
    MOZ_ASSERT(mParsingSources.length() == 0);
    MOZ_ASSERT(mParsingScripts.length() == 0);

    auto cleanup = MakeScopeExit([&] () {
        mParsingScripts.clearAndFree();
        mParsingSources.clearAndFree();
    });

    auto start = TimeStamp::Now();
    LOG(Debug, "Off-thread decoding scripts...\n");

    size_t size = 0;
    for (CachedScript* next = mPendingScripts.getFirst(); next;) {
        auto script = next;
        next = script->getNext();

        // Skip any scripts that we decoded on the main thread rather than
        // waiting for an off-thread operation to complete.
        if (script->mReadyToExecute) {
            script->remove();
            continue;
        }
        // If we have enough data for one chunk and this script would put us
        // over our chunk size limit, we're done.
        if (size > SMALL_SCRIPT_CHUNK_THRESHOLD &&
            size + script->mSize > chunkSize) {
            break;
        }
        if (!mParsingScripts.append(script) ||
            !mParsingSources.emplaceBack(script->Range(), script->mURL.get(), 0)) {
            break;
        }

        LOG(Debug, "Beginning off-thread decode of script %s (%u bytes)\n",
            script->mURL.get(), script->mSize);

        script->remove();
        size += script->mSize;
    }

    if (size == 0 && mPendingScripts.isEmpty()) {
        return;
    }

    AutoSafeJSAPI jsapi;
    JSContext* cx = jsapi.cx();
    JSAutoCompartment ac(cx, scope ? scope : CompilationScope(cx));

    JS::CompileOptions options(cx);
    options.setNoScriptRval(true)
           .setSourceIsLazy(true);

    if (!JS::CanCompileOffThread(cx, options, size) ||
        !JS::DecodeMultiOffThreadScripts(cx, options, mParsingSources,
                                         OffThreadDecodeCallback,
                                         static_cast<void*>(this))) {
        // If we fail here, we don't move on to process the next batch, so make
        // sure we don't have any other scripts left to process.
        MOZ_ASSERT(mPendingScripts.isEmpty());
        for (auto script : mPendingScripts) {
            script->mReadyToExecute = true;
        }

        LOG(Info, "Can't decode %lu bytes of scripts off-thread", (unsigned long)size);
        for (auto script : mParsingScripts) {
            script->mReadyToExecute = true;
        }
        return;
    }

    cleanup.release();

    LOG(Debug, "Initialized decoding of %u scripts (%u bytes) in %fms\n",
        (unsigned)mParsingSources.length(), (unsigned)size, (TimeStamp::Now() - start).ToMilliseconds());
}


ScriptPreloader::CachedScript::CachedScript(ScriptPreloader& cache, InputBuffer& buf)
    : mCache(cache)
{
    Code(buf);

    // Swap the mProcessTypes and mOriginalProcessTypes values, since we want to
    // start with an empty set of processes loaded into for this session, and
    // compare against last session's values later.
    mOriginalProcessTypes = mProcessTypes;
    mProcessTypes = {};
}

bool
ScriptPreloader::CachedScript::XDREncode(JSContext* cx)
{
    JSAutoCompartment ac(cx, mScript);
    JS::RootedScript jsscript(cx, mScript);

    mXDRData.construct<JS::TranscodeBuffer>();

    JS::TranscodeResult code = JS::EncodeScript(cx, Buffer(), jsscript);
    if (code == JS::TranscodeResult_Ok) {
        mXDRRange.emplace(Buffer().begin(), Buffer().length());
        mSize = Range().length();
        return true;
    }
    mXDRData.destroy();
    JS_ClearPendingException(cx);
    return false;
}

JSScript*
ScriptPreloader::CachedScript::GetJSScript(JSContext* cx)
{
    MOZ_ASSERT(mReadyToExecute);
    if (mScript) {
        return mScript;
    }

    // If we have no script at this point, the script was too small to decode
    // off-thread, or it was needed before the off-thread compilation was
    // finished, and is small enough to decode on the main thread rather than
    // wait for the off-thread decoding to finish. In either case, we decode
    // it synchronously the first time it's needed.
    MOZ_ASSERT(HasRange());

    auto start = TimeStamp::Now();
    LOG(Info, "Decoding script %s on main thread...\n", mURL.get());

    JS::RootedScript script(cx);
    if (JS::DecodeScript(cx, Range(), &script)) {
        mScript = script;

        if (mCache.mSaveComplete) {
            FreeData();
        }
    }

    LOG(Debug, "Finished decoding in %fms", (TimeStamp::Now() - start).ToMilliseconds());

    return mScript;
}

NS_IMPL_ISUPPORTS(ScriptPreloader, nsIObserver, nsIRunnable, nsIMemoryReporter)

#undef LOG

} // namespace mozilla