/****************************************************************************
**
** Copyright (C) 2016 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the plugins of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 3 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL3 included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 3 requirements
** will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 2.0 or (at your option) the GNU General
** Public license version 3 or any later version approved by the KDE Free
** Qt Foundation. The licenses are as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
** included in the packaging of this file. Please review the following
** information to ensure the GNU General Public License requirements will
** be met: https://www.gnu.org/licenses/gpl-2.0.html and
** https://www.gnu.org/licenses/gpl-3.0.html.
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include "qxcbconnection.h"
#include "qxcbkeyboard.h"
#include "qxcbscreen.h"
#include "qxcbwindow.h"
#include "qtouchdevice.h"
#include "QtCore/qmetaobject.h"
#include <qpa/qwindowsysteminterface_p.h>
#include <QDebug>
#include <cmath>

#include <X11/extensions/XInput2.h>
#include <X11/extensions/XI2proto.h>

struct XInput2TouchDeviceData {
    XIDeviceInfo *xiDeviceInfo = nullptr;
    QTouchDevice *qtTouchDevice = nullptr;
    QHash<int, QWindowSystemInterface::TouchPoint> touchPoints;
    QHash<int, QPointF> pointPressedPosition; // in screen coordinates where each point was pressed

    // Stuff that is relevant only for touchpads
    QPointF firstPressedPosition;        // in screen coordinates where the first point was pressed
    QPointF firstPressedNormalPosition;  // device coordinates (0 to 1, 0 to 1) where the first point was pressed
    QSizeF size;                         // device size in mm
    bool providesTouchOrientation = false;
};

void QXcbConnection::initializeXInput2()
{
    // TODO Qt 6 (or perhaps earlier): remove these redundant env variables
    if (qEnvironmentVariableIsSet("QT_XCB_DEBUG_XINPUT"))
        const_cast<QLoggingCategory&>(lcQpaXInput()).setEnabled(QtDebugMsg, true);
    if (qEnvironmentVariableIsSet("QT_XCB_DEBUG_XINPUT_DEVICES"))
        const_cast<QLoggingCategory&>(lcQpaXInputDevices()).setEnabled(QtDebugMsg, true);
    Display *xDisplay = static_cast<Display *>(m_xlib_display);
    if (XQueryExtension(xDisplay, "XInputExtension", &m_xiOpCode, &m_xiEventBase, &m_xiErrorBase)) {
        int xiMajor = 2;
        // try 2.2 first, needed for TouchBegin/Update/End
        if (XIQueryVersion(xDisplay, &xiMajor, &m_xi2Minor) == BadRequest) {
            m_xi2Minor = 1; // for smooth scrolling 2.1 is enough
            if (XIQueryVersion(xDisplay, &xiMajor, &m_xi2Minor) == BadRequest) {
                m_xi2Minor = 0; // for tablet support 2.0 is enough
                m_xi2Enabled = XIQueryVersion(xDisplay, &xiMajor, &m_xi2Minor) != BadRequest;
            } else
                m_xi2Enabled = true;
        } else
            m_xi2Enabled = true;
        if (m_xi2Enabled) {
#ifdef XCB_USE_XINPUT22
            qCDebug(lcQpaXInputDevices, "XInput version %d.%d is available and Qt supports 2.2 or greater", xiMajor, m_xi2Minor);
            m_startSystemResizeInfo.window = XCB_NONE;
#else
            qCDebug(lcQpaXInputDevices, "XInput version %d.%d is available and Qt supports 2.0", xiMajor, m_xi2Minor);
#endif
            xi2SelectStateEvents();
        }

        xi2SetupDevices();
    }
}

void QXcbConnection::xi2SelectStateEvents()
{
    // These state events do not depend on a specific X window, but are global
    // for the X client's (application's) state.
    unsigned int bitMask = 0;
    unsigned char *xiBitMask = reinterpret_cast<unsigned char *>(&bitMask);
    XIEventMask xiEventMask;
    bitMask = XI_HierarchyChangedMask;
    bitMask |= XI_DeviceChangedMask;
    xiEventMask.deviceid = XIAllDevices;
    xiEventMask.mask_len = sizeof(bitMask);
    xiEventMask.mask = xiBitMask;
    Display *dpy = static_cast<Display *>(m_xlib_display);
    XISelectEvents(dpy, DefaultRootWindow(dpy), &xiEventMask, 1);
}

void QXcbConnection::xi2SetupDevices()
{
#if QT_CONFIG(tabletevent)
    m_tabletData.clear();
#endif
    m_scrollingDevices.clear();

    if (!m_xi2Enabled)
        return;

    Display *xDisplay = static_cast<Display *>(m_xlib_display);
    int deviceCount = 0;
    XIDeviceInfo *devices = XIQueryDevice(xDisplay, XIAllDevices, &deviceCount);
    for (int i = 0; i < deviceCount; ++i) {
        // Only non-master pointing devices are relevant here.
        if (devices[i].use != XISlavePointer)
            continue;
        qCDebug(lcQpaXInputDevices) << "input device " << devices[i].name << "ID" << devices[i].deviceid;
#if QT_CONFIG(tabletevent)
        TabletData tabletData;
#endif
        ScrollingDevice scrollingDevice;
        for (int c = 0; c < devices[i].num_classes; ++c) {
            switch (devices[i].classes[c]->type) {
            case XIValuatorClass: {
                XIValuatorClassInfo *vci = reinterpret_cast<XIValuatorClassInfo *>(devices[i].classes[c]);
                const int valuatorAtom = qatom(vci->label);
                qCDebug(lcQpaXInputDevices) << "   has valuator" << atomName(vci->label) << "recognized?" << (valuatorAtom < QXcbAtom::NAtoms);
#if QT_CONFIG(tabletevent)
                if (valuatorAtom < QXcbAtom::NAtoms) {
                    TabletData::ValuatorClassInfo info;
                    info.minVal = vci->min;
                    info.maxVal = vci->max;
                    info.number = vci->number;
                    tabletData.valuatorInfo[valuatorAtom] = info;
                }
#endif // QT_CONFIG(tabletevent)
                if (valuatorAtom == QXcbAtom::RelHorizScroll || valuatorAtom == QXcbAtom::RelHorizWheel)
                    scrollingDevice.lastScrollPosition.setX(vci->value);
                else if (valuatorAtom == QXcbAtom::RelVertScroll || valuatorAtom == QXcbAtom::RelVertWheel)
                    scrollingDevice.lastScrollPosition.setY(vci->value);
                break;
            }
#ifdef XCB_USE_XINPUT21
            case XIScrollClass: {
                XIScrollClassInfo *sci = reinterpret_cast<XIScrollClassInfo *>(devices[i].classes[c]);
                if (sci->scroll_type == XIScrollTypeVertical) {
                    scrollingDevice.orientations |= Qt::Vertical;
                    scrollingDevice.verticalIndex = sci->number;
                    scrollingDevice.verticalIncrement = sci->increment;
                }
                else if (sci->scroll_type == XIScrollTypeHorizontal) {
                    scrollingDevice.orientations |= Qt::Horizontal;
                    scrollingDevice.horizontalIndex = sci->number;
                    scrollingDevice.horizontalIncrement = sci->increment;
                }
                break;
            }
            case XIButtonClass: {
                XIButtonClassInfo *bci = reinterpret_cast<XIButtonClassInfo *>(devices[i].classes[c]);
                if (bci->num_buttons >= 5) {
                    Atom label4 = bci->labels[3];
                    Atom label5 = bci->labels[4];
                    // Some drivers have no labels on the wheel buttons, some have no label on just one and some have no label on
                    // button 4 and the wrong one on button 5. So we just check that they are not labelled with unrelated buttons.
                    if ((!label4 || qatom(label4) == QXcbAtom::ButtonWheelUp || qatom(label4) == QXcbAtom::ButtonWheelDown) &&
                        (!label5 || qatom(label5) == QXcbAtom::ButtonWheelUp || qatom(label5) == QXcbAtom::ButtonWheelDown))
                        scrollingDevice.legacyOrientations |= Qt::Vertical;
                }
                if (bci->num_buttons >= 7) {
                    Atom label6 = bci->labels[5];
                    Atom label7 = bci->labels[6];
                    if ((!label6 || qatom(label6) == QXcbAtom::ButtonHorizWheelLeft) && (!label7 || qatom(label7) == QXcbAtom::ButtonHorizWheelRight))
                        scrollingDevice.legacyOrientations |= Qt::Horizontal;
                }
                qCDebug(lcQpaXInputDevices, "   has %d buttons", bci->num_buttons);
                break;
            }
#endif
            case XIKeyClass:
                qCDebug(lcQpaXInputDevices) << "   it's a keyboard";
                break;
#ifdef XCB_USE_XINPUT22
            case XITouchClass:
                // will be handled in deviceForId()
                break;
#endif
            default:
                qCDebug(lcQpaXInputDevices) << "   has class" << devices[i].classes[c]->type;
                break;
            }
        }
        bool isTablet = false;
#if QT_CONFIG(tabletevent)
        // If we have found the valuators which we expect a tablet to have, it might be a tablet.
        if (tabletData.valuatorInfo.contains(QXcbAtom::AbsX) &&
                tabletData.valuatorInfo.contains(QXcbAtom::AbsY) &&
                tabletData.valuatorInfo.contains(QXcbAtom::AbsPressure))
            isTablet = true;

        // But we need to be careful not to take the touch and tablet-button devices as tablets.
        QByteArray name = QByteArray(devices[i].name).toLower();
        QString dbgType = QLatin1String("UNKNOWN");
        if (name.contains("eraser")) {
            isTablet = true;
            tabletData.pointerType = QTabletEvent::Eraser;
            dbgType = QLatin1String("eraser");
        } else if (name.contains("cursor") && !(name.contains("cursor controls") && name.contains("trackball"))) {
            isTablet = true;
            tabletData.pointerType = QTabletEvent::Cursor;
            dbgType = QLatin1String("cursor");
        } else if (name.contains("wacom") && name.contains("finger touch")) {
            isTablet = false;
        } else if ((name.contains("pen") || name.contains("stylus")) && isTablet) {
            tabletData.pointerType = QTabletEvent::Pen;
            dbgType = QLatin1String("pen");
        } else if (name.contains("wacom") && isTablet && !name.contains("touch")) {
            // combined device (evdev) rather than separate pen/eraser (wacom driver)
            tabletData.pointerType = QTabletEvent::Pen;
            dbgType = QLatin1String("pen");
        } else if (name.contains("aiptek") /* && device == QXcbAtom::KEYBOARD */) {
            // some "Genius" tablets
            isTablet = true;
            tabletData.pointerType = QTabletEvent::Pen;
            dbgType = QLatin1String("pen");
        } else if (name.contains("waltop") && name.contains("tablet")) {
            // other "Genius" tablets
            // WALTOP International Corp. Slim Tablet
            isTablet = true;
            tabletData.pointerType = QTabletEvent::Pen;
            dbgType = QLatin1String("pen");
        } else if (name.contains("uc-logic") && isTablet) {
            tabletData.pointerType = QTabletEvent::Pen;
            dbgType = QLatin1String("pen");
        } else {
            isTablet = false;
        }

        if (isTablet) {
            tabletData.deviceId = devices[i].deviceid;
            m_tabletData.append(tabletData);
            qCDebug(lcQpaXInputDevices) << "   it's a tablet with pointer type" << dbgType;
        }
#endif // QT_CONFIG(tabletevent)

#ifdef XCB_USE_XINPUT21
        if (scrollingDevice.orientations || scrollingDevice.legacyOrientations) {
            scrollingDevice.deviceId = devices[i].deviceid;
            // Only use legacy wheel button events when we don't have real scroll valuators.
            scrollingDevice.legacyOrientations &= ~scrollingDevice.orientations;
            m_scrollingDevices.insert(scrollingDevice.deviceId, scrollingDevice);
            qCDebug(lcQpaXInputDevices) << "   it's a scrolling device";
        }
#endif

        if (!isTablet) {
            // touchDeviceForId populates XInput2DeviceData the first time it is called
            // with a new deviceId. On subsequent calls it will return the cached object.
            XInput2TouchDeviceData *dev = touchDeviceForId(devices[i].deviceid);
            if (dev && lcQpaXInputDevices().isDebugEnabled()) {
                if (dev->qtTouchDevice->type() == QTouchDevice::TouchScreen)
                    qCDebug(lcQpaXInputDevices, "   it's a touchscreen with type %d capabilities 0x%X max touch points %d",
                            dev->qtTouchDevice->type(), (unsigned int)dev->qtTouchDevice->capabilities(),
                            dev->qtTouchDevice->maximumTouchPoints());
                else if (dev->qtTouchDevice->type() == QTouchDevice::TouchPad)
                    qCDebug(lcQpaXInputDevices, "   it's a touchpad with type %d capabilities 0x%X max touch points %d size %f x %f",
                            dev->qtTouchDevice->type(), (unsigned int)dev->qtTouchDevice->capabilities(),
                            dev->qtTouchDevice->maximumTouchPoints(),
                            dev->size.width(), dev->size.height());
            }
        }
    }
    XIFreeDeviceInfo(devices);
}

void QXcbConnection::finalizeXInput2()
{
    for (XInput2TouchDeviceData *dev : qAsConst(m_touchDevices)) {
        if (dev->xiDeviceInfo)
            XIFreeDeviceInfo(dev->xiDeviceInfo);
        delete dev;
    }
}

void QXcbConnection::xi2Select(xcb_window_t window)
{
    if (!m_xi2Enabled || window == rootWindow())
        return;

    Display *xDisplay = static_cast<Display *>(m_xlib_display);
    unsigned int bitMask = 0;
    unsigned char *xiBitMask = reinterpret_cast<unsigned char *>(&bitMask);

#ifdef XCB_USE_XINPUT22
    if (isAtLeastXI22()) {
        bitMask |= XI_TouchBeginMask;
        bitMask |= XI_TouchUpdateMask;
        bitMask |= XI_TouchEndMask;
        bitMask |= XI_PropertyEventMask; // for tablets
        if (xi2MouseEvents()) {
            // We want both mouse and touch through XI2 if touch is supported (>= 2.2).
            // The plain xcb press and motion events will not be delivered after this.
            bitMask |= XI_ButtonPressMask;
            bitMask |= XI_ButtonReleaseMask;
            bitMask |= XI_MotionMask;

            // There is a check for enter/leave events in plain xcb enter/leave event handler
            bitMask |= XI_EnterMask;
            bitMask |= XI_LeaveMask;

            qCDebug(lcQpaXInput, "XInput 2.2: Selecting press/release/motion events in addition to touch");
        }
        XIEventMask mask;
        mask.mask_len = sizeof(bitMask);
        mask.mask = xiBitMask;
        // When xi2MouseEvents() is true (the default), pointer emulation for touch and tablet
        // events will get disabled. This is preferable, as Qt Quick handles touch events
        // directly, while for other applications QtGui synthesizes mouse events.
        mask.deviceid = XIAllMasterDevices;
        Status result = XISelectEvents(xDisplay, window, &mask, 1);
        if (result == Success)
            QWindowSystemInterfacePrivate::TabletEvent::setPlatformSynthesizesMouse(false);
        else
            qCDebug(lcQpaXInput, "XInput 2.2: failed to select pointer/touch events, window %x, result %d", window, result);
    }

    const bool pointerSelected = isAtLeastXI22() && xi2MouseEvents();
#else
    const bool pointerSelected = false;
#endif // XCB_USE_XINPUT22

    QSet<int> tabletDevices;
#if QT_CONFIG(tabletevent)
    if (!m_tabletData.isEmpty()) {
        unsigned int tabletBitMask;
        unsigned char *xiTabletBitMask = reinterpret_cast<unsigned char *>(&tabletBitMask);
        QVector<XIEventMask> xiEventMask(m_tabletData.count());
        tabletBitMask = XI_PropertyEventMask;
        if (!pointerSelected)
            tabletBitMask |= XI_ButtonPressMask | XI_ButtonReleaseMask | XI_MotionMask;
        for (int i = 0; i < m_tabletData.count(); ++i) {
            int deviceId = m_tabletData.at(i).deviceId;
            tabletDevices.insert(deviceId);
            xiEventMask[i].deviceid = deviceId;
            xiEventMask[i].mask_len = sizeof(tabletBitMask);
            xiEventMask[i].mask = xiTabletBitMask;
        }
        XISelectEvents(xDisplay, window, xiEventMask.data(), m_tabletData.count());
    }
#endif // QT_CONFIG(tabletevent)

#ifdef XCB_USE_XINPUT21
    // Enable each scroll device
    if (!m_scrollingDevices.isEmpty() && !pointerSelected) {
        // Only when XI2 mouse events are not enabled, otherwise motion and release are selected already.
        QVector<XIEventMask> xiEventMask(m_scrollingDevices.size());
        unsigned int scrollBitMask;
        unsigned char *xiScrollBitMask = reinterpret_cast<unsigned char *>(&scrollBitMask);

        scrollBitMask = XI_MotionMask;
        scrollBitMask |= XI_ButtonReleaseMask;
        int i=0;
        for (const ScrollingDevice& scrollingDevice : qAsConst(m_scrollingDevices)) {
            if (tabletDevices.contains(scrollingDevice.deviceId))
                continue; // All necessary events are already captured.
            xiEventMask[i].deviceid = scrollingDevice.deviceId;
            xiEventMask[i].mask_len = sizeof(scrollBitMask);
            xiEventMask[i].mask = xiScrollBitMask;
            i++;
        }
        XISelectEvents(xDisplay, window, xiEventMask.data(), i);
    }
#else
    Q_UNUSED(xiBitMask);
#endif
}

XInput2TouchDeviceData *QXcbConnection::touchDeviceForId(int id)
{
    XInput2TouchDeviceData *dev = Q_NULLPTR;
    QHash<int, XInput2TouchDeviceData*>::const_iterator devIt = m_touchDevices.constFind(id);
    if (devIt != m_touchDevices.cend()) {
        dev = devIt.value();
    } else {
        int nrDevices = 0;
        QTouchDevice::Capabilities caps = 0;
        dev = new XInput2TouchDeviceData;
        dev->xiDeviceInfo = XIQueryDevice(static_cast<Display *>(m_xlib_display), id, &nrDevices);
        if (nrDevices <= 0) {
            delete dev;
            return 0;
        }
        int type = -1;
        int maxTouchPoints = 1;
        bool hasRelativeCoords = false;
        for (int i = 0; i < dev->xiDeviceInfo->num_classes; ++i) {
            XIAnyClassInfo *classinfo = dev->xiDeviceInfo->classes[i];
            switch (classinfo->type) {
#ifdef XCB_USE_XINPUT22
            case XITouchClass: {
                XITouchClassInfo *tci = reinterpret_cast<XITouchClassInfo *>(classinfo);
                maxTouchPoints = tci->num_touches;
                qCDebug(lcQpaXInputDevices, "   has touch class with mode %d", tci->mode);
                switch (tci->mode) {
                case XIDependentTouch:
                    type = QTouchDevice::TouchPad;
                    break;
                case XIDirectTouch:
                    type = QTouchDevice::TouchScreen;
                    break;
                }
                break;
            }
#endif // XCB_USE_XINPUT22
            case XIValuatorClass: {
                XIValuatorClassInfo *vci = reinterpret_cast<XIValuatorClassInfo *>(classinfo);
                // Some devices (mice) report a resolution of 0; they will be excluded later,
                // for now just prevent a division by zero
                const int vciResolution = vci->resolution ? vci->resolution : 1;
                if (vci->label == atom(QXcbAtom::AbsMTPositionX))
                    caps |= QTouchDevice::Position | QTouchDevice::NormalizedPosition;
                else if (vci->label == atom(QXcbAtom::AbsMTTouchMajor))
                    caps |= QTouchDevice::Area;
                else if (vci->label == atom(QXcbAtom::AbsMTOrientation))
                    dev->providesTouchOrientation = true;
                else if (vci->label == atom(QXcbAtom::AbsMTPressure) || vci->label == atom(QXcbAtom::AbsPressure))
                    caps |= QTouchDevice::Pressure;
                else if (vci->label == atom(QXcbAtom::RelX)) {
                    hasRelativeCoords = true;
                    dev->size.setWidth((vci->max - vci->min) * 1000.0 / vciResolution);
                } else if (vci->label == atom(QXcbAtom::RelY)) {
                    hasRelativeCoords = true;
                    dev->size.setHeight((vci->max - vci->min) * 1000.0 / vciResolution);
                } else if (vci->label == atom(QXcbAtom::AbsX)) {
                    caps |= QTouchDevice::Position;
                    dev->size.setWidth((vci->max - vci->min) * 1000.0 / vciResolution);
                } else if (vci->label == atom(QXcbAtom::AbsY)) {
                    caps |= QTouchDevice::Position;
                    dev->size.setHeight((vci->max - vci->min) * 1000.0 / vciResolution);
                }
                break;
            }
            default:
                break;
            }
        }
        if (type < 0 && caps && hasRelativeCoords) {
            type = QTouchDevice::TouchPad;
            if (dev->size.width() < 10 || dev->size.height() < 10 ||
                    dev->size.width() > 10000 || dev->size.height() > 10000)
                dev->size = QSizeF(130, 110);
        }
        if (!isAtLeastXI22() || type == QTouchDevice::TouchPad)
            caps |= QTouchDevice::MouseEmulation;

        if (type >= QTouchDevice::TouchScreen && type <= QTouchDevice::TouchPad) {
            dev->qtTouchDevice = new QTouchDevice;
            dev->qtTouchDevice->setName(QString::fromUtf8(dev->xiDeviceInfo->name));
            dev->qtTouchDevice->setType((QTouchDevice::DeviceType)type);
            dev->qtTouchDevice->setCapabilities(caps);
            dev->qtTouchDevice->setMaximumTouchPoints(maxTouchPoints);
            if (caps != 0)
                QWindowSystemInterface::registerTouchDevice(dev->qtTouchDevice);
            m_touchDevices[id] = dev;
        } else {
            XIFreeDeviceInfo(dev->xiDeviceInfo);
            delete dev;
            dev = 0;
        }
    }
    return dev;
}

#if defined(XCB_USE_XINPUT21) || QT_CONFIG(tabletevent)
static inline qreal fixed1616ToReal(FP1616 val)
{
    return qreal(val) / 0x10000;
}
#endif // defined(XCB_USE_XINPUT21) || QT_CONFIG(tabletevent)

void QXcbConnection::xi2HandleEvent(xcb_ge_event_t *event)
{
    xi2PrepareXIGenericDeviceEvent(event);
    xXIGenericDeviceEvent *xiEvent = reinterpret_cast<xXIGenericDeviceEvent *>(event);
    int sourceDeviceId = xiEvent->deviceid; // may be the master id
    xXIDeviceEvent *xiDeviceEvent = 0;
    xXIEnterEvent *xiEnterEvent = 0;
    QXcbWindowEventListener *eventListener = 0;

    switch (xiEvent->evtype) {
    case XI_ButtonPress:
    case XI_ButtonRelease:
    case XI_Motion:
#ifdef XCB_USE_XINPUT22
    case XI_TouchBegin:
    case XI_TouchUpdate:
    case XI_TouchEnd:
#endif
    {
        xiDeviceEvent = reinterpret_cast<xXIDeviceEvent *>(event);
        eventListener = windowEventListenerFromId(xiDeviceEvent->event);
        sourceDeviceId = xiDeviceEvent->sourceid; // use the actual device id instead of the master
        break;
    }
    case XI_Enter:
    case XI_Leave: {
        xiEnterEvent = reinterpret_cast<xXIEnterEvent *>(event);
        eventListener = windowEventListenerFromId(xiEnterEvent->event);
        sourceDeviceId = xiEnterEvent->sourceid; // use the actual device id instead of the master
        break;
    }
    case XI_HierarchyChanged:
        xi2HandleHierachyEvent(xiEvent);
        return;
    case XI_DeviceChanged:
        xi2HandleDeviceChangedEvent(xiEvent);
        return;
    default:
        break;
    }

    if (eventListener) {
        long result = 0;
        if (eventListener->handleGenericEvent(reinterpret_cast<xcb_generic_event_t *>(event), &result))
            return;
    }

#if QT_CONFIG(tabletevent)
    if (!xiEnterEvent) {
        QXcbConnection::TabletData *tablet = tabletDataForDevice(sourceDeviceId);
        if (tablet && xi2HandleTabletEvent(xiEvent, tablet))
            return;
    }
#endif // QT_CONFIG(tabletevent)

#ifdef XCB_USE_XINPUT21
    QHash<int, ScrollingDevice>::iterator device = m_scrollingDevices.find(sourceDeviceId);
    if (device != m_scrollingDevices.end())
        xi2HandleScrollEvent(xiEvent, device.value());
#endif // XCB_USE_XINPUT21

#ifdef XCB_USE_XINPUT22
    if (xiDeviceEvent) {
        switch (xiDeviceEvent->evtype) {
        case XI_ButtonPress:
        case XI_ButtonRelease:
        case XI_Motion:
            if (xi2MouseEvents() && eventListener && !(xiDeviceEvent->flags & XIPointerEmulated))
                eventListener->handleXIMouseEvent(event);
            break;

        case XI_TouchBegin:
        case XI_TouchUpdate:
        case XI_TouchEnd:
            if (Q_UNLIKELY(lcQpaXInputEvents().isDebugEnabled()))
                qCDebug(lcQpaXInputEvents, "XI2 touch event type %d seq %d detail %d pos %6.1f, %6.1f root pos %6.1f, %6.1f on window %x",
                        event->event_type, xiDeviceEvent->sequenceNumber, xiDeviceEvent->detail,
                        fixed1616ToReal(xiDeviceEvent->event_x), fixed1616ToReal(xiDeviceEvent->event_y),
                        fixed1616ToReal(xiDeviceEvent->root_x), fixed1616ToReal(xiDeviceEvent->root_y),xiDeviceEvent->event);
            if (QXcbWindow *platformWindow = platformWindowFromId(xiDeviceEvent->event))
                xi2ProcessTouch(xiDeviceEvent, platformWindow);
            break;
        }
    } else if (xiEnterEvent && xi2MouseEvents() && eventListener) {
        switch (xiEnterEvent->evtype) {
        case XI_Enter:
        case XI_Leave:
            eventListener->handleXIEnterLeave(event);
            break;
        }
    }
#endif // XCB_USE_XINPUT22
}

#ifdef XCB_USE_XINPUT22
static qreal valuatorNormalized(double value, XIValuatorClassInfo *vci)
{
    if (value > vci->max)
        value = vci->max;
    if (value < vci->min)
        value = vci->min;
    return (value - vci->min) / (vci->max - vci->min);
}

void QXcbConnection::xi2ProcessTouch(void *xiDevEvent, QXcbWindow *platformWindow)
{
    xXIDeviceEvent *xiDeviceEvent = static_cast<xXIDeviceEvent *>(xiDevEvent);
    XInput2TouchDeviceData *dev = touchDeviceForId(xiDeviceEvent->sourceid);
    Q_ASSERT(dev);
    const bool firstTouch = dev->touchPoints.isEmpty();
    if (xiDeviceEvent->evtype == XI_TouchBegin) {
        QWindowSystemInterface::TouchPoint tp;
        tp.id = xiDeviceEvent->detail % INT_MAX;
        tp.state = Qt::TouchPointPressed;
        tp.pressure = -1.0;
        dev->touchPoints[tp.id] = tp;
    }
    QWindowSystemInterface::TouchPoint &touchPoint = dev->touchPoints[xiDeviceEvent->detail];
    QXcbScreen* screen = platformWindow->xcbScreen();
    qreal x = fixed1616ToReal(xiDeviceEvent->root_x);
    qreal y = fixed1616ToReal(xiDeviceEvent->root_y);
    qreal nx = -1.0, ny = -1.0;
    qreal w = 0.0, h = 0.0;
    bool majorAxisIsY = touchPoint.area.height() > touchPoint.area.width();
    for (int i = 0; i < dev->xiDeviceInfo->num_classes; ++i) {
        XIAnyClassInfo *classinfo = dev->xiDeviceInfo->classes[i];
        if (classinfo->type == XIValuatorClass) {
            XIValuatorClassInfo *vci = reinterpret_cast<XIValuatorClassInfo *>(classinfo);
            int n = vci->number;
            double value;
            if (!xi2GetValuatorValueIfSet(xiDeviceEvent, n, &value))
                continue;
            if (Q_UNLIKELY(lcQpaXInputEvents().isDebugEnabled()))
                qCDebug(lcQpaXInputEvents, "   valuator %20s value %lf from range %lf -> %lf",
                        atomName(vci->label).constData(), value, vci->min, vci->max );
            if (vci->label == atom(QXcbAtom::RelX)) {
                nx = valuatorNormalized(value, vci);
            } else if (vci->label == atom(QXcbAtom::RelY)) {
                ny = valuatorNormalized(value, vci);
            } else if (vci->label == atom(QXcbAtom::AbsX)) {
                nx = valuatorNormalized(value, vci);
            } else if (vci->label == atom(QXcbAtom::AbsY)) {
                ny = valuatorNormalized(value, vci);
            } else if (vci->label == atom(QXcbAtom::AbsMTPositionX)) {
                nx = valuatorNormalized(value, vci);
            } else if (vci->label == atom(QXcbAtom::AbsMTPositionY)) {
                ny = valuatorNormalized(value, vci);
            } else if (vci->label == atom(QXcbAtom::AbsMTTouchMajor)) {
                const qreal sw = screen->geometry().width();
                const qreal sh = screen->geometry().height();
                w = valuatorNormalized(value, vci) * std::sqrt(sw * sw + sh * sh);
            } else if (vci->label == atom(QXcbAtom::AbsMTTouchMinor)) {
                const qreal sw = screen->geometry().width();
                const qreal sh = screen->geometry().height();
                h = valuatorNormalized(value, vci) * std::sqrt(sw * sw + sh * sh);
            } else if (vci->label == atom(QXcbAtom::AbsMTOrientation)) {
                // Find the closest axis.
                // 0 corresponds to the Y axis, vci->max to the X axis.
                // Flipping over the Y axis and rotating by 180 degrees
                // don't change the result, so normalize value to range
                // [0, vci->max] first.
                value = qAbs(value);
                while (value > vci->max)
                    value -= 2 * vci->max;
                value = qAbs(value);
                majorAxisIsY = value < vci->max - value;
            } else if (vci->label == atom(QXcbAtom::AbsMTPressure) ||
                       vci->label == atom(QXcbAtom::AbsPressure)) {
                touchPoint.pressure = valuatorNormalized(value, vci);
            }
        }
    }
    // If any value was not updated, use the last-known value.
    if (nx == -1.0) {
        x = touchPoint.area.center().x();
        nx = x / screen->geometry().width();
    }
    if (ny == -1.0) {
        y = touchPoint.area.center().y();
        ny = y / screen->geometry().height();
    }
    if (xiDeviceEvent->evtype != XI_TouchEnd) {
        if (!dev->providesTouchOrientation) {
            if (w == 0.0)
                w = touchPoint.area.width();
            h = w;
        } else {
            if (w == 0.0)
                w = qMax(touchPoint.area.width(), touchPoint.area.height());
            if (h == 0.0)
                h = qMin(touchPoint.area.width(), touchPoint.area.height());
            if (majorAxisIsY)
                qSwap(w, h);
        }
    }

    switch (xiDeviceEvent->evtype) {
    case XI_TouchBegin:
        if (firstTouch) {
            dev->firstPressedPosition = QPointF(x, y);
            dev->firstPressedNormalPosition = QPointF(nx, ny);
        }
        dev->pointPressedPosition.insert(touchPoint.id, QPointF(x, y));

        // Touches must be accepted when we are grabbing touch events. Otherwise the entire sequence
        // will get replayed when the grab ends.
        if (m_xiGrab) {
            // Note that XIAllowTouchEvents is known to deadlock with older libXi versions,
            // for details see qtbase/src/plugins/platforms/xcb/README. This has nothing to
            // do with the XInput protocol version, but is a bug in libXi implementation instead.
            XIAllowTouchEvents(static_cast<Display *>(m_xlib_display), xiDeviceEvent->deviceid,
                               xiDeviceEvent->detail, xiDeviceEvent->event, XIAcceptTouch);
        }
        break;
    case XI_TouchUpdate:
        if (dev->qtTouchDevice->type() == QTouchDevice::TouchPad && dev->pointPressedPosition.value(touchPoint.id) == QPointF(x, y)) {
            qreal dx = (nx - dev->firstPressedNormalPosition.x()) *
                dev->size.width() * screen->geometry().width() / screen->physicalSize().width();
            qreal dy = (ny - dev->firstPressedNormalPosition.y()) *
                dev->size.height() * screen->geometry().height() / screen->physicalSize().height();
            x = dev->firstPressedPosition.x() + dx;
            y = dev->firstPressedPosition.y() + dy;
            touchPoint.state = Qt::TouchPointMoved;
        } else if (touchPoint.area.center() != QPoint(x, y)) {
            touchPoint.state = Qt::TouchPointMoved;
            if (dev->qtTouchDevice->type() == QTouchDevice::TouchPad)
                dev->pointPressedPosition[touchPoint.id] = QPointF(x, y);
        }

        if (dev->qtTouchDevice->type() == QTouchDevice::TouchScreen &&
            xiDeviceEvent->event == m_startSystemResizeInfo.window &&
            xiDeviceEvent->sourceid == m_startSystemResizeInfo.deviceid &&
            xiDeviceEvent->detail == m_startSystemResizeInfo.pointid) {
            QXcbWindow *window = platformWindowFromId(m_startSystemResizeInfo.window);
            if (window) {
                XIAllowTouchEvents(static_cast<Display *>(m_xlib_display), xiDeviceEvent->deviceid,
                                   xiDeviceEvent->detail, xiDeviceEvent->event, XIRejectTouch);
                window->doStartSystemResize(QPoint(x, y), m_startSystemResizeInfo.corner);
                m_startSystemResizeInfo.window = XCB_NONE;
            }
        }
        break;
    case XI_TouchEnd:
        touchPoint.state = Qt::TouchPointReleased;
        if (dev->qtTouchDevice->type() == QTouchDevice::TouchPad && dev->pointPressedPosition.value(touchPoint.id) == QPointF(x, y)) {
            qreal dx = (nx - dev->firstPressedNormalPosition.x()) *
                dev->size.width() * screen->geometry().width() / screen->physicalSize().width();
            qreal dy = (ny - dev->firstPressedNormalPosition.y()) *
                dev->size.width() * screen->geometry().width() / screen->physicalSize().width();
            x = dev->firstPressedPosition.x() + dx;
            y = dev->firstPressedPosition.y() + dy;
        }
        dev->pointPressedPosition.remove(touchPoint.id);
    }
    touchPoint.area = QRectF(x - w/2, y - h/2, w, h);
    touchPoint.normalPosition = QPointF(nx, ny);

    if (Q_UNLIKELY(lcQpaXInputEvents().isDebugEnabled()))
        qCDebug(lcQpaXInputEvents) << "   touchpoint "  << touchPoint.id << " state " << touchPoint.state << " pos norm " << touchPoint.normalPosition <<
            " area " << touchPoint.area << " pressure " << touchPoint.pressure;
    Qt::KeyboardModifiers modifiers = keyboard()->translateModifiers(xiDeviceEvent->mods.effective_mods);
    QWindowSystemInterface::handleTouchEvent(platformWindow->window(), xiDeviceEvent->time, dev->qtTouchDevice, dev->touchPoints.values(), modifiers);
    if (touchPoint.state == Qt::TouchPointReleased)
        // If a touchpoint was released, we can forget it, because the ID won't be reused.
        dev->touchPoints.remove(touchPoint.id);
    else
        // Make sure that we don't send TouchPointPressed/Moved in more than one QTouchEvent
        // with this touch point if the next XI2 event is about a different touch point.
        touchPoint.state = Qt::TouchPointStationary;
}

bool QXcbConnection::startSystemResizeForTouchBegin(xcb_window_t window, const QPoint &point, Qt::Corner corner)
{
    QHash<int, XInput2TouchDeviceData*>::const_iterator devIt = m_touchDevices.constBegin();
    for (; devIt != m_touchDevices.constEnd(); ++devIt) {
        XInput2TouchDeviceData *deviceData = devIt.value();
        if (deviceData->qtTouchDevice->type() == QTouchDevice::TouchScreen) {
            QHash<int, QPointF>::const_iterator pointIt = deviceData->pointPressedPosition.constBegin();
            for (; pointIt != deviceData->pointPressedPosition.constEnd(); ++pointIt) {
                if (pointIt.value().toPoint() == point) {
                    m_startSystemResizeInfo.window = window;
                    m_startSystemResizeInfo.deviceid = devIt.key();
                    m_startSystemResizeInfo.pointid = pointIt.key();
                    m_startSystemResizeInfo.corner = corner;
                    return true;
                }
            }
        }
    }
    return false;
}

bool QXcbConnection::xi2SetMouseGrabEnabled(xcb_window_t w, bool grab)
{
    if (grab && !canGrab())
        return false;

    int num_devices = 0;
    Display *xDisplay = static_cast<Display *>(xlib_display());
    XIDeviceInfo *info = XIQueryDevice(xDisplay, XIAllMasterDevices, &num_devices);
    if (!info)
        return false;

    XIEventMask evmask;
    unsigned char mask[XIMaskLen(XI_LASTEVENT)];
    evmask.mask = mask;
    evmask.mask_len = sizeof(mask);
    memset(mask, 0, sizeof(mask));
    evmask.deviceid = XIAllMasterDevices;

    XISetMask(mask, XI_ButtonPress);
    XISetMask(mask, XI_ButtonRelease);
    XISetMask(mask, XI_Motion);
    XISetMask(mask, XI_Enter);
    XISetMask(mask, XI_Leave);
    XISetMask(mask, XI_TouchBegin);
    XISetMask(mask, XI_TouchUpdate);
    XISetMask(mask, XI_TouchEnd);

    bool grabbed = true;
    for (int i = 0; i < num_devices; i++) {
        int id = info[i].deviceid, n = 0;
        XIDeviceInfo *deviceInfo = XIQueryDevice(xDisplay, id, &n);
        if (deviceInfo) {
            const bool grabbable = deviceInfo->use != XIMasterKeyboard;
            XIFreeDeviceInfo(deviceInfo);
            if (!grabbable)
                continue;
        }
        if (!grab) {
            Status result = XIUngrabDevice(xDisplay, id, CurrentTime);
            if (result != Success) {
                grabbed = false;
                qCDebug(lcQpaXInput, "XInput 2.2: failed to ungrab events for device %d (result %d)", id, result);
            }
        } else {
            Status result = XIGrabDevice(xDisplay, id, w, CurrentTime, None, XIGrabModeAsync,
                                         XIGrabModeAsync, False, &evmask);
            if (result != Success) {
                grabbed = false;
                qCDebug(lcQpaXInput, "XInput 2.2: failed to grab events for device %d on window %x (result %d)", id, w, result);
            }
        }
    }

    XIFreeDeviceInfo(info);

    m_xiGrab = grabbed;

    return grabbed;
}
#endif // XCB_USE_XINPUT22

void QXcbConnection::xi2HandleHierachyEvent(void *event)
{
    xXIHierarchyEvent *xiEvent = reinterpret_cast<xXIHierarchyEvent *>(event);
    // We only care about hotplugged devices
    if (!(xiEvent->flags & (XISlaveRemoved | XISlaveAdded)))
        return;
    xi2SetupDevices();
    // Reselect events for all event-listening windows.
    for (auto it = m_mapper.cbegin(), end = m_mapper.cend(); it != end; ++it)
        xi2Select(it.key());
}

void QXcbConnection::xi2HandleDeviceChangedEvent(void *event)
{
    xXIDeviceChangedEvent *xiEvent = reinterpret_cast<xXIDeviceChangedEvent *>(event);

    // ### If a slave device changes (XIDeviceChange), we should probably run setup on it again.
    if (xiEvent->reason != XISlaveSwitch)
        return;

#ifdef XCB_USE_XINPUT21
    // This code handles broken scrolling device drivers that reset absolute positions
    // when they are made active. Whenever a new slave device is made active the
    // primary pointer sends a DeviceChanged event with XISlaveSwitch, and the new
    // active slave in sourceid.

    QHash<int, ScrollingDevice>::iterator device = m_scrollingDevices.find(xiEvent->sourceid);
    if (device == m_scrollingDevices.end())
        return;

    int nrDevices = 0;
    XIDeviceInfo* xiDeviceInfo = XIQueryDevice(static_cast<Display *>(m_xlib_display), xiEvent->sourceid, &nrDevices);
    if (nrDevices <= 0) {
        qCDebug(lcQpaXInputDevices, "scrolling device %d no longer present", xiEvent->sourceid);
        return;
    }
    updateScrollingDevice(*device, xiDeviceInfo->num_classes, xiDeviceInfo->classes);
    XIFreeDeviceInfo(xiDeviceInfo);
#endif
}

void QXcbConnection::updateScrollingDevice(ScrollingDevice &scrollingDevice, int num_classes, void *classInfo)
{
#ifdef XCB_USE_XINPUT21
    XIAnyClassInfo **classes = reinterpret_cast<XIAnyClassInfo**>(classInfo);
    QPointF lastScrollPosition;
    if (lcQpaXInput().isDebugEnabled())
        lastScrollPosition = scrollingDevice.lastScrollPosition;
    for (int c = 0; c < num_classes; ++c) {
        if (classes[c]->type == XIValuatorClass) {
            XIValuatorClassInfo *vci = reinterpret_cast<XIValuatorClassInfo *>(classes[c]);
            const int valuatorAtom = qatom(vci->label);
            if (valuatorAtom == QXcbAtom::RelHorizScroll || valuatorAtom == QXcbAtom::RelHorizWheel)
                scrollingDevice.lastScrollPosition.setX(vci->value);
            else if (valuatorAtom == QXcbAtom::RelVertScroll || valuatorAtom == QXcbAtom::RelVertWheel)
                scrollingDevice.lastScrollPosition.setY(vci->value);
        }
    }
    if (Q_UNLIKELY(lcQpaXInputEvents().isDebugEnabled() && lastScrollPosition != scrollingDevice.lastScrollPosition))
        qCDebug(lcQpaXInputEvents, "scrolling device %d moved from (%f, %f) to (%f, %f)", scrollingDevice.deviceId,
                lastScrollPosition.x(), lastScrollPosition.y(),
                scrollingDevice.lastScrollPosition.x(),
                scrollingDevice.lastScrollPosition.y());
#else
    Q_UNUSED(scrollingDevice);
    Q_UNUSED(num_classes);
    Q_UNUSED(classInfo);
#endif
}

#ifdef XCB_USE_XINPUT21
void QXcbConnection::handleEnterEvent()
{
    QHash<int, ScrollingDevice>::iterator it = m_scrollingDevices.begin();
    const QHash<int, ScrollingDevice>::iterator end = m_scrollingDevices.end();
    while (it != end) {
        ScrollingDevice& scrollingDevice = it.value();
        int nrDevices = 0;
        XIDeviceInfo* xiDeviceInfo = XIQueryDevice(static_cast<Display *>(m_xlib_display), scrollingDevice.deviceId, &nrDevices);
        if (nrDevices <= 0) {
            qCDebug(lcQpaXInputDevices, "scrolling device %d no longer present", scrollingDevice.deviceId);
            it = m_scrollingDevices.erase(it);
            continue;
        }
        updateScrollingDevice(scrollingDevice, xiDeviceInfo->num_classes, xiDeviceInfo->classes);
        XIFreeDeviceInfo(xiDeviceInfo);
        ++it;
    }
}
#endif

void QXcbConnection::xi2HandleScrollEvent(void *event, ScrollingDevice &scrollingDevice)
{
#ifdef XCB_USE_XINPUT21
    xXIGenericDeviceEvent *xiEvent = reinterpret_cast<xXIGenericDeviceEvent *>(event);

    if (xiEvent->evtype == XI_Motion && scrollingDevice.orientations) {
        xXIDeviceEvent* xiDeviceEvent = reinterpret_cast<xXIDeviceEvent *>(event);
        if (QXcbWindow *platformWindow = platformWindowFromId(xiDeviceEvent->event)) {
            QPoint rawDelta;
            QPoint angleDelta;
            double value;
            if (scrollingDevice.orientations & Qt::Vertical) {
                if (xi2GetValuatorValueIfSet(xiDeviceEvent, scrollingDevice.verticalIndex, &value)) {
                    double delta = scrollingDevice.lastScrollPosition.y() - value;
                    scrollingDevice.lastScrollPosition.setY(value);
                    angleDelta.setY((delta / scrollingDevice.verticalIncrement) * 120);
                    // With most drivers the increment is 1 for wheels.
                    // For libinput it is hardcoded to a useless 15.
                    // For a proper touchpad driver it should be in the same order of magnitude as 120
                    if (scrollingDevice.verticalIncrement > 15)
                        rawDelta.setY(delta);
                    else if (scrollingDevice.verticalIncrement < -15)
                        rawDelta.setY(-delta);
                }
            }
            if (scrollingDevice.orientations & Qt::Horizontal) {
                if (xi2GetValuatorValueIfSet(xiDeviceEvent, scrollingDevice.horizontalIndex, &value)) {
                    double delta = scrollingDevice.lastScrollPosition.x() - value;
                    scrollingDevice.lastScrollPosition.setX(value);
                    angleDelta.setX((delta / scrollingDevice.horizontalIncrement) * 120);
                    // See comment under vertical
                    if (scrollingDevice.horizontalIncrement > 15)
                        rawDelta.setX(delta);
                    else if (scrollingDevice.horizontalIncrement < -15)
                        rawDelta.setX(-delta);
                }
            }
            if (!angleDelta.isNull()) {
                QPoint local(fixed1616ToReal(xiDeviceEvent->event_x), fixed1616ToReal(xiDeviceEvent->event_y));
                QPoint global(fixed1616ToReal(xiDeviceEvent->root_x), fixed1616ToReal(xiDeviceEvent->root_y));
                Qt::KeyboardModifiers modifiers = keyboard()->translateModifiers(xiDeviceEvent->mods.effective_mods);
                if (modifiers & Qt::AltModifier) {
                    std::swap(angleDelta.rx(), angleDelta.ry());
                    std::swap(rawDelta.rx(), rawDelta.ry());
                }
                QWindowSystemInterface::handleWheelEvent(platformWindow->window(), xiEvent->time, local, global, rawDelta, angleDelta, modifiers);
            }
        }
    } else if (xiEvent->evtype == XI_ButtonRelease && scrollingDevice.legacyOrientations) {
        xXIDeviceEvent* xiDeviceEvent = reinterpret_cast<xXIDeviceEvent *>(event);
        if (QXcbWindow *platformWindow = platformWindowFromId(xiDeviceEvent->event)) {
            QPoint angleDelta;
            if (scrollingDevice.legacyOrientations & Qt::Vertical) {
                if (xiDeviceEvent->detail == 4)
                    angleDelta.setY(120);
                else if (xiDeviceEvent->detail == 5)
                    angleDelta.setY(-120);
            }
            if (scrollingDevice.legacyOrientations & Qt::Horizontal) {
                if (xiDeviceEvent->detail == 6)
                    angleDelta.setX(120);
                else if (xiDeviceEvent->detail == 7)
                    angleDelta.setX(-120);
            }
            if (!angleDelta.isNull()) {
                QPoint local(fixed1616ToReal(xiDeviceEvent->event_x), fixed1616ToReal(xiDeviceEvent->event_y));
                QPoint global(fixed1616ToReal(xiDeviceEvent->root_x), fixed1616ToReal(xiDeviceEvent->root_y));
                Qt::KeyboardModifiers modifiers = keyboard()->translateModifiers(xiDeviceEvent->mods.effective_mods);
                if (modifiers & Qt::AltModifier)
                    std::swap(angleDelta.rx(), angleDelta.ry());
                QWindowSystemInterface::handleWheelEvent(platformWindow->window(), xiEvent->time, local, global, QPoint(), angleDelta, modifiers);
            }
        }
    }
#else
    Q_UNUSED(event);
    Q_UNUSED(scrollingDevice);
#endif // XCB_USE_XINPUT21
}

Qt::MouseButton QXcbConnection::xiToQtMouseButton(uint32_t b)
{
    switch (b) {
    case 1: return Qt::LeftButton;
    case 2: return Qt::MiddleButton;
    case 3: return Qt::RightButton;
    // 4-7 are for scrolling
    default: break;
    }
    if (b >= 8 && b <= Qt::MaxMouseButton)
        return static_cast<Qt::MouseButton>(Qt::BackButton << (b - 8));
    return Qt::NoButton;
}

#ifdef XCB_USE_XINPUT22
bool QXcbConnection::isTouchScreen(int id) const
{
    auto device = m_touchDevices.value(id);
    return device && device->qtTouchDevice
        && device->qtTouchDevice->type() == QTouchDevice::TouchScreen;
}
#endif

#if QT_CONFIG(tabletevent)
static QTabletEvent::TabletDevice toolIdToTabletDevice(quint32 toolId) {
    // keep in sync with wacom_intuos_inout() in Linux kernel driver wacom_wac.c
    switch (toolId) {
    case 0xd12:
    case 0x912:
    case 0x112:
    case 0x913: /* Intuos3 Airbrush */
    case 0x91b: /* Intuos3 Airbrush Eraser */
    case 0x902: /* Intuos4/5 13HD/24HD Airbrush */
    case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
    case 0x100902: /* Intuos4/5 13HD/24HD Airbrush */
    case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
        return QTabletEvent::Airbrush;
    case 0x007: /* Mouse 4D and 2D */
    case 0x09c:
    case 0x094:
        return QTabletEvent::FourDMouse;
    case 0x017: /* Intuos3 2D Mouse */
    case 0x806: /* Intuos4 Mouse */
    case 0x096: /* Lens cursor */
    case 0x097: /* Intuos3 Lens cursor */
    case 0x006: /* Intuos4 Lens cursor */
        return QTabletEvent::Puck;
    case 0x885:    /* Intuos3 Art Pen (Marker Pen) */
    case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */
    case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */
        return QTabletEvent::RotationStylus;
    case 0:
        return QTabletEvent::NoDevice;
    }
    return QTabletEvent::Stylus;  // Safe default assumption if nonzero
}

static const char *toolName(QTabletEvent::TabletDevice tool) {
    static const QMetaObject *metaObject = qt_getEnumMetaObject(tool);
    static const QMetaEnum me = metaObject->enumerator(metaObject->indexOfEnumerator(qt_getEnumName(tool)));
    return me.valueToKey(tool);
}

static const char *pointerTypeName(QTabletEvent::PointerType ptype) {
    static const QMetaObject *metaObject = qt_getEnumMetaObject(ptype);
    static const QMetaEnum me = metaObject->enumerator(metaObject->indexOfEnumerator(qt_getEnumName(ptype)));
    return me.valueToKey(ptype);
}

bool QXcbConnection::xi2HandleTabletEvent(const void *event, TabletData *tabletData)
{
    bool handled = true;
    Display *xDisplay = static_cast<Display *>(m_xlib_display);
    const xXIGenericDeviceEvent *xiEvent = static_cast<const xXIGenericDeviceEvent *>(event);
    const xXIDeviceEvent *xiDeviceEvent = reinterpret_cast<const xXIDeviceEvent *>(xiEvent);

    switch (xiEvent->evtype) {
    case XI_ButtonPress: {
        Qt::MouseButton b = xiToQtMouseButton(xiDeviceEvent->detail);
        tabletData->buttons |= b;
        xi2ReportTabletEvent(xiEvent, tabletData);
        break;
    }
    case XI_ButtonRelease: {
        Qt::MouseButton b = xiToQtMouseButton(xiDeviceEvent->detail);
        tabletData->buttons ^= b;
        xi2ReportTabletEvent(xiEvent, tabletData);
        break;
    }
    case XI_Motion:
        xi2ReportTabletEvent(xiEvent, tabletData);
        break;
    case XI_PropertyEvent: {
        // This is the wacom driver's way of reporting tool proximity.
        // The evdev driver doesn't do it this way.
        const xXIPropertyEvent *ev = reinterpret_cast<const xXIPropertyEvent *>(event);
        if (ev->what == XIPropertyModified) {
            if (ev->property == atom(QXcbAtom::WacomSerialIDs)) {
                enum WacomSerialIndex {
                    _WACSER_USB_ID = 0,
                    _WACSER_LAST_TOOL_SERIAL,
                    _WACSER_LAST_TOOL_ID,
                    _WACSER_TOOL_SERIAL,
                    _WACSER_TOOL_ID,
                    _WACSER_COUNT
                };
                Atom propType;
                int propFormat;
                unsigned long numItems, bytesAfter;
                unsigned char *data;
                if (XIGetProperty(xDisplay, tabletData->deviceId, ev->property, 0, 100,
                                  0, AnyPropertyType, &propType, &propFormat,
                                  &numItems, &bytesAfter, &data) == Success) {
                    if (propType == atom(QXcbAtom::INTEGER) && propFormat == 32 && numItems == _WACSER_COUNT) {
                        quint32 *ptr = reinterpret_cast<quint32 *>(data);
                        quint32 tool = ptr[_WACSER_TOOL_ID];
                        // Workaround for http://sourceforge.net/p/linuxwacom/bugs/246/
                        // e.g. on Thinkpad Helix, tool ID will be 0 and serial will be 1
                        if (!tool && ptr[_WACSER_TOOL_SERIAL])
                            tool = ptr[_WACSER_TOOL_SERIAL];

                        // The property change event informs us which tool is in proximity or which one left proximity.
                        if (tool) {
                            tabletData->inProximity = true;
                            tabletData->tool = toolIdToTabletDevice(tool);
                            tabletData->serialId = qint64(ptr[_WACSER_USB_ID]) << 32 | qint64(ptr[_WACSER_TOOL_SERIAL]);
                            QWindowSystemInterface::handleTabletEnterProximityEvent(ev->time,
                                tabletData->tool, tabletData->pointerType, tabletData->serialId);
                        } else {
                            tabletData->inProximity = false;
                            tabletData->tool = toolIdToTabletDevice(ptr[_WACSER_LAST_TOOL_ID]);
                            // Workaround for http://sourceforge.net/p/linuxwacom/bugs/246/
                            // e.g. on Thinkpad Helix, tool ID will be 0 and serial will be 1
                            if (!tabletData->tool)
                                tabletData->tool = toolIdToTabletDevice(ptr[_WACSER_LAST_TOOL_SERIAL]);
                            tabletData->serialId = qint64(ptr[_WACSER_USB_ID]) << 32 | qint64(ptr[_WACSER_LAST_TOOL_SERIAL]);
                            QWindowSystemInterface::handleTabletLeaveProximityEvent(ev->time,
                                tabletData->tool, tabletData->pointerType, tabletData->serialId);
                        }
                        // TODO maybe have a hash of tabletData->deviceId to device data so we can
                        // look up the tablet name here, and distinguish multiple tablets
                        if (Q_UNLIKELY(lcQpaXInputEvents().isDebugEnabled()))
                            qCDebug(lcQpaXInputEvents, "XI2 proximity change on tablet %d (USB %x): last tool: %x id %x current tool: %x id %x %s",
                                    tabletData->deviceId, ptr[_WACSER_USB_ID], ptr[_WACSER_LAST_TOOL_SERIAL], ptr[_WACSER_LAST_TOOL_ID],
                                    ptr[_WACSER_TOOL_SERIAL], ptr[_WACSER_TOOL_ID], toolName(tabletData->tool));
                    }
                    XFree(data);
                }
            }
        }
        break;
    }
    default:
        handled = false;
        break;
    }

    return handled;
}

void QXcbConnection::xi2ReportTabletEvent(const void *event, TabletData *tabletData)
{
    const xXIDeviceEvent *ev = reinterpret_cast<const xXIDeviceEvent *>(event);
    QXcbWindow *xcbWindow = platformWindowFromId(ev->event);
    if (!xcbWindow)
        return;
    QWindow *window = xcbWindow->window();
    const Qt::KeyboardModifiers modifiers = keyboard()->translateModifiers(ev->mods.effective_mods);
    QPointF local(fixed1616ToReal(ev->event_x), fixed1616ToReal(ev->event_y));
    QPointF global(fixed1616ToReal(ev->root_x), fixed1616ToReal(ev->root_y));
    double pressure = 0, rotation = 0, tangentialPressure = 0;
    int xTilt = 0, yTilt = 0;

    for (QHash<int, TabletData::ValuatorClassInfo>::iterator it = tabletData->valuatorInfo.begin(),
            ite = tabletData->valuatorInfo.end(); it != ite; ++it) {
        int valuator = it.key();
        TabletData::ValuatorClassInfo &classInfo(it.value());
        xi2GetValuatorValueIfSet(event, classInfo.number, &classInfo.curVal);
        double normalizedValue = (classInfo.curVal - classInfo.minVal) / (classInfo.maxVal - classInfo.minVal);
        switch (valuator) {
        case QXcbAtom::AbsPressure:
            pressure = normalizedValue;
            break;
        case QXcbAtom::AbsTiltX:
            xTilt = classInfo.curVal;
            break;
        case QXcbAtom::AbsTiltY:
            yTilt = classInfo.curVal;
            break;
        case QXcbAtom::AbsWheel:
            switch (tabletData->tool) {
            case QTabletEvent::Airbrush:
                tangentialPressure = normalizedValue * 2.0 - 1.0; // Convert 0..1 range to -1..+1 range
                break;
            case QTabletEvent::RotationStylus:
                rotation = normalizedValue * 360.0 - 180.0; // Convert 0..1 range to -180..+180 degrees
                break;
            default:    // Other types of styli do not use this valuator
                break;
            }
            break;
        default:
            break;
        }
    }

    if (Q_UNLIKELY(lcQpaXInputEvents().isDebugEnabled()))
        qCDebug(lcQpaXInputEvents, "XI2 event on tablet %d with tool %s type %s seq %d detail %d time %d "
            "pos %6.1f, %6.1f root pos %6.1f, %6.1f buttons 0x%x pressure %4.2lf tilt %d, %d rotation %6.2lf modifiers 0x%x",
            tabletData->deviceId, toolName(tabletData->tool), pointerTypeName(tabletData->pointerType),
            ev->sequenceNumber, ev->detail, ev->time,
            local.x(), local.y(), global.x(), global.y(),
            (int)tabletData->buttons, pressure, xTilt, yTilt, rotation, (int)modifiers);

    QWindowSystemInterface::handleTabletEvent(window, ev->time, local, global,
                                              tabletData->tool, tabletData->pointerType,
                                              tabletData->buttons, pressure,
                                              xTilt, yTilt, tangentialPressure,
                                              rotation, 0, tabletData->serialId, modifiers);
}

QXcbConnection::TabletData *QXcbConnection::tabletDataForDevice(int id)
{
    for (int i = 0; i < m_tabletData.count(); ++i) {
        if (m_tabletData.at(i).deviceId == id)
            return &m_tabletData[i];
    }
    return Q_NULLPTR;
}

#endif // QT_CONFIG(tabletevent)