/**************************************************************************** ** ** Copyright (C) 2016 The Qt Company Ltd. ** Contact: https://www.qt.io/licensing/ ** ** This file is part of the test suite of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:GPL-EXCEPT$ ** Commercial License Usage ** Licensees holding valid commercial Qt licenses may use this file in ** accordance with the commercial license agreement provided with the ** Software or, alternatively, in accordance with the terms contained in ** a written agreement between you and The Qt Company. For licensing terms ** and conditions see https://www.qt.io/terms-conditions. For further ** information use the contact form at https://www.qt.io/contact-us. ** ** GNU General Public License Usage ** Alternatively, this file may be used under the terms of the GNU ** General Public License version 3 as published by the Free Software ** Foundation with exceptions as appearing in the file LICENSE.GPL3-EXCEPT ** included in the packaging of this file. Please review the following ** information to ensure the GNU General Public License requirements will ** be met: https://www.gnu.org/licenses/gpl-3.0.html. ** ** $QT_END_LICENSE$ ** ****************************************************************************/ #include "tst_qmakelib.h" #include #include #include #include #include #ifdef Q_OS_WIN # define EVAL_DRIVE "R:" #else # define EVAL_DRIVE #endif void tst_qmakelib::addAssignments() { QTest::newRow("assignment") << "VAR = foo bar baz" << "VAR = foo bar baz" << "" << true; QTest::newRow("appending") << "VAR = foo bar baz\nVAR += foo gaz gaz" << "VAR = foo bar baz foo gaz gaz" << "" << true; QTest::newRow("unique appending") << "VAR = foo bar baz\nVAR *= foo gaz gaz" << "VAR = foo bar baz gaz" << "" << true; QTest::newRow("removing") << "VAR = foo bar foo baz\nVAR -= foo gaz gaz" << "VAR = bar baz" << "" << true; // Somewhat unexpectedly, the g modifier is implicit within each element. QTest::newRow("replacing") << "VAR = foo bar foo baz\nVAR ~= s,o,0," << "VAR = f00 bar foo baz" << "" << true; // Consistently with the "there are no empty elements", what becomes empty gets zapped. QTest::newRow("replacing with nothing") << "VAR = foo bar foo baz\nVAR ~= s,foo,," << "VAR = bar foo baz" << "" << true; QTest::newRow("replacing case-insensitively") << "VAR = foO bar foo baz\nVAR ~= s,o,0,i" << "VAR = f00 bar foo baz" << "" << true; // In all elements, not all within each/one/??? element. QTest::newRow("replacing globally") << "VAR = foo bar foo baz\nVAR ~= s,o,0,g" << "VAR = f00 bar f00 baz" << "" << true; // Replacing with the same string counts as no match. // This is rather questionable ... QTest::newRow("replacing with same") << "VAR = foo bar foo baz\nVAR ~= s,ba[rz],bar," << "VAR = foo bar foo bar" << "" << true; QTest::newRow("replacing with auto-quote") << "VAR = foo [bar] foo baz\nVAR ~= s,[bar],bar,q" << "VAR = foo bar foo baz" << "" << true; QTest::newRow("replacing with expansions") << "VAR = foo bar foo baz\nPAT = foo\nREPL = 'yee haw'\nVAR ~= s,$$PAT,$$REPL," << "VAR = 'yee haw' bar foo baz" << "" << true; QTest::newRow("~= with bad function") << "VAR ~= m/foo/" << "" << "##:1: The ~= operator can handle only the s/// function." << true; // rather questionable QTest::newRow("~= s with bad number of arguments") << "VAR ~= s/bla\nVAR ~= s/bla/foo//" << "" << "##:1: The s/// function expects 3 or 4 arguments.\n" "##:2: The s/// function expects 3 or 4 arguments." << true; // rather questionable } void tst_qmakelib::addExpansions() { QTest::newRow("expand variable") << "V1 = foo\nVAR = $$V1" << "VAR = foo" << "" << true; QTest::newRow("expand property") << "VAR = $$[P1]" << "VAR = 'prop val'" << "" << true; QTest::newRow("expand environment variable") << "VAR = $$(E1)" << "VAR = 'env var'" << "" << true; // These test addStr/addStr. QTest::newRow("expand: str $$(env)") << "VAR = foo $$(E1)" << "VAR = foo 'env var'" << "" << true; QTest::newRow("expand: str$$(env)") << "VAR = foo$$(E1)" << "VAR = 'fooenv var'" << "" << true; QTest::newRow("expand: 'str $$(env)'") << "VAR = 'foo $$(E1)'" << "VAR = 'foo env var'" << "" << true; // These test addStr/addStrList QTest::newRow("expand: str $$var") << "V1 = foo barbaz\nVAR = str $$V1" << "VAR = str foo barbaz" << "" << true; QTest::newRow("expand: $$var str") << "V1 = foo barbaz\nVAR = $$V1 str" << "VAR = foo barbaz str" << "" << true; QTest::newRow("expand: str$$var") << "V1 = foo barbaz\nVAR = str$$V1" << "VAR = strfoo barbaz" << "" << true; QTest::newRow("expand: $${var}str") << "V1 = foo barbaz\nVAR = $${V1}str" << "VAR = foo barbazstr" << "" << true; QTest::newRow("expand: 'str $$var'") << "V1 = foo barbaz\nVAR = 'str $$V1'" << "VAR = 'str foo barbaz'" << "" << true; QTest::newRow("expand: '$$var str'") << "V1 = foo barbaz\nVAR = '$$V1 str'" << "VAR = 'foo barbaz str'" << "" << true; // Same again in joined context QTest::newRow("expand joined: str $$(env)") << "VAR = $$quote(foo $$(E1))" << "VAR = 'foo env var'" << "" << true; QTest::newRow("expand joined: str$$(env)") << "VAR = $$quote(foo$$(E1))" << "VAR = 'fooenv var'" << "" << true; QTest::newRow("expand joined: 'str $$(env)'") << "VAR = $$quote('foo $$(E1)')" << "VAR = 'foo env var'" << "" << true; QTest::newRow("expand joined: str $$var") << "V1 = foo barbaz\nVAR = $$quote(str $$V1)" << "VAR = 'str foo barbaz'" << "" << true; QTest::newRow("expand joined: $$var str") << "V1 = foo barbaz\nVAR = $$quote($$V1 str)" << "VAR = 'foo barbaz str'" << "" << true; QTest::newRow("expand joined: str$$var") << "V1 = foo barbaz\nVAR = $$quote(str$$V1)" << "VAR = 'strfoo barbaz'" << "" << true; QTest::newRow("expand joined: $${var}str") << "V1 = foo barbaz\nVAR = $$quote($${V1}str)" << "VAR = 'foo barbazstr'" << "" << true; QTest::newRow("expand joined: 'str $$var'") << "V1 = foo barbaz\nVAR = $$quote('str $$V1')" << "VAR = 'str foo barbaz'" << "" << true; QTest::newRow("expand joined: '$$var str'") << "V1 = foo barbaz\nVAR = $$quote('$$V1 str')" << "VAR = 'foo barbaz str'" << "" << true; // Variable expansions on LHS QTest::newRow("indirect assign: $$var") << "V = VAR\n$$V = foo" << "VAR = foo" << "" << true; QTest::newRow("indirect assign: fix$$var") << "V = AR\nV$$V = foo" << "VAR = foo" << "" << true; QTest::newRow("indirect assign: $${var}fix") << "V = VA\n$${V}R = foo" << "VAR = foo" << "" << true; QTest::newRow("indirect assign: eval") << "V = VAR\n$$eval(V) = foo" << "VAR = foo" << "" << true; QTest::newRow("indirect assign: multiple") << "V = FOO BAR\n$$V = foo" << "" << "##:2: Left hand side of assignment must expand to exactly one word." << true; } void tst_qmakelib::addControlStructs() { QTest::newRow("true") << "true: VAR = 1" << "VAR = 1" << "" << true; QTest::newRow("false") << "false: VAR = 1" << "VAR = UNDEF" << "" << true; QTest::newRow("true-config") << "CONFIG += test\ntest: VAR = 1" << "VAR = 1" << "" << true; QTest::newRow("false-config") << "test: VAR = 1" << "VAR = UNDEF" << "" << true; QTest::newRow("true-wildcard") << "CONFIG += testing\ntest*: VAR = 1" << "VAR = 1" << "" << true; QTest::newRow("false-wildcard") << "test*: VAR = 1" << "VAR = UNDEF" << "" << true; QTest::newRow("true-else") << "true: VAR1 = 1\nelse: VAR2 = 1" << "VAR1 = 1\nVAR2 = UNDEF" << "" << true; QTest::newRow("false-else") << "false: VAR1 = 1\nelse: VAR2 = 1" << "VAR1 = UNDEF\nVAR2 = 1" << "" << true; QTest::newRow("true-else-true-else") << "true: VAR1 = 1\nelse: true: VAR2 = 1\nelse: VAR3 = 1" << "VAR1 = 1\nVAR2 = UNDEF\nVAR3 = UNDEF" << "" << true; QTest::newRow("true-else-false-else") << "true: VAR1 = 1\nelse: false: VAR2 = 1\nelse: VAR3 = 1" << "VAR1 = 1\nVAR2 = UNDEF\nVAR3 = UNDEF" << "" << true; QTest::newRow("false-else-true-else") << "false: VAR1 = 1\nelse: true: VAR2 = 1\nelse: VAR3 = 1" << "VAR1 = UNDEF\nVAR2 = 1\nVAR3 = UNDEF" << "" << true; QTest::newRow("false-else-false-else") << "false: VAR1 = 1\nelse: false: VAR2 = 1\nelse: VAR3 = 1" << "VAR1 = UNDEF\nVAR2 = UNDEF\nVAR3 = 1" << "" << true; QTest::newRow("true-{false-else}-else") << "true {\nfalse: VAR1 = 1\nelse: VAR2 = 1\n}\nelse: VAR3 = 1" << "VAR1 = UNDEF\nVAR2 = 1\nVAR3 = UNDEF" << "" << true; QTest::newRow("NOT-true") << "!true: VAR = 1" << "VAR = UNDEF" << "" << true; QTest::newRow("NOT-false") << "!false: VAR = 1" << "VAR = 1" << "" << true; QTest::newRow("true-AND-true") << "true:true: VAR = 1" << "VAR = 1" << "" << true; QTest::newRow("true-AND-false") << "true:false: VAR = 1" << "VAR = UNDEF" << "" << true; QTest::newRow("false-AND-true") << "false:true: VAR = 1" << "VAR = UNDEF" << "" << true; QTest::newRow("false-OR-false") << "false|false: VAR = 1" << "VAR = UNDEF" << "" << true; QTest::newRow("true-OR-false") << "true|false: VAR = 1" << "VAR = 1" << "" << true; QTest::newRow("false-OR-true") << "false|true: VAR = 1" << "VAR = 1" << "" << true; QTest::newRow("NOT-false-AND-true") << "!false:true: VAR = 1" << "VAR = 1" << "" << true; QTest::newRow("true-AND-message") << "true:message(hi): VAR = 1" << "VAR = 1" << "Project MESSAGE: hi" << true; QTest::newRow("false-AND-message") << "false:message(hi): VAR = 1" << "VAR = UNDEF" << "" << true; QTest::newRow("true-OR-message") << "true|message(hi): VAR = 1" << "VAR = 1" << "" << true; QTest::newRow("false-OR-message") << "false|message(hi): VAR = 1" << "VAR = 1" << "Project MESSAGE: hi" << true; QTest::newRow("true-OR-message-AND-false") << "true|message(hi):false: VAR = 1" << "VAR = UNDEF" << "" << true; QTest::newRow("false-OR-message-AND-false") << "false|message(hi):false: VAR = 1" << "VAR = UNDEF" << "Project MESSAGE: hi" << true; QTest::newRow("true (indirect)") << "TEST = true\n$$TEST: VAR = 1" << "VAR = 1" << "" << true; QTest::newRow("false (indirect)") << "TEST = false\n$$TEST: VAR = 1" << "VAR = UNDEF" << "" << true; // Yes, this is not supposed to work QTest::newRow("true|false (indirect)") << "TEST = true|false\n$$TEST: VAR = 1" << "VAR = UNDEF" << "" << true; QTest::newRow("for (var, var)") << "IN = one two three\nfor (IT, IN) { OUT += $$IT }" << "OUT = one two three" << "" << true; QTest::newRow("for (var, range)") << "for (IT, 1..3) { OUT += $$IT }" << "OUT = 1 2 3" << "" << true; QTest::newRow("for (var, reverse-range)") << "for (IT, 3..1) { OUT += $$IT }" << "OUT = 3 2 1" << "" << true; // This syntax is rather ridiculous. QTest::newRow("for (ever)") << "for (ever) {}" << "" << "##:1: Ran into infinite loop (> 1000 iterations)." << true; // This is even worse. QTest::newRow("for (VAR, forever)") << "for (VAR, forever) { OUT = $$VAR }" << "OUT = 999" << "##:1: Ran into infinite loop (> 1000 iterations)." << true; QTest::newRow("for (garbage)") << "for (garbage) { OUT = FAIL }" << "OUT = UNDEF" << "##:1: Invalid loop expression." << true; QTest::newRow("next()") << "IN = one two three\nfor (IT, IN) {\nequals(IT, two):next()\nOUT += $$IT\n}" << "OUT = one three" << "" << true; QTest::newRow("nested next()") << "IN = one two three\nfor (IT, IN) {\nfor (NIT, IN):next()\nOUT += $$IT\n}" << "OUT = one two three" << "" << true; QTest::newRow("break()") << "IN = one two three\nfor (IT, IN) {\nequals(IT, three):break()\nOUT += $$IT\n}" << "OUT = one two" << "" << true; QTest::newRow("nested break()") << "IN = one two three\nfor (IT, IN) {\nfor (NIT, IN):break()\nOUT += $$IT\n}" << "OUT = one two three" << "" << true; QTest::newRow("defineReplace()") << "defineReplace(func) { return($$1 + $$2) }\n" "VAR = $$func(test me, \"foo bar\")" << "VAR = test me + 'foo bar'" << "" << true; QTest::newRow("defineTest()") << "defineTest(func) { return($$1) }\n" "func(true): VAR += true\n" "func(false): VAR += false" << "VAR = true" << "" << true; QTest::newRow("true-AND-defineTest()") << "true: defineTest(func)\n" "defined(func): OK = 1" << "OK = 1" << "" << true; QTest::newRow("false-AND-defineTest()") << "false: defineTest(func)\n" "defined(func): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("true-OR-defineTest()") << "true| defineTest(func)\n" "defined(func): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("false-OR-defineTest()") << "false| defineTest(func)\n" "defined(func): OK = 1" << "OK = 1" << "" << true; QTest::newRow("variable scoping") << "defineTest(func) {\n" "VAR1 = modified\n!equals(VAR1, modified): return(false)\n" "VAR2 += modified\n!equals(VAR2, original modified): return(false)\n" "VAR3 = new var\n!equals(VAR3, new var): return(false)\n" "return(true)\n" "}\n" "VAR1 = pristine\nVAR2 = original\nfunc(): OK = 1" << "OK = 1\nVAR1 = pristine\nVAR2 = original\nVAR3 = UNDEF" << "" << true; QTest::newRow("function arguments") << "defineTest(func) {\n" "defined(1, var) {\nd1 = 1\nexport(d1)\n}\n" "defined(3, var) {\nd3 = 1\nexport(d3)\n}\n" "x1 = $$1\nexport(x1)\n" "2 += foo\nx2 = $$2\nexport(x2)\n" "x3 = $$3\nexport(x3)\n" "4 += foo\nx4 = $$4\nexport(x4)\n" "x5 = $$5\nexport(x5)\n" "6 += foo\nx6 = $$6\nexport(x6)\n" "}\n" "1 = first\n2 = second\n3 = third\n4 = fourth\nfunc(one, two)" << "1 = first\n2 = second\n3 = third\n4 = fourth\n5 = UNDEF\n6 = UNDEF\n" "d1 = 1\nd3 = UNDEF\nx1 = one\nx2 = two foo\nx3 =\nx4 = foo\nx5 =\nx6 = foo" << "" << true; QTest::newRow("ARGC and ARGS") << "defineTest(func) {\n" "export(ARGC)\n" "export(ARGS)\n" "}\n" "func(test me, \"foo bar\")" << "ARGC = 2\nARGS = test me 'foo bar'" << "" << true; QTest::newRow("recursion") << "defineReplace(func) {\n" "RET = *$$member(1, 0)*\n" "REST = $$member(1, 1, -1)\n" "!isEmpty(REST): RET += $$func($$REST)\n" "return($$RET)\n" "}\n" "VAR = $$func(you are ...)" << "VAR = *you* *are* *...*" << "" << true; QTest::newRow("bypassNesting()") << "defineTest(func) {\n" "LOCAL = 1\n" "bypassNesting() {\n" "OUT = 1\n" "!isEmpty(GLOBAL): OUT1 = 1\n" "!isEmpty(LOCAL): OUT2 = 1\n" "}\n" "}\n" "GLOBAL = 1\n" "func()" << "GLOBAL = 1\nLOCAL = UNDEF\nOUT = 1\nOUT1 = 1\nOUT2 = UNDEF" << "" << true; QTest::newRow("error() from bypassNesting()") << "defineTest(func) {\n" "bypassNesting() { error(error) }\n" "}\n" "func()\n" "OKE = 1" << "OKE = UNDEF" << "Project ERROR: error" << false; QTest::newRow("top-level return()") << "VAR = good\nreturn()\nVAR = bad" << "VAR = good" << "" << true; QTest::newRow("return() from function") << "defineTest(func) {\nVAR = good\nexport(VAR)\nreturn()\nVAR = bad\nexport(VAR)\n}\n" "func()" << "VAR = good" << "" << true; QTest::newRow("return() from nested function") << "defineTest(inner) {\nVAR = initial\nexport(VAR)\nreturn()\nVAR = bad\nexport(VAR)\n}\n" "defineTest(outer) {\ninner()\nVAR = final\nexport(VAR)\n}\n" "outer()" << "VAR = final" << "" << true; QTest::newRow("error() from replace function (assignment)") << "defineReplace(func) {\nerror(error)\n}\n" "VAR = $$func()\n" "OKE = 1" << "VAR = UNDEF\nOKE = UNDEF" << "Project ERROR: error" << false; QTest::newRow("error() from replace function (replacement)") << "defineReplace(func) {\nerror(error)\n}\n" "VAR = $$func()\n" "OKE = 1" << "VAR = UNDEF\nOKE = UNDEF" << "Project ERROR: error" << false; QTest::newRow("error() from replace function (LHS)") << "defineReplace(func) {\nerror(error)\nreturn(VAR)\n}\n" "$$func() = 1\n" "OKE = 1" << "VAR = UNDEF\nOKE = UNDEF" << "Project ERROR: error" << false; QTest::newRow("error() from replace function (loop variable)") << "defineReplace(func) {\nerror(error)\nreturn(BLAH)\n}\n" "for($$func()) {\nVAR = $$BLAH\nbreak()\n}\n" "OKE = 1" << "VAR = UNDEF\nOKE = UNDEF" << "Project ERROR: error" << false; QTest::newRow("error() from replace function (built-in test arguments)") << "defineReplace(func) {\nerror(error)\n}\n" "message($$func()): VAR = 1\n" "OKE = 1" << "VAR = UNDEF\nOKE = UNDEF" << "Project ERROR: error" << false; QTest::newRow("error() from replace function (built-in replace arguments)") << "defineReplace(func) {\nerror(error)\n}\n" "VAR = $$upper($$func())\n" "OKE = 1" << "VAR = UNDEF\nOKE = UNDEF" << "Project ERROR: error" << false; QTest::newRow("error() from replace function (custom test arguments)") << "defineReplace(func) {\nerror(error)\n}\n" "defineTest(custom) {\n}\n" "custom($$func()): VAR = 1\n" "OKE = 1" << "VAR = UNDEF\nOKE = UNDEF" << "Project ERROR: error" << false; QTest::newRow("error() from replace function (custom replace arguments)") << "defineReplace(func) {\nerror(error)\nreturn(1)\n}\n" "defineReplace(custom) {\nreturn($$1)\n}\n" "VAR = $$custom($$func(1))\n" "OKE = 1" << "VAR = UNDEF\nOKE = UNDEF" << "Project ERROR: error" << false; QTest::newRow("REQUIRES = error()") << "REQUIRES = error(error)\n" "OKE = 1" << "OKE = UNDEF" << "Project ERROR: error" << false; QTest::newRow("requires(error())") << "requires(error(error))\n" "OKE = 1" << "OKE = UNDEF" << "Project ERROR: error" << false; } void tst_qmakelib::addReplaceFunctions(const QString &qindir) { QTest::newRow("$$member(): empty") << "IN = \nVAR = $$member(IN)" << "VAR =" << "" << true; QTest::newRow("$$member(): too short") << "IN = one two three\nVAR = $$member(IN, 1, 5)" << "VAR =" // this is actually kinda stupid << "" << true; QTest::newRow("$$member(): ok") << "IN = one two three four five six seven\nVAR = $$member(IN, 1, 4)" << "VAR = two three four five" << "" << true; QTest::newRow("$$member(): ok (default start)") << "IN = one two three\nVAR = $$member(IN)" << "VAR = one" << "" << true; QTest::newRow("$$member(): ok (default end)") << "IN = one two three\nVAR = $$member(IN, 2)" << "VAR = three" << "" << true; QTest::newRow("$$member(): negative") << "IN = one two three four five six seven\nVAR = $$member(IN, -4, -3)" << "VAR = four five" << "" << true; QTest::newRow("$$member(): inverse") << "IN = one two three four five six seven\nVAR = $$member(IN, 4, 1)" << "VAR = five four three two" << "" << true; QTest::newRow("$$member(): dots") << "IN = one two three four five six seven\nVAR = $$member(IN, 1..4)" << "VAR = two three four five" << "" << true; QTest::newRow("$$member(): bad number of arguments") << "VAR = $$member(1, 2, 3, 4)" << "VAR =" << "##:1: member(var, start, end) requires one to three arguments." << true; QTest::newRow("$$member(): bad args (1)") << "IN = one two three\nVAR = $$member(IN, foo, 4)" << "VAR =" << "##:2: member() argument 2 (start) 'foo' invalid." << true; QTest::newRow("$$member(): bad args (2)") << "IN = one two three\nVAR = $$member(IN, foo..4)" << "VAR =" << "##:2: member() argument 2 (start) 'foo..4' invalid." << true; QTest::newRow("$$member(): bad args (3)") << "IN = one two three\nVAR = $$member(IN, 4, foo)" << "VAR =" << "##:2: member() argument 3 (end) 'foo' invalid." << true; QTest::newRow("$$member(): bad args (4)") << "IN = one two three\nVAR = $$member(IN, 4..foo)" << "VAR =" << "##:2: member() argument 2 (start) '4..foo' invalid." << true; // The argument processing is shared with $$member(), so some tests are skipped. QTest::newRow("$$str_member(): empty") << "VAR = $$str_member()" << "VAR =" << "" << true; QTest::newRow("$$str_member(): too short") << "VAR = $$str_member(string_value, 7, 12)" << "VAR =" // this is actually kinda stupid << "" << true; QTest::newRow("$$str_member(): ok") << "VAR = $$str_member(string_value, 7, 11)" << "VAR = value" << "" << true; QTest::newRow("$$str_member(): ok (default start)") << "VAR = $$str_member(string_value)" << "VAR = s" << "" << true; QTest::newRow("$$str_member(): ok (default end)") << "VAR = $$str_member(string_value, 7)" << "VAR = v" << "" << true; QTest::newRow("$$str_member(): negative") << "VAR = $$str_member(string_value, -5, -3)" << "VAR = val" << "" << true; QTest::newRow("$$str_member(): inverse") << "VAR = $$str_member(string_value, -2, 1)" << "VAR = ulav_gnirt" << "" << true; QTest::newRow("$$first(): empty") << "IN = \nVAR = $$first(IN)" << "VAR =" << "" << true; QTest::newRow("$$first(): one") << "IN = one\nVAR = $$first(IN)" << "VAR = one" << "" << true; QTest::newRow("$$first(): multiple") << "IN = one two three\nVAR = $$first(IN)" << "VAR = one" << "" << true; QTest::newRow("$$first(): bad number of arguments") << "VAR = $$first(1, 2)" << "VAR =" << "##:1: first(var) requires one argument." << true; QTest::newRow("$$take_first(): empty") << "IN = \nVAR = $$take_first(IN)" << "VAR =\nIN =" << "" << true; QTest::newRow("$$take_first(): one") << "IN = one\nVAR = $$take_first(IN)" << "VAR = one\nIN =" << "" << true; QTest::newRow("$$take_first(): multiple") << "IN = one two three\nVAR = $$take_first(IN)" << "VAR = one\nIN = two three" << "" << true; QTest::newRow("$$take_first(): bad number of arguments") << "VAR = $$take_first(1, 2)" << "VAR =" << "##:1: take_first(var) requires one argument." << true; QTest::newRow("$$last(): empty") << "IN = \nVAR = $$last(IN)" << "VAR =" << "" << true; QTest::newRow("$$last(): one") << "IN = one\nVAR = $$last(IN)" << "VAR = one" << "" << true; QTest::newRow("$$last(): multiple") << "IN = one two three\nVAR = $$last(IN)" << "VAR = three" << "" << true; QTest::newRow("$$last(): bad number of arguments") << "VAR = $$last(1, 2)" << "VAR =" << "##:1: last(var) requires one argument." << true; QTest::newRow("$$take_last(): empty") << "IN = \nVAR = $$take_last(IN)" << "VAR =\nIN =" << "" << true; QTest::newRow("$$take_last(): one") << "IN = one\nVAR = $$take_last(IN)" << "VAR = one\nIN =" << "" << true; QTest::newRow("$$take_last(): multiple") << "IN = one two three\nVAR = $$take_last(IN)" << "VAR = three\nIN = one two" << "" << true; QTest::newRow("$$take_last(): bad number of arguments") << "VAR = $$take_last(1, 2)" << "VAR =" << "##:1: take_last(var) requires one argument." << true; QTest::newRow("$$size()") << "IN = one two three\nVAR = $$size(IN)" << "VAR = 3" << "" << true; QTest::newRow("$$size(): bad number of arguments") << "VAR = $$size(1, 2)" << "VAR =" << "##:1: size(var) requires one argument." << true; QTest::newRow("$$str_size()") << "VAR = $$str_size(one two three)" << "VAR = 13" << "" << true; QTest::newRow("$$str_size(): bad number of arguments") << "VAR = $$str_size(1, 2)" << "VAR =" << "##:1: str_size(str) requires one argument." << true; QTest::newRow("$$fromfile(): right var") << "VAR = $$fromfile(" + qindir + "/fromfile/infile.prx, DEFINES)" << "VAR = QT_DLL" << "" << true; QTest::newRow("$$fromfile(): wrong var") << "VAR = $$fromfile(" + qindir + "/fromfile/infile.prx, INCLUDES)" << "VAR =" << "" << true; QTest::newRow("$$fromfile(): bad file") << "VAR = $$fromfile(" + qindir + "/fromfile/badfile.prx, DEFINES)" << "VAR =" << "Project ERROR: fail!" << true; QTest::newRow("$$fromfile(): bad number of arguments") << "VAR = $$fromfile(1) \\\n$$fromfile(1, 2, 3)" << "VAR =" << "##:1: fromfile(file, variable) requires two arguments.\n" "##:2: fromfile(file, variable) requires two arguments." << true; QTest::newRow("$$eval()") << "IN = one two three\nVAR = $$eval(IN)" << "VAR = one two three" << "" << true; QTest::newRow("$$eval(): bad number of arguments") << "VAR = $$eval(1, 2)" << "VAR =" << "##:1: eval(variable) requires one argument." << true; QTest::newRow("$$list()") << "VARNAME = $$list(one, two three, 'four five')\nVAR = $$eval($$VARNAME)" << "VAR = one two three four five" // total nonsense ... << "" << true; QTest::newRow("$$sprintf()") << "VAR = $$sprintf(hello %1 %2, you, there)" << "VAR = 'hello you there'" << "" << true; QTest::newRow("$$format_number(): simple number format") << "VAR = $$format_number(13)" << "VAR = 13" << "" << true; QTest::newRow("$$format_number(): negative number format") << "VAR = $$format_number(-13)" << "VAR = -13" << "" << true; QTest::newRow("$$format_number(): hex input number format") << "VAR = $$format_number(13, ibase=16)" << "VAR = 19" << "" << true; QTest::newRow("$$format_number(): hex output number format") << "VAR = $$format_number(13, obase=16)" << "VAR = d" << "" << true; QTest::newRow("$$format_number(): right aligned number format") << "VAR = $$format_number(13, width=5)" << "VAR = ' 13'" << "" << true; QTest::newRow("$$format_number(): left aligned number format") << "VAR = $$format_number(13, width=5 leftalign)" << "VAR = '13 '" << "" << true; QTest::newRow("$$format_number(): zero-padded number format") << "VAR = $$format_number(13, width=5 zeropad)" << "VAR = 00013" << "" << true; QTest::newRow("$$format_number(): always signed number format") << "VAR = $$format_number(13, width=5 alwayssign)" << "VAR = ' +13'" << "" << true; QTest::newRow("$$format_number(): zero-padded always signed number format") << "VAR = $$format_number(13, width=5 alwayssign zeropad)" << "VAR = +0013" << "" << true; QTest::newRow("$$format_number(): sign-padded number format") << "VAR = $$format_number(13, width=5 padsign)" << "VAR = ' 13'" << "" << true; QTest::newRow("$$format_number(): zero-padded sign-padded number format") << "VAR = $$format_number(13, width=5 padsign zeropad)" << "VAR = ' 0013'" << "" << true; QTest::newRow("$$format_number(): bad number of arguments") << "VAR = $$format_number(13, 1, 2)" << "VAR =" << "##:1: format_number(number[, options...]) requires one or two arguments." << true; QTest::newRow("$$format_number(): invalid option") << "VAR = $$format_number(13, foo=bar)" << "VAR =" << "##:1: format_number(): invalid format option foo=bar." << true; QTest::newRow("$$num_add(): one") << "VAR = $$num_add(10)" << "VAR = 10" << "" << true; QTest::newRow("$$num_add(): two") << "VAR = $$num_add(1, 2)" << "VAR = 3" << "" << true; QTest::newRow("$$num_add(): three") << "VAR = $$num_add(1, 3, 5)" << "VAR = 9" << "" << true; QTest::newRow("$$num_add(): negative") << "VAR = $$num_add(7, -13)" << "VAR = -6" << "" << true; QTest::newRow("$$num_add(): bad number of arguments") << "VAR = $$num_add()" << "VAR = " << "##:1: num_add(num, ...) requires at least one argument." << true; QTest::newRow("$$num_add(): bad number: float") << "VAR = $$num_add(1.1)" << "VAR =" << "##:1: num_add(): floats are currently not supported." << true; QTest::newRow("$$num_add(): bad number: malformed") << "VAR = $$num_add(fail)" << "VAR =" << "##:1: num_add(): malformed number fail." << true; QTest::newRow("$$join(): empty") << "IN = \nVAR = $$join(IN, //)" << "VAR =" << "" << true; QTest::newRow("$$join(): multiple") << "IN = one two three\nVAR = $$join(IN, //)" << "VAR = one//two//three" << "" << true; QTest::newRow("$$join(): multiple surrounded") << "IN = one two three\nVAR = $$join(IN, //, <<, >>)" << "VAR = <>" << "" << true; QTest::newRow("$$join(): bad number of arguments") << "VAR = $$join(1, 2, 3, 4, 5)" << "VAR =" << "##:1: join(var, glue, before, after) requires one to four arguments." << true; QTest::newRow("$$split(): default sep") << "IN = 'one/two three' 'four / five'\nVAR = $$split(IN)" << "VAR = one/two three four / five" << "" << true; QTest::newRow("$$split(): specified sep") << "IN = 'one/two three' 'four / five'\nVAR = $$split(IN, /)" << "VAR = one 'two three' 'four ' ' five'" << "" << true; QTest::newRow("$$split(): bad number of arguments") << "VAR = $$split(1, 2, 3)" << "VAR =" << "##:1: split(var, sep) requires one or two arguments." << true; QTest::newRow("$$basename(): empty") << "IN = \nVAR = $$basename(IN)" << "VAR =" << "" << true; QTest::newRow("$$basename(): bare") << "IN = file\nVAR = $$basename(IN)" << "VAR = file" << "" << true; QTest::newRow("$$basename(): relative") << "IN = path/file\nVAR = $$basename(IN)" << "VAR = file" << "" << true; QTest::newRow("$$basename(): absolute") << "IN = \\\\path\\\\file\nVAR = $$basename(IN)" << "VAR = file" << "" << true; QTest::newRow("$$basename(): bad number of arguments") << "VAR = $$basename(1, 2)" << "VAR =" << "##:1: basename(var) requires one argument." << true; QTest::newRow("$$dirname(): empty") << "IN = \nVAR = $$dirname(IN)" << "VAR =" << "" << true; QTest::newRow("$$dirname(): bare") << "IN = file\nVAR = $$dirname(IN)" << "VAR =" << "" << true; QTest::newRow("$$dirname(): relative") << "IN = path/file\nVAR = $$dirname(IN)" << "VAR = path" << "" << true; QTest::newRow("$$dirname(): absolute") << "IN = \\\\path\\\\file\nVAR = $$dirname(IN)" << "VAR = \\\\path" << "" << true; QTest::newRow("$$dirname(): bad number of arguments") << "VAR = $$dirname(1, 2)" << "VAR =" << "##:1: dirname(var) requires one argument." << true; QTest::newRow("$$section(): explicit end") << "IN = one~two~three~four~five~six\nVAR = $$section(IN, ~, 2, 4)" << "VAR = three~four~five" << "" << true; QTest::newRow("$$section(): implicit end") << "IN = one~two~three~four~five~six\nVAR = $$section(IN, ~, 3)" << "VAR = four~five~six" << "" << true; QTest::newRow("$$section(): bad number of arguments") << "VAR = $$section(1, 2) \\\n$$section(1, 2, 3, 4, 5)" << "VAR =" << "##:1: section(var, sep, begin, end) requires three or four arguments.\n" "##:2: section(var, sep, begin, end) requires three or four arguments." << true; QTest::newRow("$$find()") << "IN = foo bar baz blubb\nVAR = $$find(IN, ^ba)" << "VAR = bar baz" << "" << true; QTest::newRow("$$find(): bad number of arguments") << "VAR = $$find(1) \\\n$$find(1, 2, 3)" << "VAR =" << "##:1: find(var, str) requires two arguments.\n" "##:2: find(var, str) requires two arguments." << true; // FIXME: $$cat() & $$system(): There is no way to generate the newlines // necessary for testing "multi-line" and "blob" mode adequately. // Note: these functions have *different* splitting behavior. // This gives split_value_list() an exercise QTest::newRow("$$cat(): default mode") << "VAR = $$cat(" + qindir + "/cat/file2.txt)" << "VAR = foo bar baz \"\\\"Hello, \\' world.\\\"\" post \"\\'Hello, \\\" world.\\'\" post \\\\\\\" \\\\\\' \\\\\\\\ \\\\a \\\\ nix \"\\\" \\\"\"" << "" << true; QTest::newRow("$$cat(): lines mode") << "VAR = $$cat(" + qindir + "/cat/file1.txt, lines)" << "VAR = '\"Hello, world.\"' 'foo bar baz'" << "" << true; QTest::newRow("$$cat(): bad number of arguments") << "VAR = $$cat(1, 2, 3)" << "VAR =" << "##:1: cat(file, singleline=true) requires one or two arguments." << true; QTest::newRow("$$system(): default mode") #ifdef Q_OS_WIN << "VAR = $$system('echo Hello, ^\"world.&& echo foo^\" bar baz')" #else << "VAR = $$system('echo Hello, \\\\\\\"world. && echo foo\\\\\\\" bar baz')" #endif << "VAR = Hello, '\"world. foo\"' bar baz" << "" << true; QTest::newRow("$$system(): lines mode") #ifdef Q_OS_WIN << "VAR = $$system('echo Hello, ^\"world.&& echo foo^\" bar baz', lines)" #else << "VAR = $$system('echo Hello, \\\\\\\"world. && echo foo\\\\\\\" bar baz', lines)" #endif << "VAR = 'Hello, \"world.' 'foo\" bar baz'" << "" << true; QTest::newRow("$$system(): bad number of arguments") << "VAR = $$system(1, 2, 3, 4)" << "VAR =" << "##:1: system(command, [mode], [stsvar]) requires one to three arguments." << true; QTest::newRow("$$unique()") << "IN = foo bar foo baz\nVAR = $$unique(IN)" << "VAR = foo bar baz" << "" << true; QTest::newRow("$$unique(): bad number of arguments") << "VAR = $$unique(1, 2)" << "VAR =" << "##:1: unique(var) requires one argument." << true; QTest::newRow("$$sorted()") << "IN = one two three\nVAR = $$sorted(IN)" << "VAR = one three two" << "" << true; QTest::newRow("$$sorted(): bad number of arguments") << "VAR = $$sorted(1, 2)" << "VAR =" << "##:1: sorted(var) requires one argument." << true; QTest::newRow("$$reverse()") << "IN = one two three\nVAR = $$reverse(IN)" << "VAR = three two one" << "" << true; QTest::newRow("$$reverse(): bad number of arguments") << "VAR = $$reverse(1, 2)" << "VAR =" << "##:1: reverse(var) requires one argument." << true; QTest::newRow("$$quote()") << "VAR = $$quote(foo bar, 'foo bar')" << "VAR = 'foo bar' 'foo bar'" << "" << true; // FIXME: \n and \r go untested, because there is no way to get them into the // expected result. And if there was one, this function would be unnecessary. // In other news, the behavior of backslash escaping makes no sense. QTest::newRow("$$escape_expand()") << "VAR = $$escape_expand(foo\\\\ttab\\\\\\\\slash\\\\invalid, verbatim)" << "VAR = 'foo\ttab\\\\\\\\slash\\\\invalid' verbatim" << "" << true; QTest::newRow("$$upper()") << "VAR = $$upper(kEwL, STuff)" << "VAR = KEWL STUFF" << "" << true; QTest::newRow("$$lower()") << "VAR = $$lower(kEwL, STuff)" << "VAR = kewl stuff" << "" << true; QTest::newRow("$$title()") << "VAR = $$title(kEwL, STuff)" << "VAR = Kewl Stuff" << "" << true; QTest::newRow("$$re_escape()") << "VAR = $$re_escape(one, hey.*you[funny]+people)" << "VAR = one hey\\\\.\\\\*you\\\\[funny\\\\]\\\\+people" << "" << true; QTest::newRow("$$val_escape()") << "IN = easy \"less easy\" sca$${LITERAL_HASH}ry" " crazy$$escape_expand(\\\\t\\\\r\\\\n)" " $$escape_expand(\\\\t)stuff \\'no\\\"way\\\\here\n" "VAR = $$val_escape(IN)" << "VAR = easy '\\\"less easy\\\"' sca\\$\\${LITERAL_HASH}ry" " crazy\\$\\$escape_expand(\\\\\\\\t\\\\\\\\r\\\\\\\\n)" " \\$\\$escape_expand(\\\\\\\\t)stuff \\\\\\'no\\\\\\\"way\\\\\\\\here" << "" << true; QTest::newRow("$$val_escape(): bad number of arguments") << "VAR = $$val_escape(1, 2)" << "VAR =" << "##:1: val_escape(var) requires one argument." << true; QTest::newRow("$$files(): non-recursive") << "VAR = $$files(" + qindir + "/files/file*.txt)" << "VAR = " + qindir + "/files/file1.txt " + qindir + "/files/file2.txt" << "" << true; QTest::newRow("$$files(): recursive") << "VAR = $$files(" + qindir + "/files/file*.txt, true)" << "VAR = " + qindir + "/files/file1.txt " + qindir + "/files/file2.txt " + qindir + "/files/dir/file1.txt " + qindir + "/files/dir/file2.txt" << "" << true; QTest::newRow("$$files(): bad number of arguments") << "VAR = $$files(1, 2, 3)" << "VAR =" << "##:1: files(pattern, recursive=false) requires one or two arguments." << true; #if 0 // FIXME: no emulated input layer QTest::newRow("$$prompt()") << "VAR = $$prompt(que)" << "VAR = whatever" << "Project PROMPT: que? " << true; #endif QTest::newRow("$$replace()") << "IN = foo 'bar baz'\nVAR = $$replace(IN, \\\\bba, hello)" << "VAR = foo 'hellor helloz'" << "" << true; QTest::newRow("$$replace(): bad number of arguments") << "VAR = $$replace(1, 2) \\\n$$replace(1, 2, 3, 4)" << "VAR =" << "##:1: replace(var, before, after) requires three arguments.\n" "##:2: replace(var, before, after) requires three arguments." << true; QTest::newRow("$$sort_depends()") << "foo.depends = bar baz\n" "bar.depends = baz bak duck\n" "baz.depends = bak\n" "bak.depends = duck\n" "VAR = $$sort_depends($$list(baz foo duck bar))" << "VAR = foo bar baz duck" << "" << true; QTest::newRow("$$resolve_depends(): basic") << "foo.depends = bar baz\n" "bar.depends = baz bak duck\n" "baz.depends = bak\n" "bak.depends = duck\n" "VAR = $$resolve_depends($$list(baz foo duck bar))" << "VAR = foo bar baz bak duck" << "" << true; QTest::newRow("$$resolve_depends(): prefix and multiple suffixes") << "MOD.foo.dep = bar baz\n" "MOD.bar.dep = baz bak\n" "MOD.bar.priv_dep = duck\n" "MOD.baz.dep = bak\n" "MOD.bak.dep = duck\n" "VAR = $$resolve_depends($$list(baz foo duck bar), MOD., .dep .priv_dep)" << "VAR = foo bar baz bak duck" << "" << true; QTest::newRow("$$resolve_depends(): priorities: b first") << "MOD.a.depends =\n" "MOD.b.depends =\n" "MOD.b.priority = 1\n" "MOD.c.depends = a b\n" "VAR = $$resolve_depends($$list(c), MOD.)" << "VAR = c b a" << "" << true; QTest::newRow("$$resolve_depends(): priorities: a first") << "MOD.a.depends =\n" "MOD.a.priority = 1\n" "MOD.b.depends =\n" "MOD.b.priority = 0\n" "MOD.c.depends = a b\n" "VAR = $$resolve_depends($$list(c), MOD.)" << "VAR = c a b" << "" << true; QTest::newRow("$$resolve_depends(): priorities: custom suffix") << "MOD.a.depends =\n" "MOD.a.prrt = 1\n" "MOD.b.depends =\n" "MOD.b.prrt = 0\n" "MOD.c.depends = a b\n" "VAR = $$resolve_depends($$list(c), MOD., .depends, .prrt)" << "VAR = c a b" << "" << true; QTest::newRow("$$resolve_depends(): bad number of arguments") << "VAR = $$resolve_depends(1, 2, 3, 4, 5)" << "VAR =" << "##:1: resolve_depends(var, [prefix, [suffixes, [prio-suffix]]]) requires one to four arguments." << true; QTest::newRow("$$enumerate_vars()") << "V1 = foo\nV2 = bar\nVAR = $$enumerate_vars()\n" "count(VAR, 2, >=):contains(VAR, V1):contains(VAR, V2): OK = 1" << "OK = 1" << "" << true; QTest::newRow("$$shadowed(): bare") << "VAR = $$shadowed(test.txt)" << "VAR = " + QMakeEvaluator::quoteValue(ProString(m_outdir + "/test.txt")) << "" << true; QTest::newRow("$$shadowed(): subdir") << "VAR = $$shadowed(" + qindir + "/sub/test.txt)" << "VAR = " + QMakeEvaluator::quoteValue(ProString(m_outdir + "/sub/test.txt")) << "" << true; QTest::newRow("$$shadowed(): outside source dir") << "VAR = $$shadowed(/some/random/path)" << "VAR =" << "" << true; QTest::newRow("$$shadowed(): bad number of arguments") << "VAR = $$shadowed(1, 2)" << "VAR =" << "##:1: shadowed(path) requires one argument." << true; QTest::newRow("$$absolute_path(): relative file") << "VAR = $$absolute_path(dir/file.ext)" << "VAR = " + qindir + "/dir/file.ext" << "" << true; QTest::newRow("$$absolute_path(): relative file & relative path") << "VAR = $$absolute_path(dir/file.ext, some/where)" << "VAR = " + qindir + "/some/where/dir/file.ext" << "" << true; QTest::newRow("$$absolute_path(): file & path") << "VAR = $$absolute_path(dir/file.ext, " EVAL_DRIVE "/root/sub)" << "VAR = " EVAL_DRIVE "/root/sub/dir/file.ext" << "" << true; #ifdef Q_OS_WIN QTest::newRow("$$absolute_path(): driveless file & absolute path") << "VAR = $$absolute_path(/root/sub/dir/file.ext, " EVAL_DRIVE "/other)" << "VAR = " EVAL_DRIVE "/root/sub/dir/file.ext" << "" << true; #endif QTest::newRow("$$absolute_path(): absolute file & path") << "VAR = $$absolute_path(" EVAL_DRIVE "/root/sub/dir/file.ext, " EVAL_DRIVE "/other)" << "VAR = " EVAL_DRIVE "/root/sub/dir/file.ext" << "" << true; QTest::newRow("$$absolute_path(): empty file & path") << "VAR = $$absolute_path('', " EVAL_DRIVE "/root/sub)" << "VAR = " EVAL_DRIVE "/root/sub" << "" << true; QTest::newRow("$$absolute_path(): bad number of arguments") << "VAR = $$absolute_path(1, 2, 3)" << "VAR =" << "##:1: absolute_path(path[, base]) requires one or two arguments." << true; QTest::newRow("$$relative_path(): relative file") << "VAR = $$relative_path(dir/file.ext)" << "VAR = dir/file.ext" << "" << true; QTest::newRow("$$relative_path(): relative file & relative path") << "VAR = $$relative_path(dir/file.ext, some/where)" << "VAR = dir/file.ext" << "" << true; QTest::newRow("$$relative_path(): relative file to empty") << "VAR = $$relative_path(dir/..)" << "VAR = ." << "" << true; #ifdef Q_OS_WIN QTest::newRow("$$relative_path(): driveless file & absolute path") << "VAR = $$relative_path(/root/sub/dir/file.ext, " EVAL_DRIVE "/root/sub)" << "VAR = dir/file.ext" << "" << true; #endif QTest::newRow("$$relative_path(): absolute file & path") << "VAR = $$relative_path(" EVAL_DRIVE "/root/sub/dir/file.ext, " EVAL_DRIVE "/root/sub)" << "VAR = dir/file.ext" << "" << true; QTest::newRow("$$relative_path(): empty file & path") << "VAR = $$relative_path('', " EVAL_DRIVE "/root/sub)" << "VAR = ." << "" << true; QTest::newRow("$$relative_path(): bad number of arguments") << "VAR = $$relative_path(1, 2, 3)" << "VAR =" << "##:1: relative_path(path[, base]) requires one or two arguments." << true; QTest::newRow("$$clean_path()") #ifdef Q_OS_WIN // This is actually kinda stupid. << "VAR = $$clean_path(foo//bar\\\\../baz/)" #else << "VAR = $$clean_path(foo//bar/../baz/)" #endif << "VAR = foo/baz" << "" << true; QTest::newRow("$$clean_path(): bad number of arguments") << "VAR = $$clean_path(1, 2)" << "VAR =" << "##:1: clean_path(path) requires one argument." << true; QTest::newRow("$$system_path()") << "VAR = $$system_path(foo/bar\\\\baz)" #ifdef Q_OS_WIN << "VAR = foo\\\\bar\\\\baz" #else << "VAR = foo/bar/baz" #endif << "" << true; QTest::newRow("$$system_path(): bad number of arguments") << "VAR = $$system_path(1, 2)" << "VAR =" << "##:1: system_path(path) requires one argument." << true; // This is is effectively $$system_path() in this test, as we load no specs QTest::newRow("$$shell_path()") << "VAR = $$shell_path(foo/bar\\\\baz)" #ifdef Q_OS_WIN << "VAR = foo\\\\bar\\\\baz" #else << "VAR = foo/bar/baz" #endif << "" << true; QTest::newRow("$$shell_path(): bad number of arguments") << "VAR = $$shell_path(1, 2)" << "VAR =" << "##:1: shell_path(path) requires one argument." << true; // The quoteArgs() test exercises this more thoroughly QTest::newRow("$$system_quote()") << "IN = \nVAR = $$system_quote(\"some nasty & ugly\\\" path & thing\\\\\")" #ifdef Q_OS_WIN << "VAR = \"\\\"some nasty & ugly\\\\\\\" path ^& thing\\\\\\\\^\\\"\"" #else << "VAR = \"'some nasty & ugly\\\" path & thing\\\\'\"" #endif << "" << true; QTest::newRow("$$system_quote(): bad number of arguments") << "VAR = $$system_quote(1, 2)" << "VAR =" << "##:1: system_quote(arg) requires one argument." << true; // This is is effectively $$system_path() in this test, as we load no specs QTest::newRow("$$shell_quote()") << "IN = \nVAR = $$shell_quote(\"some nasty & ugly\\\" path & thing\\\\\")" #ifdef Q_OS_WIN << "VAR = \"\\\"some nasty & ugly\\\\\\\" path ^& thing\\\\\\\\^\\\"\"" #else << "VAR = \"'some nasty & ugly\\\" path & thing\\\\'\"" #endif << "" << true; QTest::newRow("$$shell_quote(): bad number of arguments") << "VAR = $$shell_quote(1, 2)" << "VAR =" << "##:1: shell_quote(arg) requires one argument." << true; QTest::newRow("$$getenv()") << "VAR = $$getenv(E1)" << "VAR = 'env var'" << "" << true; QTest::newRow("$$getenv(): bad number of arguments") << "VAR = $$getenv(1, 2)" << "VAR =" << "##:1: getenv(arg) requires one argument." << true; } void tst_qmakelib::addTestFunctions(const QString &qindir) { QTest::newRow("defined(): found replace") << "defineReplace(func) {}\ndefined(func): OK = 1" << "OK = 1" << "" << true; QTest::newRow("defined(): found test") << "defineTest(func) {}\ndefined(func): OK = 1" << "OK = 1" << "" << true; QTest::newRow("defined(): not found") << "defined(func): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("defined(replace): found") << "defineReplace(func) {}\ndefined(func, replace): OK = 1" << "OK = 1" << "" << true; QTest::newRow("defined(replace): not found") << "defineTest(func) {}\ndefined(func, replace): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("defined(test): found") << "defineTest(func) {}\ndefined(func, test): OK = 1" << "OK = 1" << "" << true; QTest::newRow("defined(test): not found") << "defineReplace(func) {}\ndefined(func, test): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("defined(var): found") << "VAR = 1\ndefined(VAR, var): OK = 1" << "OK = 1" << "" << true; QTest::newRow("defined(var): not found") << "defined(VAR, var): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("defined(): invalid type") << "defined(VAR, nope): OK = 1" << "OK = UNDEF" << "##:1: defined(function, type): unexpected type [nope]." << true; QTest::newRow("defined(): bad number of arguments") << "defined(1, 2, 3): OK = 1" << "OK = UNDEF" << "##:1: defined(function, [\"test\"|\"replace\"|\"var\"]) requires one or two arguments." << true; QTest::newRow("export()") << "defineTest(func) {\n" "VAR1 += different\nexport(VAR1)\n" "unset(VAR2)\nexport(VAR2): OK = 1\nexport(OK)\n" "VAR3 = new var\nexport(VAR3)\n" "}\n" "VAR1 = entirely\nVAR2 = set\nfunc()" << "OK = 1\nVAR1 = entirely different\nVAR2 =\nVAR3 = new var" << "" << true; QTest::newRow("export(): bad number of arguments") << "export(1, 2): OK = 1" << "OK = UNDEF" << "##:1: export(variable) requires one argument." << true; QTest::newRow("infile(): found") << "infile(" + qindir + "/fromfile/infile.prx, DEFINES): OK = 1" << "OK = 1" << "" << true; QTest::newRow("infile(): not found") << "infile(" + qindir + "/fromfile/infile.prx, INCLUDES): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("infile(plain): found") << "infile(" + qindir + "/fromfile/infile.prx, DEFINES, QT_DLL): OK = 1" << "OK = 1" << "" << true; QTest::newRow("infile(plain): not found") << "infile(" + qindir + "/fromfile/infile.prx, DEFINES, NOPE): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("infile(regex): found") << "infile(" + qindir + "/fromfile/infile.prx, DEFINES, QT_.*): OK = 1" << "OK = 1" << "" << true; QTest::newRow("infile(regex): not found") << "infile(" + qindir + "/fromfile/infile.prx, DEFINES, NO.*): OK = 1" << "OK = UNDEF" << "" << true; // The early return is debatable, esp. as it's inconsistent with $$fromfile() QTest::newRow("infile(): bad file") << "infile(" + qindir + "/fromfile/badfile.prx, DEFINES): OK = 1\nOKE = 1" << "OK = UNDEF\nOKE = UNDEF" << "Project ERROR: fail!" << false; QTest::newRow("infile(): bad number of arguments") << "infile(1): OK = 1\ninfile(1, 2, 3, 4): OK = 1" << "OK = UNDEF" << "##:1: infile(file, var, [values]) requires two or three arguments.\n" "##:2: infile(file, var, [values]) requires two or three arguments." << true; QTest::newRow("requires()") << "requires(true, false, isEmpty(FOO), !isEmpty(BAR), true|false, true:false)" << "QMAKE_FAILED_REQUIREMENTS = false !isEmpty(BAR) true:false" << "" << true; // The sparator semantics are *very* questionable. // The return value semantics are rather questionable. QTest::newRow("eval()") << "eval(FOO = one, two$$escape_expand(\\\\n)BAR = blah$$escape_expand(\\\\n)error(fail)$$escape_expand(\\\\n)BAZ = nope)" << "FOO = one two\nBAR = blah\nBAZ = UNDEF" << "Project ERROR: fail" << true; QTest::newRow("if(): true") << "if(false|true): OK = 1" << "OK = 1" << "" << true; QTest::newRow("if(): true (space)") << "if(false| true): OK = 1" << "OK = 1" << "" << true; QTest::newRow("if(): true (spaces)") << "if( false | true ): OK = 1" << "OK = 1" << "" << true; QTest::newRow("if(): false") << "if(false:true): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("if(): false (space)") << "if(false: true): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("if(): false (spaces)") << "if( false : true ): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("if(): bad number of arguments") << "if(1, 2): OK = 1" << "OK = UNDEF" << "##:1: if(condition) requires one argument." << true; QTest::newRow("CONFIG(simple): true") << "CONFIG = debug release\nCONFIG(debug): OK = 1" << "OK = 1" << "" << true; QTest::newRow("CONFIG(simple): false") << "CONFIG = debug release\nCONFIG(nope): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("CONFIG(alt): true") << "CONFIG = debug release\nCONFIG(release, debug|release): OK = 1" << "OK = 1" << "" << true; QTest::newRow("CONFIG(alt): false (presence)") << "CONFIG = not here\nCONFIG(debug, debug|release): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("CONFIG(alt): false (order)") << "CONFIG = debug release\nCONFIG(debug, debug|release): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("CONFIG(): bad number of arguments") << "CONFIG(1, 2, 3): OK = 1" << "OK = UNDEF" << "##:1: CONFIG(config) requires one or two arguments." << true; QTest::newRow("contains(simple plain): true") << "VAR = one two three\ncontains(VAR, two): OK = 1" << "OK = 1" << "" << true; QTest::newRow("contains(simple plain): false") << "VAR = one two three\ncontains(VAR, four): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("contains(simple regex): true") << "VAR = one two three\ncontains(VAR, tw.*): OK = 1" << "OK = 1" << "" << true; QTest::newRow("contains(simple regex): false") << "VAR = one two three\ncontains(VAR, fo.*): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("contains(alt plain): true") << "VAR = one two three\ncontains(VAR, three, two|three): OK = 1" << "OK = 1" << "" << true; QTest::newRow("contains(alt plain): false (presence)") << "VAR = one four five\ncontains(VAR, three, two|three): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("contains(alt plain): false (order)") << "VAR = one two three\ncontains(VAR, two, two|three): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("contains(alt regex): true") << "VAR = one two three\ncontains(VAR, th.*, two|three): OK = 1" << "OK = 1" << "" << true; QTest::newRow("contains(alt regex): false (presence)") << "VAR = one four five\ncontains(VAR, th.*, two|three): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("contains(alt regex): false (order)") << "VAR = one two three\ncontains(VAR, tw.*, two|three): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("contains(): bad number of arguments") << "contains(1): OK = 1\ncontains(1, 2, 3, 4): OK = 1" << "OK = UNDEF" << "##:1: contains(var, val) requires two or three arguments.\n" "##:2: contains(var, val) requires two or three arguments." << true; QTest::newRow("count(): true") << "VAR = one two three\ncount(VAR, 3): OK = 1" << "OK = 1" << "" << true; QTest::newRow("count(): false") << "VAR = one two three\ncount(VAR, 4): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("count(operators): true") << "VAR = one two three\n" "count(VAR, 3, equals): OKE1 = 1\n" "count(VAR, 3, isEqual): OKE2 = 1\n" "count(VAR, 3, =): OKE3 = 1\n" "count(VAR, 3, ==): OKE4 = 1\n" "count(VAR, 2, greaterThan): OKG1 = 1\n" "count(VAR, 2, >): OKG2 = 1\n" "count(VAR, 2, >=): OKGE = 1\n" "count(VAR, 4, lessThan): OKL1 = 1\n" "count(VAR, 4, <): OKL2 = 1\n" "count(VAR, 4, <=): OKLE = 1\n" << "OKE1 = 1\nOKE2 = 1\nOKE3 = 1\nOKE4 = 1\n" "OKG1 = 1\nOKG2 = 1\nOKGE = 1\n" "OKL1 = 1\nOKL2 = 1\nOKLE = 1" << "" << true; QTest::newRow("count(operators): false") << "VAR = one two three\n" "count(VAR, 4, equals): OKE1 = 1\n" "count(VAR, 4, isEqual): OKE2 = 1\n" "count(VAR, 4, =): OKE3 = 1\n" "count(VAR, 4, ==): OKE4 = 1\n" "count(VAR, 3, greaterThan): OKG1 = 1\n" "count(VAR, 3, >): OKG2 = 1\n" "count(VAR, 4, >=): OKGE = 1\n" "count(VAR, 3, lessThan): OKL1 = 1\n" "count(VAR, 3, <): OKL2 = 1\n" "count(VAR, 2, <=): OKLE = 1\n" << "OKE1 = UNDEF\nOKE2 = UNDEF\nOKE3 = UNDEF\nOKE4 = UNDEF\n" "OKG1 = UNDEF\nOKG2 = UNDEF\nOKGE = UNDEF\n" "OKL1 = UNDEF\nOKL2 = UNDEF\nOKLE = UNDEF" << "" << true; QTest::newRow("count(): bad operator") << "VAR = one two three\ncount(VAR, 2, !!!): OK = 1" << "OK = UNDEF" << "##:2: Unexpected modifier to count(!!!)." << true; QTest::newRow("count(): bad number of arguments") << "count(1): OK = 1\ncount(1, 2, 3, 4): OK = 1" << "OK = UNDEF" << "##:1: count(var, count, op=\"equals\") requires two or three arguments.\n" "##:2: count(var, count, op=\"equals\") requires two or three arguments." << true; QTest::newRow("greaterThan(int): true") << "VAR = 20\ngreaterThan(VAR, 3): OK = 1" << "OK = 1" << "" << true; QTest::newRow("greaterThan(int): false") << "VAR = 3\ngreaterThan(VAR, 20): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("greaterThan(string): true") << "VAR = foo 3\ngreaterThan(VAR, foo 20): OK = 1" << "OK = 1" << "" << true; QTest::newRow("greaterThan(string): false") << "VAR = foo 20\ngreaterThan(VAR, foo 3): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("greaterThan(): bad number of arguments") << "greaterThan(1): OK = 1\ngreaterThan(1, 2, 3): OK = 1" << "OK = UNDEF" << "##:1: greaterThan(variable, value) requires two arguments.\n" "##:2: greaterThan(variable, value) requires two arguments." << true; QTest::newRow("lessThan(int): true") << "VAR = 3\nlessThan(VAR, 20): OK = 1" << "OK = 1" << "" << true; QTest::newRow("lessThan(int): false") << "VAR = 20\nlessThan(VAR, 3): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("lessThan(string): true") << "VAR = foo 20\nlessThan(VAR, foo 3): OK = 1" << "OK = 1" << "" << true; QTest::newRow("lessThan(string): false") << "VAR = foo 3\nlessThan(VAR, foo 20): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("lessThan(): bad number of arguments") << "lessThan(1): OK = 1\nlessThan(1, 2, 3): OK = 1" << "OK = UNDEF" << "##:1: lessThan(variable, value) requires two arguments.\n" "##:2: lessThan(variable, value) requires two arguments." << true; QTest::newRow("equals(): true") << "VAR = foo\nequals(VAR, foo): OK = 1" << "OK = 1" << "" << true; QTest::newRow("equals(): false") << "VAR = foo\nequals(VAR, bar): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("equals(): bad number of arguments") << "equals(1): OK = 1\nequals(1, 2, 3): OK = 1" << "OK = UNDEF" << "##:1: equals(variable, value) requires two arguments.\n" "##:2: equals(variable, value) requires two arguments." << true; // That's just an alias, so don't test much. QTest::newRow("isEqual(): true") << "VAR = foo\nisEqual(VAR, foo): OK = 1" << "OK = 1" << "" << true; QTest::newRow("versionAtLeast(): true") << "VAR = 1.2.3\nversionAtLeast(VAR, 1.2.3): OK = 1" << "OK = 1" << "" << true; QTest::newRow("versionAtLeast(): false") << "VAR = 1.2.2\nversionAtLeast(VAR, 1.2.3): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("versionAtLeast(): bad number of arguments") << "versionAtLeast(1): OK = 1\nversionAtLeast(1, 2, 3): OK = 1" << "OK = UNDEF" << "##:1: versionAtLeast(variable, versionNumber) requires two arguments.\n" "##:2: versionAtLeast(variable, versionNumber) requires two arguments." << true; QTest::newRow("versionAtMost(): true") << "VAR = 1.2.3\nversionAtMost(VAR, 1.2.3): OK = 1" << "OK = 1" << "" << true; QTest::newRow("versionAtMost(): false") << "VAR = 1.2.3\nversionAtMost(VAR, 1.2.2): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("versionAtMost(): bad number of arguments") << "versionAtMost(1): OK = 1\nversionAtMost(1, 2, 3): OK = 1" << "OK = UNDEF" << "##:1: versionAtMost(variable, versionNumber) requires two arguments.\n" "##:2: versionAtMost(variable, versionNumber) requires two arguments." << true; QTest::newRow("clear(): top-level") << "VAR = there\nclear(VAR): OK = 1" << "OK = 1\nVAR =" << "" << true; QTest::newRow("clear(): scoped") << "defineTest(func) {\n" "clear(VAR): OK = 1\nexport(OK)\n" "equals(VAR, \"\"): OKE = 1\nexport(OKE)\n" "}\n" "VAR = there\nfunc()" << "OK = 1\nOKE = 1" << "" << true; QTest::newRow("clear(): absent") << "clear(VAR): OK = 1" << "OK = UNDEF\nVAR = UNDEF" << "" << true; QTest::newRow("clear(): bad number of arguments") << "clear(1, 2): OK = 1" << "OK = UNDEF" << "##:1: clear(variable) requires one argument." << true; QTest::newRow("unset(): top-level") << "VAR = there\nunset(VAR): OK = 1" << "OK = 1\nVAR = UNDEF" << "" << true; QTest::newRow("unset(): scoped") << "defineTest(func) {\n" "unset(VAR): OK = 1\nexport(OK)\n" "!defined(VAR, var): OKE = 1\nexport(OKE)\n" "}\n" "VAR = there\nfunc()" << "OK = 1\nOKE = 1" << "" << true; QTest::newRow("unset(): absent") << "unset(VAR): OK = 1" << "OK = UNDEF\nVAR = UNDEF" << "" << true; QTest::newRow("unset(): bad number of arguments") << "unset(1, 2): OK = 1" << "OK = UNDEF" << "##:1: unset(variable) requires one argument." << true; // This function does not follow the established naming pattern. QTest::newRow("parseJson()") << "jsontext = \\\n" " \"{\"\\\n" " \" \\\"array\\\" : [\\\"arrayItem1\\\", \\\"arrayItem2\\\", \\\"arrayItem3\\\"],\"\\\n" " \" \\\"object\\\" : { \\\"key1\\\" : \\\"objectValue1\\\", \\\"key2\\\" : \\\"objectValue2\\\" },\"\\\n" " \" \\\"string\\\" : \\\"test string\\\",\"\\\n" " \" \\\"number\\\" : 999,\"\\\n" " \" \\\"true\\\" : true,\"\\\n" " \" \\\"false\\\" :false,\"\"\\\n" " \" \\\"null\\\" : null\"\"\\\n" " \"}\"\n" "parseJson(jsontext, json): OK = 1" << "OK = 1\n" "json._KEYS_ = array false null number object string true\n" // array "json.array._KEYS_ = 0 1 2\n" "json.array.0 = arrayItem1\n" "json.array.1 = arrayItem2\n" "json.array.2 = arrayItem3\n" // object "json.object._KEYS_ = key1 key2\n" "json.object.key1 = objectValue1\n" "json.object.key1 = objectValue1\n" // value types "json.string = 'test string'\n" "json.number = 999\n" "json.true = true\n" "json.false = false\n" "json.null = UNDEF" << "" << true; QTest::newRow("parseJson(): bad input") << "jsontext = not good\n" "parseJson(jsontext, json): OK = 1" << "OK = UNDEF" << "##:2: Error parsing JSON at 1:1: illegal value" << true; QTest::newRow("parseJson(): bad number of arguments") << "parseJson(1): OK = 1\nparseJson(1, 2, 3): OK = 1" << "OK = UNDEF" << "##:1: parseJson(variable, into) requires two arguments.\n" "##:2: parseJson(variable, into) requires two arguments." << true; QTest::newRow("include()") << "include(include/inc.pri): OK = 1\nfunc()" << "OK = 1\nVAR = val\n.VAR = nope" << "Project MESSAGE: say hi!" << true; QTest::newRow("include(): fail") << "include(include/nope.pri): OK = 1" << "OK = UNDEF" #ifdef Q_OS_WIN << "Cannot read " + m_indir + "/include/nope.pri: The system cannot find the file specified." #else << "Cannot read " + m_indir + "/include/nope.pri: No such file or directory" #endif << true; QTest::newRow("include(): silent fail") << "include(include/nope.pri, , true): OK = 1" << "OK = 1" << "" << true; QTest::newRow("include(into)") << "SUB.MISS = 1\ninclude(include/inc.pri, SUB): OK = 1" << "OK = 1\nSUB.VAR = val\nSUB..VAR = UNDEF\nSUB.MISS = UNDEF\n" // As a side effect, we test some things that need full project setup "SUB.MATCH = 1\nSUB.QMAKESPEC = " + qindir + "/mkspecs/fake-g++" << "" << true; QTest::newRow("include(): bad number of arguments") << "include(1, 2, 3, 4): OK = 1" << "OK = UNDEF" << "##:1: include(file, [into, [silent]]) requires one, two or three arguments." << true; QTest::newRow("load()") << "load(testfeat): OK = 1" << "OK = 1\nVAR = foo bar" << "" << true; QTest::newRow("load(): fail") << "load(no_such_feature): OK = 1" << "OK = UNDEF" << "##:1: Cannot find feature no_such_feature" << true; QTest::newRow("load(): silent fail") << "load(no_such_feature, true): OK = 1" << "OK = 1" << "" << true; QTest::newRow("load(): bad number of arguments") << "load(1, 2, 3): OK = 1" << "OK = UNDEF" << "##:1: load(feature) requires one or two arguments." << true; QTest::newRow("discard_from()") << "HERE = 1\nPLUS = one\n" "defineTest(tfunc) {}\ndefineReplace(rfunc) {}\n" "include(include/inc.pri)\n" "contains(QMAKE_INTERNAL_INCLUDED_FILES, .*/include/inc\\\\.pri): PRE = 1\n" "discard_from(include/inc.pri): OK = 1\n" "!contains(QMAKE_INTERNAL_INCLUDED_FILES, .*/include/inc\\\\.pri): POST = 1\n" "defined(tfunc, test): TDEF = 1\ndefined(rfunc, replace): RDEF = 1\n" "defined(func, test): DTDEF = 1\ndefined(func, replace): DRDEF = 1\n" << "PRE = 1\nPOST = 1\nOK = 1\nHERE = 1\nPLUS = one\nVAR = UNDEF\n" "TDEF = 1\nRDEF = 1\nDTDEF = UNDEF\nDRDEF = UNDEF" << "" << true; QTest::newRow("discard_from(): bad number of arguments") << "discard_from(1, 2): OK = 1" << "OK = UNDEF" << "##:1: discard_from(file) requires one argument." << true; // We don't test debug() and log(), because they print directly to stderr. QTest::newRow("message()") << "message('Hello, World!'): OK = 1\nOKE = 1" << "OK = 1\nOKE = 1" << "Project MESSAGE: Hello, World!" << true; // Don't test that for warning() and error(), as it's the same code path. QTest::newRow("message(): bad number of arguments") << "message(1, 2): OK = 1" << "OK = UNDEF" << "##:1: message(message) requires one argument." << true; QTest::newRow("warning()") << "warning('World, be warned!'): OK = 1\nOKE = 1" << "OK = 1\nOKE = 1" << "Project WARNING: World, be warned!" << true; QTest::newRow("error(message)") << "error('World, you FAIL!'): OK = 1\nOKE = 1" << "OK = UNDEF\nOKE = UNDEF" << "Project ERROR: World, you FAIL!" << false; QTest::newRow("error(empty)") << "error(): OK = 1\nOKE = 1" << "OK = UNDEF\nOKE = UNDEF" << "" << false; QTest::newRow("if(error())") << "if(error(\\'World, you FAIL!\\')): OK = 1\nOKE = 1" << "OK = UNDEF\nOKE = UNDEF" << "Project ERROR: World, you FAIL!" << false; QTest::newRow("system()") << "system('" #ifdef Q_OS_WIN "cd" #else "pwd" #endif "> '" + QMakeEvaluator::quoteValue(ProString(QDir::toNativeSeparators( m_outdir + "/system_out.txt"))) + "): OK = 1\n" "DIR = $$cat(" + QMakeEvaluator::quoteValue(ProString( m_outdir + "/system_out.txt")) + ")" << "OK = 1\nDIR = " + QMakeEvaluator::quoteValue(ProString(QDir::toNativeSeparators(m_indir))) << "" << true; QTest::newRow("system(): fail") #ifdef Q_OS_WIN << "system(no_such_cmd 2> NUL): OK = 1" #else << "system(no_such_cmd 2> /dev/null): OK = 1" #endif << "OK = UNDEF" << "" << true; QTest::newRow("system(): bad number of arguments") << "system(1, 2): OK = 1" << "OK = UNDEF" << "##:1: system(exec) requires one argument." << true; QTest::newRow("isEmpty(): true (empty)") << "VAR =\nisEmpty(VAR): OK = 1" << "OK = 1" << "" << true; QTest::newRow("isEmpty(): true (undef)") << "isEmpty(VAR): OK = 1" << "OK = 1" << "" << true; QTest::newRow("isEmpty(): false") << "VAR = val\nisEmpty(VAR): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("isEmpty(): bad number of arguments") << "isEmpty(1, 2): OK = 1" << "OK = UNDEF" << "##:1: isEmpty(var) requires one argument." << true; QTest::newRow("exists(plain): true") << "exists(files/file1.txt): OK = 1" << "OK = 1" << "" << true; QTest::newRow("exists(plain): false") << "exists(files/not_there.txt): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("exists(wildcard): true") << "exists(files/fil*.txt): OK = 1" << "OK = 1" << "" << true; QTest::newRow("exists(wildcard): false") << "exists(files/not_th*.txt): OK = 1" << "OK = UNDEF" << "" << true; QTest::newRow("exists(): bad number of arguments") << "exists(1, 2): OK = 1" << "OK = UNDEF" << "##:1: exists(file) requires one argument." << true; QString wpath = QMakeEvaluator::quoteValue(ProString(m_outdir + "/outdir/written.txt")); QTest::newRow("write_file(): create") << "VAR = 'this is text' 'yet again'\n" "write_file(" + wpath + ", VAR): OK = 1\n" "OUT = $$cat(" + wpath + ", lines)" << "OK = 1\nOUT = 'this is text' 'yet again'" << "" << true; QTest::newRow("write_file(): truncate") << "VAR = 'other content'\n" "write_file(" + wpath + ", VAR): OK = 1\n" "OUT = $$cat(" + wpath + ", lines)" << "OK = 1\nOUT = 'other content'" << "" << true; // FIXME: This also tests that 'exe' is accepted, but does not test whether it actually works. QTest::newRow("write_file(): append") << "VAR = 'one more line'\n" "write_file(" + wpath + ", VAR, append exe): OK = 1\n" "OUT = $$cat(" + wpath + ", lines)" << "OK = 1\nOUT = 'other content' 'one more line'" << "" << true; QString vpath = QMakeEvaluator::quoteValue(ProString(m_outdir)); QTest::newRow("write_file(): fail") << "write_file(" + vpath + "): OK = 1" << "OK = UNDEF" #ifdef Q_OS_WIN << "##:1: Cannot write file " + QDir::toNativeSeparators(m_outdir) + ": Access is denied." #else << "##:1: Cannot write file " + m_outdir + ": Is a directory" #endif << true; QTest::newRow("write_file(): bad number of arguments") << "write_file(1, 2, 3, 4): OK = 1" << "OK = UNDEF" << "##:1: write_file(name, [content var, [append] [exe]]) requires one to three arguments." << true; QTest::newRow("write_file(): invalid flag") << "write_file(file, VAR, fail): OK = 1" << "OK = UNDEF" << "##:1: write_file(): invalid flag fail." << true; // FIXME: This doesn't test whether it actually works. QTest::newRow("touch()") << "touch(" + wpath + ", files/other.txt): OK = 1" << "OK = 1" << "" << true; QTest::newRow("touch(): missing target") << "touch(" EVAL_DRIVE "/does/not/exist, files/other.txt): OK = 1" << "OK = UNDEF" #ifdef Q_OS_WIN << "##:1: Cannot open " EVAL_DRIVE "/does/not/exist: The system cannot find the path specified." #else << "##:1: Cannot touch /does/not/exist: No such file or directory." #endif << true; QTest::newRow("touch(): missing reference") << "touch(" + wpath + ", " EVAL_DRIVE "/does/not/exist): OK = 1" << "OK = UNDEF" #ifdef Q_OS_WIN << "##:1: Cannot open reference file " EVAL_DRIVE "/does/not/exist: The system cannot find the path specified." #else << "##:1: Cannot stat() reference file /does/not/exist: No such file or directory." #endif << true; QTest::newRow("touch(): bad number of arguments") << "touch(1): OK = 1\ntouch(1, 2, 3): OK = 1" << "OK = UNDEF" << "##:1: touch(file, reffile) requires two arguments.\n" "##:2: touch(file, reffile) requires two arguments." << true; QString apath = QMakeEvaluator::quoteValue(ProString(m_outdir + "/a/path")); QTest::newRow("mkpath()") << "mkpath(" + apath + "): OK = 1\n" "exists(" + apath + "): OKE = 1" << "OK = 1\nOKE = 1" << "" << true; QString bpath = QMakeEvaluator::quoteValue(ProString(m_outdir + "/fail_me")); QTest::newRow("mkpath(): fail") << "write_file(" + bpath + ")|error(FAIL)\n" "mkpath(" + bpath + "): OK = 1" << "OK = UNDEF" << "##:2: Cannot create directory " + QDir::toNativeSeparators(m_outdir + "/fail_me") + '.' << true; QTest::newRow("mkpath(): bad number of arguments") << "mkpath(1, 2): OK = 1" << "OK = UNDEF" << "##:1: mkpath(file) requires one argument." << true; #if 0 // FIXME ... insanity lies ahead QTest::newRow("cache()") << "" << "" << "" << true; #endif } void tst_qmakelib::proEval_data() { QTest::addColumn("in"); QTest::addColumn("out"); QTest::addColumn("msgs"); QTest::addColumn("ok"); QTest::newRow("empty") << "" << "VAR = UNDEF" << "" << true; addAssignments(); addExpansions(); // Variable, etc. expansions on RHS addControlStructs(); // Conditions, loops, custom functions QString qindir = QMakeEvaluator::quoteValue(ProString(m_indir)); addReplaceFunctions(qindir); // Built-in replace functions addTestFunctions(qindir); // Built-in test functions // Some compound tests that verify compatibility with odd Qt 4 edge cases QTest::newRow("empty (leading)") << "defineTest(myMsg) { message(\"$$1\") }\n" "XMPL = /this/is/a/test\n" "message(split: $$split(XMPL, /))\n" "message(split joined:$$split(XMPL, /))\n" "message(\"split quoted: $$split(XMPL, /)\")\n" "myMsg(my split: $$split(XMPL, /) :post)\n" "myMsg(my split joined:$$split(XMPL, /):post)\n" "myMsg(\"my split quoted: $$split(XMPL, /) post\")\n" "OUT = word $$split(XMPL, /) done\n" "message(\"assign split separate: $$OUT\")\n" "OUT = word:$$split(XMPL, /):done\n" "message(\"assign split joined: $$OUT\")\n" "OUT = \"word $$split(XMPL, /) done\"\n" "message(\"assign split quoted: $$OUT\")\n" << "" << "Project MESSAGE: split: this is a test\n" "Project MESSAGE: split joined: this is a test\n" "Project MESSAGE: split quoted: this is a test\n" "Project MESSAGE: my split: this is a test :post\n" "Project MESSAGE: my split joined: this is a test:post\n" "Project MESSAGE: my split quoted: this is a test post\n" "Project MESSAGE: assign split separate: word this is a test done\n" "Project MESSAGE: assign split joined: word: this is a test:done\n" "Project MESSAGE: assign split quoted: word this is a test done" << true; QTest::newRow("empty (multiple)") << "defineTest(myMsg) { message(\"$$1\") }\n" "XMPL = //this///is/a/////test\n" "message(split: $$split(XMPL, /) :post)\n" "message(split joined:$$split(XMPL, /):post)\n" "message(\"split quoted: $$split(XMPL, /) post\")\n" "myMsg(my split: $$split(XMPL, /) :post)\n" "myMsg(my split joined:$$split(XMPL, /):post)\n" "myMsg(\"my split quoted: $$split(XMPL, /) post\")\n" "OUT = word $$split(XMPL, /) done\n" "message(\"assign split separate: $$OUT\")\n" "OUT = word:$$split(XMPL, /):done\n" "message(\"assign split joined: $$OUT\")\n" "OUT = \"word $$split(XMPL, /) done\"\n" "message(\"assign split quoted: $$OUT\")\n" << "" << "Project MESSAGE: split: this is a test :post\n" "Project MESSAGE: split joined: this is a test:post\n" "Project MESSAGE: split quoted: this is a test post\n" "Project MESSAGE: my split: this is a test :post\n" "Project MESSAGE: my split joined: this is a test:post\n" "Project MESSAGE: my split quoted: this is a test post\n" "Project MESSAGE: assign split separate: word this is a test done\n" "Project MESSAGE: assign split joined: word: this is a test:done\n" "Project MESSAGE: assign split quoted: word this is a test done" << true; // Raw data leak with empty file name. Verify with Valgrind or asan. QTest::newRow("QTBUG-54550") << "FULL = " EVAL_DRIVE "/there/is\n" "VAR = $$absolute_path(, $$FULL/nothing/here/really)" << "VAR = " EVAL_DRIVE "/there/is/nothing/here/really" << "" << true; } static QString formatValue(const ProStringList &vals) { QString ret; foreach (const ProString &str, vals) { ret += QLatin1Char(' '); ret += QMakeEvaluator::quoteValue(str); } return ret; } static void skipNoise(const ushort *&tokPtr) { forever { ushort tok = *tokPtr; if (tok != TokLine) break; tokPtr += 2; } } static bool compareState(QMakeEvaluator *eval, ProFile *out) { bool ret = true; const ushort *tokPtr = out->tokPtr(); forever { skipNoise(tokPtr); ushort tok = *tokPtr++; if (!tok) break; if (tok != TokHashLiteral) { qWarning("Expected output is malformed: not variable%s", qPrintable(QMakeParser::formatProBlock(out->items()))); return false; } const ProKey &var = out->getHashStr(tokPtr); tok = *tokPtr++; if (tok != TokAssign) { qWarning("Expected output is malformed: not assignment%s", qPrintable(QMakeParser::formatProBlock(out->items()))); return false; } ProStringList value; value.reserve(*tokPtr++); forever { skipNoise(tokPtr); tok = *tokPtr++; if (tok == TokValueTerminator) break; if (tok != (TokLiteral | TokNewStr)) { qWarning("Expected output is malformed: not literal%s", qPrintable(QMakeParser::formatProBlock(out->items()))); return false; } value << out->getStr(tokPtr); } ProValueMap::Iterator it; ProValueMap *vmap = eval->findValues(var, &it); if (value.length() == 1 && value.at(0) == "UNDEF") { if (vmap) { qWarning("Value of %s is incorrect.\n Actual:%s\nExpected: ", qPrintable(var.toQString()), qPrintable(formatValue(*it))); ret = false; } } else { if (!vmap) { qWarning("Value of %s is incorrect.\n Actual: \nExpected:%s", qPrintable(var.toQString()), qPrintable(formatValue(value))); ret = false; } else if (*it != value) { qWarning("Value of %s is incorrect.\n Actual:%s\nExpected:%s", qPrintable(var.toQString()), qPrintable(formatValue(*it)), qPrintable(formatValue(value))); ret = false; } } } return ret; } void tst_qmakelib::proEval() { QFETCH(QString, in); QFETCH(QString, out); QFETCH(QString, msgs); QFETCH(bool, ok); QString infile = m_indir + "/test.pro"; bool verified = true; QMakeTestHandler handler; handler.setExpectedMessages(msgs.replace("##:", infile + ':').split('\n', QString::SkipEmptyParts)); QMakeVfs vfs; ProFileCache cache; QMakeParser parser(&cache, &vfs, &handler); QMakeGlobals globals; globals.do_cache = false; globals.xqmakespec = "fake-g++"; globals.environment = m_env; globals.setProperties(m_prop); globals.setDirectories(m_indir, m_outdir); ProFile *outPro = parser.parsedProBlock(QStringRef(&out), "out", 1, QMakeParser::FullGrammar); if (!outPro->isOk()) { qWarning("Expected output is malformed"); verified = false; } ProFile *pro = parser.parsedProBlock(QStringRef(&in), infile, 1, QMakeParser::FullGrammar); QMakeEvaluator visitor(&globals, &parser, &vfs, &handler); visitor.setOutputDir(m_outdir); #ifdef Q_OS_WIN visitor.m_dirSep = ProString("\\"); #else visitor.m_dirSep = ProString("/"); #endif QMakeEvaluator::VisitReturn ret = visitor.visitProFile(pro, QMakeHandler::EvalAuxFile, QMakeEvaluator::LoadProOnly); if (handler.printedMessages()) { qWarning("Got unexpected message(s)"); verified = false; } QStringList missingMsgs = handler.expectedMessages(); if (!missingMsgs.isEmpty()) { foreach (const QString &msg, missingMsgs) qWarning("Missing message: %s", qPrintable(msg)); verified = false; } if ((ret == QMakeEvaluator::ReturnTrue) != ok) { static const char * const lbl[] = { "failure", "success" }; qWarning("Expected %s, got %s", lbl[int(ok)], lbl[1 - int(ok)]); verified = false; } if (!compareState(&visitor, outPro)) verified = false; pro->deref(); outPro->deref(); QVERIFY(verified); }